Page 2 - CAUTION; ENGLISH VERSION
-2- WARNING: To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. The serial number of this product may be foun...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS; ENGLISH
-3- IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's i...
Page 4 - LIMITATION OF LIABILITY; DISCLAIMER OF WARRANTY
-4- LIMITATION OF LIABILITY THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED,INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR ANY PAR-TICULAR PURPOSE, OR NON-INFRINGEMENT OF THE THIRD PARTY'S RIGHT.THIS PUBLICATI...
Page 5 - FEATURES
Digital Flip Operation q Tilting downwards w The picture is flipped when the camera is pointing straight down (at around 135 ° ). e Tilting upwards. Digital flip is performed only when the system controller joystick is held downwards. -5- This Color CCTV Camera is a video surveillance devicethat inc...
Page 6 - PRECAUTIONS
-6- PRECAUTIONS ■ Do not attempt to disassemble the camera. To prevent electric shock, do not remove screws orcovers.There are no user-serviceable parts inside.Ask qualified service personnel for servicing. ■ Handle the camera with care. Do not misuse the camera. Avoid striking, shaking, etc.The cam...
Page 7 - About the Camera Cleaning Function
-7- ■ About the Camera Cleaning Function Prolonged use can lead to noise on the monitor anddivergence of preset positions. If such conditions persist even after you perform cam-era cleaning (page 41), use the special setup menu toexecute the "REFRESH" operation (page 50). If you are using a ...
Page 8 - CONTENTS
-8- CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................................................................ 3LIMITATION OF LIABILITY ............................................................................................... 4DISCLAIMER OF WARRANTY ......................................
Page 9 - CONSTRUCTION
-9- CONSTRUCTION Ensuring Trouble-free Operation • This camera uses a "slip ring" for transmission of electrical power and signals. A dirty slip ring can cause deterio- ration of picture quality during panning and generation of noise. In order to ensure trouble-free camera operation, make su...
Page 10 - INSTALLATION PRECAUTIONS; Camera Installation Location
-10- INSTALLATION PRECAUTIONS Warning: Discuss the installation location for the camera withyour retailer, and select a place that is strongenough for the installation. If you install the cameraon a ceiling or wall, except for accidents caused byfault in the camera, Panasonic holds absolutely noresp...
Page 11 - DIP SWITCH SETTINGS; Switches 2 through 4:; DIP Switch 1
-11- Important: Before setting up the camera for a configurationwhere the camera's RS485 data port is used forcamera control (pan, tilt, etc.) by the system con-troller, the camera's DIP switches must be con-figured to specify the unit number and communi-cation parameters. (This page) If DIP switch ...
Page 13 - RS485 Communication Parameters (DIP Switch 1)
-13- 1 2 3 4 ON 5 6 7 8 DIP Switch 1 Unit Number 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 3 4 ON 5 6 7 8 1 2 ...
Page 14 - CAMERA INSTALLATION; Cutout in Diecast Case; Installing the Camera
-14- CAMERA INSTALLATION ■ Preparing the Camera andDecorative Cover for Side CableExit The camera and decorative cover should be preparedas shown below when mounting the camera on a ceil-ing or wall with its cables (power, video output, RS485,alarm in, alarm out) exiting from the side. The camera mo...
Page 15 - a. Sideway Cable Exit
-15- 5. Hook the fall prevention wire on the camera mount- ing base. Cautions: • Use the supplied dust protection sheet if the camera mounting base is liable to be exposed to a dustyatmosphere. Remove the cover from the dust pro-tection sheet, then stick the sheet on the cameramounting base. • Remov...
Page 16 - UNINSTALLING THE CAMERA; Uninstalling the Camera
-16- UNINSTALLING THE CAMERA Caution: Make sure you perform the steps below carefullyand exactly when uninstalling the camera and deco-rative cover. Failure to do so creates the risk of dam-age to the camera. ■ Uninstalling the Camera The camera and its base unit are secured by screws.This configura...
