Paradyne Hotwire 5446 - Manual

Paradyne Hotwire 5446

Paradyne Hotwire 5446 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
Page: / 23

Table of Contents:

  • Page 2 – Package Checklist; What Does the Hotwire 5446 RTU Do?
  • Page 3 – DSL Access with a Hotwire 5038 Distributed POTS Splitter
  • Page 4 – DSL Access without a POTS Splitter; Network
  • Page 5 – Installing the DSL Access Wiring; Procedure; Important Safety; Punchdown Block
  • Page 7 – RJ11 Wall Jack; or; Wiring can be run from the
  • Page 8 – Installing the Hotwire 5446 RTU; Hotwire RTU; Customer
  • Page 11 – Optional RTU Wall Placement
  • Page 12 – RTU Hardware Template
  • Page 13 – Status LEDs; LED; ON
  • Page 14 – Troubleshooting; LED Symptom
  • Page 15 – Hotwire 5446 RTU Next Hop Router Support
  • Page 16 – Network Service Provider Example; Example using TCP/IP Network Settings with Windows 95:
  • Page 17 – Increasing the Number of End-User Systems; This section is reference information.; Function
  • Page 19 – Hotwire 5446 RTU Technical Specifications; Item
  • Page 20 – Important Safety Instructions
  • Page 21 – Declaration of Conformity; Japan; Notices
  • Page 22 – To Users of Digital Apparatus in Canada:; Notice to Users of the Canadian Telephone Network
  • Page 23 – Document Feedback
Loading the manual

TM

1

Hotwire

5446 RTU Customer Premises

Installation Instructions

Document Number 5446-A2-GN10-60

May 1999

Before You Begin

The Hotwire

5446 RTU (Remote Termination Unit) interoperates with the Hotwire 8546

DSL Card in the DSLAM (Digital Subscriber Line Access Multiplexer) system.

An optional POTS (Plain Old Telephone Service) splitter is available for the Hotwire
5446 RTU. When a POTS splitter is installed, the telephone and 5446 RADSL (Rate
Adaptive Digital Subscriber Line) RTU can function at the same time over the same pair
of copper wires. In order to confirm the RTU installation, the POTS splitter should be
installed first.

To install a POTS splitter, refer to the appropriate POTS splitter document:

Document Number

Document Title

5030-A2-GN10

Hotwire 5030 POTS Splitter Customer Premises
Installation Instructions

5038-A2-GN10

Hotwire 5038 Distributed POTS Splitter Customer
Premises Installation Instructions

Contact your sales or service representative to order additional product documentation.

Paradyne documents are available on the World Wide Web at www.paradyne.com.
Select

Library

→

Technical Manuals.

Wiring and Cables Needed

The following wiring and standard connectors are used with this product:

New or existing unshielded twisted-pair wiring (CAT3 or better). The CAT3 wiring
must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

Standard RJ11 wall jack.

Standard Ethernet 8-pin, non-keyed modular plug for a PC or workstation. An
Ethernet straight-through or crossover cable is used. Refer to

Installing the Hotwire

5446 RTU, page 8, for Ethernet cable details.

After the RTU is installed and powered on, there are additional requirements in order to
utilize the DSL and Ethernet connections. Refer to

Hotwire 5446 RTU IP Setup,

page 16.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Package Checklist; What Does the Hotwire 5446 RTU Do?

2 Package Checklist Verify that your package contains the following: - Model 5446 Remote Termination Unit (RTU) - DSL interface cable with RJ11 connectors - Power cord with power transformer Refer to Cables & Connectors, page 17, for standard pin numbers. Be sure to register your warranty at www...

Page 3 - DSL Access with a Hotwire 5038 Distributed POTS Splitter

3 98-16105 Punchdown Block or NID DSL Jack RTU Customer Premises (CP) DSL Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Demarcation Point Local Loop CP POTS Splitter DSL – Digital Subscriber Line POTS – Plain Old Telephone Service NID – Network Interface Device RTU – Remote Terminat...

Page 4 - DSL Access without a POTS Splitter; Network

4 DSL Access without a POTS Splitter When the Hotwire 5446 RTU is installed without a POTS splitter, a second telephonewiring pair is needed for DSL access. 98-16104 Punchdown Block or NID DSL Jack RTU Customer Premises (CP) POTS DSL Ethernet Crossover Cable Ethernet Cable or Central Office (CO) Dem...

Other Paradyne Models

All Paradyne Other