Paradyne 3161 CSU - Manual
Paradyne 3161 CSU – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Quick Start Procedure; ACCULINK 316x Data Service Unit/Channel Service Unit
- Page 4 – Turn on the power to the 3000 Series Carrier.
- Page 5 – configuration procedures in Chapter 3,
- Page 6 – Configuration Options
- Page 7 – Table 1. DTE Interface Configuration Options
- Page 9 – Table 3. Network Interface Configuration Options
- Page 10 – Table 4. DTE Drop/Insert Port Channel Configuration Options
- Page 13 – Table 6. General Configuration Options
- Page 19 – Table 10. Management Trap Configuration Options
ACCULINK 3161 DSU/CSU
QUICK REFERENCE
Document No. 3161-A2-GL11-40
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TM 1 ACCULINK 3161 DSU/CSUQuick Reference Document Number 3161-A2-GL11-40 February 1998 Quick Start Procedure The following procedure is for experienced DSU/CSU users who are familiar with the3161 DSU/CSU installation process and have no special requirements for theirapplication. See the ACCULINK 31...
2 3. Attach the network cable to the Auxiliary Backplane using either a 50-pin cable or the T1 Network Interface Adapter. Connect the other end of the network cable tothe connection provided by the telephone company. 496-14386-03 Auxiliary Backplane over Slots 9–16 COMSPHERE 3000 Series Carrier (Rea...
3 5. Insert the DSU/CSU circuit card into the appropriate slot in the carrier. The power-up self-test begins. 495-14797 6. If you intend to use front panel emulation, connect the cable from the PC to Port 2 on the Auxiliary Backplane using the COM port adapter and COM-port-to-PC cable. 7. If you do ...
