Panasonic WV-SP300 Series - Manual

Table of Contents 1 Monitor images on a PC ..........................................................................9 1.1 Monitor images from a single camera .............................................................................9 1.2 About the “Live” page .......................................

10.3 Access copy images saved on the SD memory card onto the PC [SD memory card images] (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502, NW502S, SW115) ..............................61 10.4 Configure the settings relating to the logs [Log] (S...

13.3 Configure the settings relating to H.264 recording [Alarm] (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502, NW502S, SW115) ..............................................................................................139 13.4 Configure t...

1 Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. 1.1 Monitor images from a single camera Note • SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4. 1. Start up the web browser. 2. Enter the IP address designated using th...

1.2 About the “Live” page Note • SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4. A T M B C D E G H J K L I F N O P S Q R U [select language] pull-down-menu The camera’s display language can be selected. The default language can be set in the [Language] in the[Basic] settin...

1.3 Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras)can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras inadvance. 4 cameras can be registered as a grou...

2 Monitor images on a cellular phone/mobile terminal 2.1 Monitor images on a cellular phone It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)from the camera on the screen of the cellular phone. It is also possible to refresh images to disp...

“https://IP address: (colon) + port number/mobile” or “https://Host name registered in the DDNS server:(colon) + port number/mobile” *1 IP address is the global WAN IP address of the router that can be accessed via the Internet. *2 When “User auth.” is set to “On” ( ® page 153), only users with the ...

3 Record images on the SD memory card manually (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502, NW502S, SW115) Images displayed on the “Live” page can be recorded on the SD memory card manually. This button is operableonly when “Manual” is se...

4 Action at an alarm occurrence The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur. 4.1 Alarm type • Terminal alarm SW355 SW355 SW352 SW352 SF346 SF346 SF342 SF342 SF335 SF335 SW316L SW316L SW316 SW316 SP306 SP306 SP305 SP305 SP302 SP302 NP502 N...

IMPORTANT SW355 SW355 SW352 SW352 SF346 SF346 SF342 SF342 SF335 SF335 SW316L SW316L SW316 SW316 SP306 SP306 SP305 SP305 SP302 SP302 SW155 SW155 SW152 SW152 NP502 NP502 SW115 SW115 : • Select “FTP error” for “Save trigger” on the [SD memory card] tab when using the SD memory card.When “Alarm input” o...

About the log list window Number of the listed logs Total number of the logs of the selected log type and a number of the log being displayed on the top of the loglist will be displayed. Note • Enter the desired log number and press the [Enter] key on the keyboard. The log of the designatednumber wi...

7 Playback of images on the SD memory card (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502, NW502S, SW115) When clicking a time and date listed on the log list window, the “Live” page will turn to the “Playback” page.When images associated wi...

7.1 About the playback page Number of images When clicking a time and date listed on the log list window, total number of images associated with the clickedtime and date, and the number of the currently displayed image will be displayed. Note • Enter the desired number of image and press the [Enter]...

When the mouse button is released, the increment of the image number will stop and the image numberdisplayed at the moment when the mouse button is released will be displayed. [LAST] button The last image will be displayed. Browse [Start] button The selected image will be downloaded onto the PC. Bef...

8 About the network security 8.1 Equipped security functions The following security functions are featured in this camera. Access restrictions by the host authentication and the user authenticationIt is possible to restrict users from accessing the camera by setting the host authentication and/or th...

9 Display the setup menu from a PC The settings of the camera can be configured on the setup menu. IMPORTANT • The setup menu is only operable by users whose access level is “1. Administrator”. Refer topage 153 for how to configure the access level. 9.1 How to display the setup menu 1. Display the “...

9.2 How to operate the setup menu A B Menu buttonsSetup page 1. Click the desired button in the frame on the left of the window to display the respective setup menu.When there are tabs at the top of the “Setup” page displayed in the frame on the right of the window, clickthe desired tab to display a...

9.3 About the setup menu window Note • SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4. N B CDEFGHIJKL M A [Setup] button Display the “Setup” page. [Live] button Display the “Live” page. [Basic] button Displays the “Basic” page. The basic settings such as time and date and ...

10 Configure the basic settings of the camera [Basic] The basic settings such as camera title, time and date, SD memory card *1 and the logs *1 can be configured on the “Basic” page. The “Basic” page has 3 tabs; the [Basic] tab, the [SD memory card] tab *1 and the [Log] tab *1 . *1 SW355 SW355 SW352...

The following port numbers are unavailable since they are already in use.20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 443 *3 , 995, 10669, 10670 [Automatic installation of viewer software] Determine whether or not to install the viewer software from this camera. • On: Installs the vie...