Page 17 - CONNECTIONS; CAUTIONS; Precautions; • 24 V AC Power Supply Connection
-17- CONNECTIONS How to Assemble the Cable with the AccessoryConnector Strip back the cable jacket approx. 3 mm (0.1 inch) andseparate the individual conductors. Prepare the individual conductors for clamping. UseMOLEX band tool part number 57027-5000 (for UL-Style Cable UL1015) or 57026-5000 (for U...
Page 20 - USING THE SETUP MENU; Setup Menu
USING THE SETUP MENU ■ Setup Menu Setup menus are shown in the diagram below. You can adapt the camera to your requirements by setting up therespective items in these menus. Menus are incorporated in a hierarchical structure, from the setup menu at the topto manual mask area selection at the bottom....
Page 22 - Setup Menu Description; Presetting
-22- ■ Setup Menu Description ● Presetting (1) Position (POSITION SET) Aligns the camera position and focal point by pan-ning, tilting, zooming and focusing.See page 27 for the setting. (2) Preset Identification (PRESET ID) Assigns the name for preset IDs (identification of upto 16 alphanumeric char...
Page 23 - • ALC Mode with BLC ON
-23- ● Special 1 Menu (1) Privacy Zone (PRIVACY ZONE) This setting is used for masking unwanted zones,hiding them from display on the monitor screen.Up to 8 zones can be registered. Submenus areprovided for zone number selection and parametersetting. See page 35 for details. (2) Proportional Pan-Til...
Page 24 - • ALC Mode with BLC OFF
-24- • ALC Mode with BLC OFF In this mode, the picture is divided into 48 areas. Ifthere is a source of brightness that interferes withthe clarity of the picture in these masks, correspon-ding areas mask the light to keep the clarity of thepicture.Generally, when a light from the background is toost...
Page 26 - Preset Menu; Preset Menu Display; SETTING PROCEDURES; Menu Display; Setup Menu Display
■ Preset Menu ● Preset Menu Display 1. Displaying the preset menu directly (1) Move the cursor to PRESET 1 O and select the position number with the joystick. (2) Press the CAM (SET) button. The preset setting menu appears on the monitorscreen. 2. Displaying the preset menu from the PRESET NUM-BER S...
Page 28 - To Set the Lens Zoom and Focus Positions
● Preset Identification Setting (PRESETID) 1. Move the cursor to PRESET ID on the preset settingmenu and select ON or OFF with the joystick.The factory default setting is OFF. ON: Preset ID appears on the monitor screen. OFF: Preset ID does not appear. 2. Press the CAM (SET) button to display the pr...
Page 30 - To Return to the Setup Menu
See the pages below for the settings respectively.Shutter speed: page 44AGC: page 45Electronic sensitivity enhancement: page 45White balance: page 46Motion detector: page 47Auto focus: page 48 ● Preset Speed Setting (PRESETSPEED) Move the cursor to PRESET SPEED and select a speedwith the joystick. ●...
Page 31 - Deleting Preset Positions
-31- ■ Deleting Preset Positions 1. Move the cursor to PRESET 1 and select the position number to be deleted with the joystick. 2. Press the CAM (SET) button to display the preset setting menu. 3. Move the cursor to DEL and press the CAM (SET) button. This deletes the preset position and the PRESETN...
Page 32 - Auto Mode Selection (AUTO
This determines the starting point and the cursormoves to END. (3) Move the joystick to select a panning endpoint and press the CAM (SET) button.This determines the endpoint and the cursormoves to POSITION. 4. To set a panning speed Move the cursor to SPEED, and set a panningspeed with the joystick....
Page 33 - Auto Pan Key Setting (AUTO PAN
-33- OFF: The camera pans from the starting point to the endpoint, and rotates backward to the startingpoint.This movement is repeated over and over. 6. To set a dwell time Move the cursor to DWELL TIME and select a dwelltime with the joystick. Dwell time changes as follows: (unit: s) 7. To set pan ...
Page 34 - Password Verification
● Password Lock (PASSWORD LOCK) Caution: For security, do not operate your VCR for recordingwhile the password menus are displayed on themonitor. A 3-digit number is used for a password to limitaccess to all settings. 1. Move the cursor to PASSWORD LOCK, then select ON or OFF with the joystick. Note...
