Peavey 112MX - Manual
Peavey 112MX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Figure 1; Impedance; Figure 2
- Page 3 – + 2 YEAR LIMITED WARRANTY; Figure 4; Figure 3
- Page 4 – SP; Features and specifications subject to change without notice.
SP
™
112MX
SPECIFICATIONS
Frequency response, 1 meter
on-axis, swept-sine in anechoic
environment:
120 Hz — 14 kHz (±3 dB)
Usable low frequency limit
(-10 dB point):
73 Hz
Power handling:
Full Range:
500 W continuous
1,000 W program
2,000 W peak
Low Frequency Section:
500 W continuous
1,000 W program
2,000 W peak
High Frequency Section:
60 W continuous
120 W program
240 W peak
Sound pressure level, 1 Watt,
1 meter in anechoic environment:
Full Range:
100.0 dB SPL, (2.83 V input)
Low Frequency Section:
100.0 dB SPL, (2.83 V input)
High Frequency Section:
106.0 dB SPL, (2.83 V input)
Maximum sound pressure level
(1 meter):
Full Range:
125.0 dB SPL continuous
131.0 dB SPL peak
Low Frequency Section:
126.0 dB SPL continuous
132.0 dB SPL peak
High Frequency Section:
123.8 dB SPL continuous
129.8 dB SPL peak
Transducer complement:
Low Frequency Section:
1x 12 in. woofer, sealed
1208 SPS-8 BWX
High Frequency Section:
1x .875 in. exit/51 mm voice coil
compression driver on CD horn
RX
™
22 on a CH
®
-3
Harmonic distortion:
1% rated power
2nd Harmonic:
100 Hz:
1.66%
1 kHz:
0.49%
3rd Harmonic:
100 Hz:
0.63%
1 kHz:
0.44%
10% rated power
2nd Harmonic:
100 Hz:
4.05%
1 kHz:
2.13%
3rd Harmonic:
100 Hz:
2.67%
1 kHz:
0.52%
Crossover frequency (internal
passive):
Low Frequency — High Frequency:
1,350 Hz
Recommended active crossover
frequency region and slope:
Low Frequency — High Frequency:
1,600 Hz at 18 dB/octave
Time offset:
Low Frequency:
0.00 ms
High Frequency:
0.27 ms
Impedance (Z):
Full Range:
Nominal:
8.0 Ω
Minimum:
6.2 Ω
Low Frequency:
Nominal:
8.0 Ω
Minimum:
6.9 Ω
High Frequency:
Nominal:
8.0 Ω
Minimum:
7.1 Ω
Input connections:
2x 1/4 in. phone jack and 1x Neutrik
®
NL4 Speakon
®
(biamp)
S P E C S
P E A V E Y
E L E C T R O N I C S
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Enclosure materials and finish: 3/4" OSB finished in black carpet Mounting provisions: This unit is not designed for overheadsuspension.SA 1 stand mounted adaptor Dimensions (H x W x D): Front: 15.25 in. x 22.25 in. x 15.00 in.387 mm x 565 mm x 381 mm Net weight: 50 lbs. (22.7 kg) Features: • ...
3 Architectural and EngineeringSpecifications The loudspeaker system shall have an operating bandwidth of 120 Hz - 14 kHz.The nominal output level shall be 98.0 dBwhen measured at a distance of onemeter with an input of one Watt. Thenominal impedance shall be 8.0 Ohms.The maximum continuous power ha...
SP ™ 112MX INPUT Features and specifications subject to change without notice. Peavey Electronics Corporation • 711 A Street • Meridian • MS • 39301 (601) 483-5365 • FAX (601) 486-1278 • www.peavey.com ©2001 Printed in the U.S.A. 4/01 80304856
