PASCO PS-2102 - Manual
PASCO PS-2102 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
®
I n s t r u c t i o n S h e e t
0 1 2 - 0 7 3 0 8 G
p H S e n s o r
P S - 2 1 0 2
Included Parts
1.
pH amplifier
2.
pH electrode
3.
Storage bottle containing storage solution
Additional Part Required
•
PASPORT interface or datalogger
Related Parts
•
Replacement electrode (PASCO part 699-195)
•
Flat-surface electrode (PS-2182)
•
pH buffer set (SC-2321)
Q u i ck S t a r t
1.
Connect the amplifier to your PASPORT interface.
2.
Connect the pH electrode to the amplifier.
3.
If you are using a computer, connect the PASPORT interface
to it and start DataStudio.
4.
Remove the storage bottle from the electrode.
5.
Rinse the electrode with distilled water.
6.
Immerse the end of the electrode in the solution to be mea-
sured.
7.
Press or click the start button to begin recording data.
I n t ro d u c t i o n
The pH Sensor measures the pH of a solution. The measurement
is recorded and displayed by the connected computer or datalog-
ger. The pH Sensor is well-suited for continuous recording and
discrete measurements.
S e t - u p
Connecting the Parts
1.
Plug the sensor’s PASPORT connector into any port of a
PASPORT interface or datalogger.
2.
Push the connector at the end of the electrode cable onto the
sensor’s electrode connector. Twist the connector to lock it in
place.
Connecting the electrode and interface
3.
If you are using a computer, connect the PASPORT interface
to it and start DataStudio.
to PASPORT
interface
pH electrode
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
