PASCO CI-6583 - Manual
PASCO CI-6583 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Q u i c k S t a r t; Quick Start; The; Equipment used with the sensor
- Page 3 – I n t r o d u c t i o n; Mounting the Rotary Motion Sensor; Mounting the Rotary Motion Sensor on a PASCO Track
- Page 4 – Mounting the Rotary Motion Sensor to a Large “A” Base; Mounting the Rotary Motion Sensor to a Gyroscope; Attaching Accessories to the Rotary Motion Sensor
- Page 5 – Using the Mini-Rotational Disk; Pendulum Setup
- Page 6 – Downloadable Experiments; Check the “User Resources” tab and then download the experiments..
- Page 7 – Using the Rotary Motion Sensor with Data Acquisition Software; ScienceWorkshop; PASCO Capstone Sensor Setup; PASCO Capstone Hardware Setup panel
- Page 8 – Select “Rotary Motion Sensor” and click OK; Confirm the Rotary Motion Sensor; Click the Sensor Properties icon
- Page 9 – PASCO Capstone Display Setup; Click “Stop” to end data recording.; Select “Linear Accessory”; Select “Angular Velocity”
- Page 10 – SPARKvue Setup
- Page 11 – Touch “Linear Scale” and tap a choice; Touch “Angular Velocity” and
- Page 12 – Technical Support; For assistance with any PASCO product, contact PASCO at:; Limited Warranty; Copyright; Trademarks; Product End of Life Disposal Instructions:; be disposed of in a standard
I n s t r u c t i o n M a n u a l
0 1 2 - 1 3 9 9 0 A
Rotary Motion Sensor
CI-6538
*See the PASCO catalog or the PASCO web site at www.pasco.com for more information.
Experiments for the Rotary Motion Sensor in electronic format are available to download
from the PASCO web site at www.pasco.com. For downloadable experiments, go to
www.pasco.com and enter CI-6538 in the Search window. Check the User Resources tab.
Equipment Included
Equipment Included
Rotary Motion Sensor (CI-6538)
Three-step Pulley and O-ring
Rod Clamp
Hex Key (Allen wrench)
Required Items*
Information
PASCO Interface
see www.pasco.com
PASCO Data Acquisition Software
see www.pasco.com
Items to Consider*
Information
PASPORT Digital Adapter
PS-2159
Phone Jack Extender Cable (2)
PI-8117
Sensor Phonon
Plugs
Rod clamp
O-ring for
Three-step
Pulley
Three-step
pulley
Hex Key
(Allen wrench)
Thumbscrew
T-Slot
Additional
mounting
position for
rod clamp
(1 of 2)
Yellow Plug
Black Plug
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
® M o d e l N o . C I - 6 5 3 8 Q u i c k S t a r t 2 012-13990A Quick Start • Plug the Sensor Phone Plugs into two adjacent DIGITAL INPUT ports of a PASCO interface (such as the 850 Univer-sal Interface). For example, plug the yellow plug into DIGI-TAL INPUT 1 and the black plug into DIGITAL INPUT ...
® M o d e l N o . C I - 6 5 3 8 I n t r o d u c t i o n 3 012-13990A Mounting the Rotary Motion Sensor The rod clamp fits rods up to 12.7 mm in diameter, such as the ME-8736 45 cm Stainless Steel Rod, and the rod clamp can be attached to the sensor in three different locations: at the end oppo-site ...
® R o t a r y M o t i o n S e n s o r I n t r o d u c t i o n 4 Mounting the Rotary Motion Sensor to a Large “A” Base The Rotary Motion Sensor can be mounted on the base of the Rotating Platform (ME-8951) using the “A” Base Rotational Adapter (CI-6690, available separately). The “A” Base Rotational ...
