Paradyne 3174 - Manual - manualsarea.com

Page 3 - ACCULINK; Quick Reference; Product Documentation Online

1 ACCULINK ® 3172 and 3174 E1 DSU/CSU Quick Reference Document Number 3170-A2-GL10-10 July 2001 Product Documentation Online Complete documentation for this product is available at www.paradyne.com. Select Library → Technical Manuals → T1/E1 Digital Access Devices. Select the following document: 317...

Page 4 - Quick Start Procedure; Procedure; Ferrite Choke

2 Quick Start Procedure The following procedure is for experienced DSU/CSU users who are familiar with the 317x DSU/CSU installation process and have no special requirements for their application. See the ACCULINK 317x E1 Data Service Unit/Channel Service Unit Operator’s Guide for more information. ...

Page 5 - Cabling Examples; NETWORK

3 Cabling Examples The DSU/CSU is supplied with an AC power module. You must provide the DTE and network cables. Optional cables that you can order from the company are described in Pin Assignments in the Operator’s Guide. NOTE: The 120 Ω /75 Ω switch selects either the 120-ohm balanced network inte...

Page 6 - Configuration Options

4 Configuration Options Configuration options are accessed from the Cnfig branch of the front panel menu. DSU E1 CEPT Stat Test 98-14606a DevHs STest Perf TStat LED ID E1 Prt n Rlpbk Lpbk Ptrns Lamp Cnfig Ctrl Rel ClrReg Reset CID LED DL DTE Prt1 Prt2 Prt3 Prt4 PLB DLB RLB LLB Abort DCLB DTLB Abort ...

Page 7 - Enab; Option; Disab

5 Factory default configuration options are shown in boldface type in the following tables. Table 1. DTE Interface Configuration Options Option Factory Comments/Description DTE Port: Enab Enables the use of the DTE Drop/Insert port. Disab DTE Frame: CRC4 Selects framing format. noCRC DTE Coding: AMI...

Page 10 - Rsvd; Meaning; Unassigned

8 Table 4. DTE Channel Configuration Options Option Factory Comments/Description DTE Channels: TS16 Selects TS16 for signaling or assigns DS0 channels on the DTE Drop/Insert interface to DS0 channels on the network interface. Assign TS16: Data Specifies whether time slot 16 is reserved for signaling...

Page 11 - NET; Block

9 Table 5. Data Port Channel Configuration Options (1 of 2) Option Factory Comments/Description Assign To: NET Assigns this port to channels on the Network or DTE Drop/Insert interface, or to another port. DTE Prt n Assign By: Block Determines how channels are assigned: contiguous blocks or individu...

Page 18 - Important Safety Instructions

16 Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. This product is intended to be used with a 3-wire grounding type plug – a plug which has a grounding pin. This is a safety feature. Equipment grounding is vita...

Page 19 - EMI Notices; UNITED STATES – EMI NOTICE:

17 10. In addition, if the equipment is to be used with telecommunications circuits, take the following precautions: — Never install telephone wiring during a lightning storm. — Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. — Never touch u...

Page 20 - CE Marking

18 CE Marking Models 3172-A1-410 and 3174-A1-410 of this product are marked with the CE mark. This mark has been affixed to demonstrate full compliance with the following European Directives: Directive 73/23/EEC – Council Directive of 19 February 1973 on the harmonization of the laws of the member...

Paradyne 3174 - Manual

Table of Contents:

Summary

Other Paradyne Models