Page 35 - New Password
-35- 3-4 To cancel an incomplete password, move the cursor to RESET, and press the CAM (SET) but-ton. The screen returns to the verification menu. 3-5 To return to the SET UP MENU menu without ver- ifying the password, move the cursor to RET, andpress the CAM (SET) button. New Password 4. To change ...
Page 38 - Area Title Editing
To Quit Editing • To return to the AREA TITLE menu, move the cursor to RET, and press the CAM (SET) button. • To cancel one area title, move the cursor to RESET in the AREA TITLE menu, and press the CAM (SET)button. • To return to the SPECIAL 1 menu, move the cursor to RET, and press the CAM (SET) b...
Page 39 - Patrol Play with the AUTO PAN Button
-39- • DIGITAL FLIP• PRIVACY ZONE• CAMERA ID• PROPO.PT• PAN LIMIT• ZOOM LIMIT• TILT ANGLE• CLEANING After starting the patrol-learn, the following manualoperations are stored. • PAN/TILT/ZOOM/FOCUS operation• IRIS operation• Preset positioning The auto focus function is disabled during the patrolope...
Page 40 - COAXIAL ALARM OUT
CNT-CLS 1, 2 (Output) Two contact closure signals (Open collector type) areoutput through the Alarm Output connector. 1. Move the cursor to CNT-CLS 1, and select OFF, ALARM or AUX 1 with the joystick.The factory default setting is OFF.When ALARM is selected, TIME OUT appears.Select an appropriate du...
Page 42 - Camera Setting; To Display the Camera Setting Menu
■ Camera Setting ● To Display the Camera Setting Menu Move the cursor to CAMERA O , and press the CAM (SET) button. The camera setting menu appears. ● Camera Identification (CAMERA ID) 1. Move the cursor to CAMERA ID, and select ON to display the camera identification with the joystick. 2. Follow th...
Page 50 - • To Restore the Camera Default Position; Reset to the Factory Default Settings
After a blemish compensation position is set up, (*)is attached at the right of the number. 3. If you would like to delete a blemish compensation position, move the cursor to the applicable numberand press the CAM (SET) button. The blemish compensation position setting screenappears. Press the F3 bu...
Page 51 - Factory Default Setting
-51- Menu TOP MENU SPECIAL 1 CAMERA MENU SPECIAL 2 HOME POSITION SELF RETURN AUTO MODE AUTO PAN KEY DIGITAL FLIP PASSWORD LOCK PRIVACY ZONE PROPO.P/T AREA TITLE PATROL CLEANING EL-ZOOM PRESET ALM IMAGE HOLD TILT ANGLE CAMERA ID ALC/MANUAL BLC SHUTTER AGC SENS UP SYNC WHITE BAL MOTION DET AF MODE CHR...
Page 52 - SPECIFICATIONS
Auto Focus Zoom Ratio Focus Speed F1.6 - 22, CLOSE Focal Length BLC selectable ON/OFF (SETUP MENU)x 22 +digital zoom x10 approx. 4.5 s (TELE/WIDE) in manual modeapprox. 5 s (FAR/NEAR) in manual modeautomatic (open/close is possible)/manual1 : 1.6 (WIDE) - 3.0 (TELE)3.79 - 83.4 mm2.6 ° - 52.3 °2.0 ° ...
Page 54 - SHORTCUTS; Controller Operation
-54- SHORTCUTS Shortcuts are supported when you are using the system controller that has a CAM FUNCTION button. With shortcuts,you can configure camera functions by inputting function codes on the 10-key pad and then pressing the CAMFUNCTION button. The following is a list of all of the shortcuts th...
Page 56 - TROUBLESHOOTING; Reference Pages
-56- TROUBLESHOOTING Before requesting service, check the following symptoms to see if you can solve the problem yourself. If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are notcovered here, contact a quality service person or system instal...
Page 58 - Periodically check the power cord and plug.
-58- Picture is different from theposition setting. Upper part of the picture isblack when the camera is ina horizontal orientation. Reference Pages Cause and Recommended Action Problem • Adjust the picture using the preset menu and a scene file. • This is caused by the camera's internal cover. It d...