The settings relating to the SD memory card can be configured on this page. SD memory card [SD memory card] Select “Use” or “Not use” to determine whether or not to use the SD memory card. • Default: Use 54 Operating Instructions 10 Configure the basic settings of the camera [Basic]

Common [Remaining capacity notification] When the E-mail notification function or the Panasonic alarm protocol function is used to provide notificationof the remaining capacity of the SD memory card, select a level to be notified at from the following.50%/ 20%/ 10%/ 5%/ 2% • Default: 50% Note • Noti...

• When “H.264” is selected for “Recording format”, select the image capture size for “H.264 recording”- “Image capture size” on the [SD memory card] tab. • When “Alarm input” is selected for “Save trigger”, images will be saved with the image capture sizeselected on the [Alarm] tab of the “Alarm” pa...

64kbps/ 128kbps/ 256kbps/ 384kbps/ 512kbps/ 768kbps/ 1024kbps/ 1536kbps/ 2048kbps/ 3072kbps/4096kbps • Default: 1536kbps [Image quality] Select the quality for H.264 images to be recorded from the following.Low(Motion priority)/ Normal/ Fine(Image quality priority) • Default: Normal Note • When “Con...

– Save/obtain images recorded using the SD memory recording function of Panasonic network diskrecorder – Play/download images on the SD memory card • When an SD memory card is formatted while another user is in operation, the operation will becanceled. • It is impossible to access the SD memory card...

Image capture size: VGA Capacity of SD memory card Image quality 0 Super fine 1 Fine 2 3 4 32 GB 160,000 224,000 256,000 288,000 320,000 16 GB 80,000 112,000 128,000 144,000 160,000 8 GB 40,000 56,000 64,000 72,000 80,000 4 GB 20,000 28,000 32,000 36,000 40,000 2 GB 10,000 14,000 16,000 18,000 20,00...

Image capture size: QVGA Capacity of SD memory card Image quality 0 Super fine 1 Fine 2 3 4 32 GB 384,000 416,000 432,000 448,000 480,000 16 GB 192,000 208,000 216,000 224,000 240,000 8 GB 96,000 104,000 108,000 112,000 120,000 4 GB 48,000 52,000 54,000 56,000 60,000 2 GB 24,000 26,000 27,000 28,000...

10.4 Configure the settings relating to the logs [Log](SW355, SW352, SF346, SF342, SF336, SF335, SF332,SW316L, SW316, SP306, SP305, SP302, SW155,SW152, NP502, NW502S, SW115) Click the [Log] tab on the “Basic” page. ( ® page 42, page 44) The settings relating to the log list can be configured in this...

Select “On” or “Off” and designate the destination folder in the same manner as for “Alarm”. Note • When “Recording format” is set to “H.264”, “Save logs” is set to “On” or “Off” depending on the settingof “Save trigger”. • Schedule saving is available only when “H.264” is selected for “Recording fo...

11 Configure the settings relating to images and audio [Image/Audio] Note • SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4. SW314 SW314 SW155 SW155 SW152 SW152 SF135 SF135 SF132 SF132 SP105 SP105 SP102 SP102 SW115 SW115 : • The “Image” page is displayed instead of the “Ima...

11.3 Configure the settings relating to JPEG images[JPEG/H.264] (or [JPEG/MPEG-4]) Note • SW155, SW152, SW115, SF135, SF132, SP105, and SP102 do not support MPEG-4. Click the [JPEG/H.264] tab (or [JPEG/MPEG-4] tab) on the “Image/Audio” page. ( ® page 42, page 44) JPEG Configure the settings such as ...

• On: The super dynamic function will work. • Off: The super dynamic function will not work. • Default: On Note • When the following are observed depending on the light condition, select “Off” for “SuperDynamic(SD)”. – When flickering appears or the color changes on the screen – When noise appears i...

Off: SW355 SW355 SW352 SW352 SW316L SW316L SW316 SW316 SW314 SW314 SW155 SW155 SW152 SW152 Note • When “Off” is selected for “Super Dynamic(SD)”, the interactive control with face detection isdeactivated. [Adaptive black stretch] Select “On” or “Off” to determine whether or not to activate the darkn...

11.8 Adjust the zoom and focus (SW316L, SW316) Click the [Setup>>] button of “Zoom/Focus adjustment” on the [Image quality] tab of the “Image/Audio” page.( ® page 92) It is possible to adjust the angular field of view and the focus of the lens using the zoom/focus function. Zoom/Focus adjustme...

11.13 Configure the VIQS setting Click the [Setup>>] button of “VIQS” on the [Image quality] tab of the “Image/Audio” page. ( ® page 92) VIQS is an abbreviation of Variable Image Quality on Specified area and is a feature that enables you to changethe images of a specified area.It is possible ...

