Panasonic WV-BP142 - Manual

1. The following functions are built in.

(1) Auto Light Control (ALC)/Electronic Light

Control (ELC)

(2) Back Light Compensation
(3) Line-locked Sync or Multiplexed Vertical

Drive (VD2) (only for WV-BP140 and WV-
BP144)/Internal Sync or VD2 (only for
WV-BP142)

2. Signal-to-noise ratio of 46 dB

(Equivalent to AGC Off)

FEATURES

3. Minimum illumination of 0.08 lux (0.008 foot-

candle) with F1.4 lenses

4. Horizontal resolution of 380 lines

5. Shooting of indoor scenes with fixed iris lens

by use of Electronic Light Control (ELC) func-
tion

6. Selectable auto iris control signal for the lens

from a video signal or DC control signal

1. Do not attempt to disassemble the camera.

To prevent electric shock, do not remove
screws or covers.
There are no user serviceable parts inside.
Ask a qualified service person for servicing.

2. Handle the camera with care.

Do not abuse the camera. Avoid striking,
shaking, etc. The camera could be damaged
by improper handling or storage.

3. Do not expose the camera to rain or

moisture, or try to operate it in wet areas.

Turn the power off immediately and ask a
qualified service person for servicing.
Moisture can damage the camera and also
create the danger of electric shock.

4. Do not use strong or abrasive detergents

when cleaning the camera body.

Use a dry cloth to clean the camera when
dirty.
In case the dirt is hard to remove, use a mild
detergent and wipe gently. Afterwards, wipe
off the remained part of the detergent in it
with a dry cloth.

5. Clean the CCD faceplate with care.

Do not clean the CCD with strong or abrasive
detergents. Use lens tissue or a cotton tipped
applicator and ethanol.

6. Never face the camera towards the sun.

Do not aim the camera at bright objects.
Whether the camera is in use or not, never
aim it at the sun or other extremely bright
objects. Otherwise, blooming or smear may
be caused.

PRECAUTIONS

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

N0301-0

V8QA5750AN

Printed in Japan

N

19

Model No.

WV-BP140
WV-BP142
WV-BP144

CCTV Cameras

Operating Instructions

cs

c

(Lens Option)

PREFACE

Panasonic’s WV-BP140/BP142/BP144 series intro-
duce a new level of high picture quality and high
resolution through the use of a 1/3-inch interline
transfer CCD image sensor having 510 horizontal

pixels (picture elements). This model offers cut-
ting-edge technology for advanced video surveil-
lance.

The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and mainte-
nance (servicing) instructions in the
literature accompanying the appli-
ance.

The lightning flash with arrowhead
symbol, within an equilateral trian-
gle, is intended to alert the user to
the presence of uninsulated "dan-
gerous voltage" within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The serial number of this product may be found on
the bottom of the unit.
You should note the serial number of this unit in the
space provided and retain this instruction as a per-
manent record of your purchase to aid identification
in the event of theft.

Model No.

Serial No.

SA 1966

SA 1965

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC

SHOCK DO NOT OPEN

NOTE: This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial environ-
ment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instruction manu-
al, may cause harmful interference to radio com-
munications.
Operation of this equipment in a residential area is
likely to cause harmful interference in which case
the user will be required to correct the interference
at his own expense.

FCC Caution: To assure continued compliance,
(example - use only shielded interface cables when
connecting to computer or peripheral devices). Any
changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate this equipment.

For U.S.A