PASCO WA-9897 - Manual
PASCO WA-9897 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Screen Assembly; Description
- Page 3 – Ripple Tank Assembly; S e t u p; Apply Surfactant; To reduce the problem of surface tension, let the foam beaches soak; C l e a nu p
- Page 4 – T e c h n i c a l S u p p o r t; Te ch n i c a l S u p p o r t; For assistance with any PASCO product, contact PASCO at:; Address: PASCO scientific
- Page 5 – Page; Product and Company Identification; Product Name; EMERGENCY TELEPHONE NUMBER; Local Emergency Contact:; Identification; Emergency Overview; Material Safety Data Sheet; The Dow Chemical Company
- Page 6 – measures
- Page 7 – Handling and Storage; Handling; Exposure Controls / Personal Protection; Exposure Limits; Physical and Chemical Properties
- Page 8 – Stability and Reactivity; Stability/Instability; Acute Toxicity; Information; CHEMICAL FATE
- Page 9 – ECOTOXICITY; Considerations; DOT Bulk; OSHA Hazard Communication Standard; Fire Hazard; Reactive Hazard; Sudden Release of Pressure Hazard
- Page 10 – Product Literature
- Page 11 – Hazard Rating System; NFPA; Recommended Uses and Restrictions
I n s t r u c t i o n S h e e t
0 1 2 - 1 0 0 3 4 B
R i p p l e Ta n k
WA - 9 8 9 7
800-772-8700
www.pasco.com
®
I n t ro d u c t i o n
The PASCO model WA-9897 Ripple Tank is designed to be used
with the PASCO model WA-9896 Ripple Generator and Light
Source. The tank is 42.5 cm by 42.5 cm by 2.5 cm with four foam
“beaches” and a 0.3 cm thick glass plate. The viewing area is 33
cm by 33 cm. The tank has an easy-to-use drain pipe consisting
of a piece of flexible vinyl plastic tubing and a tube clamp. The
tank is supported by three detachable legs with adjustable feet
and comes with a reflector and projection screen.
The ripple tank also comes with the following: ruler, pipette, sur-
factant bottle, storage box, barriers (5 pieces), refractors (3
pieces), a beaker, and a rod for supporting a light source. The list
of included parts is given below.
Ripple Tank
Reflector
Storage
Box
Beaker, 1000
mL
Projection
Screen
Rod
Barriers
Ruler
Refractors
Surfactant
Bottle
Pipette, 5 mL
Leg
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
® M o d e l N o . W A - 9 8 9 7 I t e m s 2 I t e m s D e s c r i p t i o n s The box in which the Ripple Tank is stored has two layers. The screen assembly, plastic storage box, rod, and beaker are in the top layer, and the ruler, legs, and Ripple Tank assembly are in the bot-tom layer. The top lay...
® M o d e l N o . W A - 9 8 9 7 S e t u p 3 Ripple Tank Assembly The ripple tank assembly has an impact resistant plastic frame. Below the front edge of the frame is a strip of Velcro® ‘hook’ material that will hold the ‘loop’ material on the top edge of the projector screen. Below the back edge of ...
® M o d e l N o . W A - 9 8 9 7 T e c h n i c a l S u p p o r t 4 To empty the tank, place a container under the drain pipe and open the tube clamp. When the water stops flowing, raise the corner of the tank opposite to the drain hole so the rest of the water will drain out. Leave the tube clamp in ...