11.14 Configure the VIQS area The VIQS area is specified by following the steps below. 1. Drag the mouse on the screen to specify the area. → The specified area is displayed with a white frame. Note • A selectable area is limited. 2. Select [On]/[Off] to activate/deactivate a distributed image of [V...

12 Configure the multi-screen settings [Multi-screen] The cameras from which images are to be displayed on a multi-screen can be registered on the“Multi-screen” page. ( ® page 42, page 44) [IP address] Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can...

13 Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, theVMD area settings, and the alarm occurrence notification can be configured on this page.The “Alarm” page has 3 tabs; the [Alarm] tab, the [VMD area] tab...

• AUX output: AUX output will be supplied. The [AUX] buttons will be displayed on the “Live” page. • Exposure output NP502 NP502 : CCD exposure timing pulse output will be supplied (Close output is only supplied during CCD exposure). • Default: Off [Terminal] SF346 SF346 SF342 SF342 SF335 SF335 SP30...

13.2 Configure the settings relating to the alarmimage [Alarm] Click the [Alarm] tab on the “Alarm” page. ( ® page 42, page 44) The settings relating to the alarm image to be transmitted to an FTP server can be configured in this section.The alarm image will be transmitted to an FTP server. To trans...

• Available number of characters: 1 - 32 characters • Unavailable characters: " & * / : ; < > ? \ | • Default: None (blank) [Post alarm] • Transmission interval Select the transmission interval for the alarm image transmission to the FTP server from the following.0.1fps/ 0.2fps/ 0.33fp...

13.4 Configure the settings relating to the alarmoutput terminal [Alarm] (SW355, SW352, SF346,SF342, SF336, SF335, SF332, SW316L, SW316,SP306, SP305, SP302, NP502, NW502S) Click the [Alarm] tab on the “Alarm” page. ( ® page 42, page 44) The settings relating to the alarm output terminal can be confi...

13.5 Change the AUX name [Alarm] (SW355, SW352,SF346, SF342, SF336, SF335, SF332, SW316L,SW316, SP306, SP305, SP302, NP502, NW502S) Click the [Alarm] tab on the “Alarm” page. ( ® page 42, page 44) The names of “AUX”, “Open” and “Close” on the “Live” page can be changed. AUX title [AUX (Up to 10 char...

[Detection area] Adjust the size of the VMD area using the slider. The smaller the selected value is, the higher the sensitivityof VMD area becomes. The current value (1-10) will be displayed on the right of the slider. • Default: 1 [Detection sensitivity] Adjust the sensitivity of motion detection ...

[E-mail notification] Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings forthe “Alarm” and “Diag.” checkboxes of “Destination of notification” below. – When an alarm is detected (“Alarm”) SW355 SW355 SW352 SW352 SF346 SF346 SF342 SF342 SF335...

Note SW355 SW355 SW352 SW352 SF346 SF346 SF342 SF342 SF335 SF335 SW316L SW316L SW316 SW316 SP306 SP306 SP305 SP305 SP302 SP302 SW155 SW155 SW152 SW152 NP502 NP502 SW115 SW115 : • Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” whenthe SD memory card ha...

Note • When “On” is selected, notification of the alarm occurrence will be provided to the registered destinationserver addresses in order (to IP address 1 first, to IP address 8 last). [Additional alarm area data(VMD)] Determine whether or not to send notifications for the alarm area number of VMD ...

14 Configure the setting relating to the image recognition [Advanced func.] (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L, SW316, SW314, SP306, SP305, SP302, SW155, SW152, SF135, SF132, NP502, NW502S, SW115) The setting relating to the XML notification, destinations of information about t...

The XML notification notifies the server of face detection information in XML format. XML notification [XML notification] Select “On” or “Off” to determine whether or not to notify face detection information using XML. • Default: Off [Notification data] Select the type of data notification. Select o...

Note • When [Notification data] is set to “Detection info.(Original)”, the [Notification interval] can only be setto “1s” or “2s”. Destination setting for XML notification [Destination address] Configure the IP address or the host name of the destination for XML notification. • Available number of c...

IMPORTANT • The face detection function shall not guarantee the detection of faces in an image. The face detectionaccuracy varies with imaging conditions. Face detection [Face detection] Determine whether or not to enable the face detection function. • On: Information about the face detection frame ...

15 Configure the settings relating to the authentication [User mng.] The settings relating to the authentication such as users and PCs restrictions for accessing the camera with aPC or cellular phone/mobile terminal can be configured on the “User mng.” page.The “User mng.” page has 3 tabs; the [User...

The description below is the configuration of the priority stream that can transmit images without deterioratingthe image quality and refresh interval even when multiple users access concurrently. Priority stream [Activation] Select “On” or “Off” to determine whether or not to use the priority strea...

