PASCO CI-6742 - Manual
PASCO CI-6742 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Equipment; Additional Equipment Required:; Using the Motion Sensor II; ScienceWorkshop interface and sensor so the
- Page 3 – Figure 3; Mounting the Motion Sensor II onto a Dynamics Cart; Figure 2; Mounting the Motion Sensor II on a rod stand; Figure 1; Mounting the Motion Sensor II on a Dynamics Track; . Open a Graph display in ScienceWorkshop.
- Page 4 – Limited Warranty; Note: This instruction sheet was written; Motion Sensor II CI-6742
Instruction Sheet
for the PASCO
Model CI-6742
Motion Sensor II
012-06757B
08/98
$1.00
© 1998 PASCO scientific
Introduction
The PASCO CI-6742 Motion Sensor II is a sonar
ranging device with a sensing range of 0.15 to about 8
meters. When used with an interface, the Motion
Sensor II emits ultrasonic pulses and detects pulses
returned as echoes from the target. The
ScienceWorkshop
program calculates the distance to
the object from the speed of sound and half the sonic
pulse round trip time. The program can also calculate
velocity and acceleration from the distance and time
measurements. The trigger rate for the Motion Sensor
can be set in the
ScienceWorkshop
program to
trigger as few as 5 times per second (for recording
relatively slow events over large distances) or for as
many as 120 times per second (for quick events such
as a free-fall experiment).
The CI-6742 Motion Sensor II has several
improved features, compared to the CI-6529
Motion Sensor:
• reduced minimum distance of operation
• reduced sensitivity to false targets
• front panel LED that lights when the Motion
Sensor acquires the target
• additional mounting and positioning options
• compatibility with Texas Instruments
®
and
Casio
®
scientific calculator-sensor interfaces
• compatibility with ULI interfaces
Important Operating Note: When operating in
the Std. mode, it may be necessary to tilt the
transducer up 5-10 degrees for best
performance, as shown.
yellow phone
plug (Connect to
digital channels
1, 2, or 3.)
black phone
plug (Connect to
digital channels
2, 3, or 4.)
spring clips
Narrow/Std.
switch
target
indicator
LED
ultrasonic
transducer
positioning
dial
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Motion Sensor II 012-06757B 2 Equipment Included: • PASCO CI-6742 Motion Sensor II • detachable cable with two color-coded phone plugs Additional Equipment Required: • computer and ScienceWorkshop 500, 700, or 750 Interface o r • scientific calculator and sensor interface (Texas Instruments or Casio...
012-06757B Motion Sensor II 3 Figure 3 Mounting the Motion Sensor II onto a Dynamics Cart CartAccessoryAdapter Attach the ME-6743Cart Accessory Adapter(available separately)here. Figure 2 Mounting the Motion Sensor II on a rod stand Figure 1 Mounting the Motion Sensor II on a Dynamics Track Slide th...
Motion Sensor II 012-06757B 4 Limited Warranty PASCO scientific warrants the product to be free from defects in materials and workmanship for a period of one year from the date of shipment to the customer. PASCO will repair or replace, at its option, any part of the product which is deemed to be def...