16 Configure the settings of the servers [Server] The settings relating to the E-mail server, the FTP server and the NTP server can be configured on this page.The “Server” page has 3 tabs; the [E-mail] tab, the [FTP] tab and the [NTP] tab. 16.1 Configure the settings relating to the E-mailserver [E-...

16.3 Configure the settings relating to the NTP server[NTP] Click the [NTP] tab on the “Server” page. ( ® page 42, page 44) The settings relating to the NTP server such as the NTP server address, port number, etc. can be configuredon this page. IMPORTANT • Use an NTP server when the more accurate ti...

IPv4 network [Network Settings] Select the method of how to configure the IP address from the following. • Static: The IP address is configured by entering manually on “IP address(IPv4)”. • DHCP: The IP address is configured using the DHCP function. • Auto(AutoIP): The IP address is configured using...

Note • When “Auto(AutoIP)” is selected and the IP address cannot be obtained from the DHCP server, an IPaddress not used in the same network will be searched within 169.254.1.0 - 169.254.254.255. [IP address(IPv4)] When not using the DHCP function, enter the IP address of the camera. Do not enter an...

UPnP This camera support UPnP (Universal Plug and Play). By using the UPnP function, it becomes possible toconfigure the following automatically. • Configuration of the port forwarding function of the router (However, a router supporting UPnP is required.)This configuration is useful when accessing ...

• Default: 443 The following port numbers are unavailable since they are already in use.20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000-61000 Note • The camera will restart after the connection setting is changed. • When using the self-signed certificate: If...

• When the CRT key is updated, the log of the previous CRT key is saved. When the [History] button of“Current CRT key” on the “CRT key generate” dialog box is clicked, the “Previous CRT key” dialog boxwill be displayed, and it is possible to check the key size and generation time & date of the p...

Note • This camera generates the CSR file in the PEM format. 17.2.4 Installation of the server certificate IMPORTANT • If the CSR file is not generated, it is impossible to install the server certificate (security certificate). Forthe installation, the server certificate issued by CA is required. 1....

• When the server certificate has expired, the HTTPS function will become unavailable. When thecamera is restarted, the connection protocol will be changed to HTTP. Update the server certificatebefore it expires. • The expiration date of the server certificate can be checked by double-clicking the s...

IMPORTANT • When the HTTPS port number is changed from “443”, enter “https://IP address of the camera + :(colon) + port number” in the address box of the browser.( Example: https://192.168.0.11:61443) • When the camera is in a local network, configure the proxy server setting of the web browser (und...

11. Click “OK”. → When the browser is restarted after the certificate is imported, “Certificate Error” will not be displayed. 17.4 Configure the settings relating to DDNS [DDNS] Click the [DDNS] tab on the “Network” page. ( ® page 42, page 44) To access this camera via the Internet, it is necessary ...

17.4.1 Configuration of the DDNS service (Example of the“Viewnetcam.com” service) A C A B E D D B C E A. DNS server B. Internet C. Provider D. “Viewnetcam.com” service server E. Remote site Global address is changed. The contracted provider allocates a global address to the router (or the camera). T...

17.6 Configure the settings relating to the FTPperiodic image transmission [FTP img. trans.] Click the [FTP img. trans.] tab on the “Network” page. ( ® page 42, page 44) The settings relating to the periodic transmission of images to an FTP server can be configured on this page.To transmit images to...

18 Configure the settings relating to the schedules [Schedule] On the “Schedule” page, it is possible to configure the settings relating to schedules as follows. • Alarm permission (Alarm input will be received only in the specified schedule.) • VMD permission (Video motion detection will be active ...

3. Click the radio button respective to the desired option to determine whether or not to initialize the settingsafter completing the firmware upgrade. Note • Note that the settings cannot be restored after an initialization is operated. 4. Click the [Execute] button. → The confirmation window will ...

20 About the displayed system log Error indications relating to SMTP Category Indication Description POP3 server error Authentication error. • Entered user name or password may beincorrect. Check if the E-mail settings areconfigured correctly. Failed to find the POP3 server. • The IP address of the ...

21 Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or aproblem is not described below. Symptom Cause/solution Reference pages Cannot access from the webb...

Information Bar Depending on the OS installed on the PC, the following may occur. Follow the instructions below when thefollowing has occurred. By performing the following solutions, other applications may not be affected. When using Internet Explorer 9 or Internet Explorer 10: The “Information Bar”...

22 Directory structure of drive B (SW355, SW352, SF346, SF342, SF336, SF335, SF332, SW316L, SW316, SP306, SP305, SP302, SW155, SW152, NP502, NW502S, SW115) Drive B FTP ALARM 100101 100102 File name.01 0123 10010112.01 10010112.02 LOCAL PULL File name.01 10010112.01 10010112.02 00000000 00000000 M_AL...