Page 2 - CAUTION
2 WARNING: To reduce the risk of electric shock, do not remove cover or back.No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. T h e l i g h t n i n g f l a s h w i t h arrow-head within a triangle is in tend ed to tell the user that parts inside the product are a ri...
Page 3 - Important Safety Instructions
3 Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s ins...
Page 4 - Table of Contents; Dear Panasonic Customer; from your new Plasma Display.
4 Table of Contents Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future...
Page 5 - FCC STATEMENT
5 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radia...
Page 6 - Safety Precautions; When using the Plasma Display
6 Safety Precautions This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industria...
Page 7 - Safety Precautions / Maintenance; WARNING; Maintenance; Setup; AC Power Supply Cord; If problems occur during use
7 Safety Precautions / Maintenance WARNING The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-free cloth. • If the surface is particularly dirty, wipe with a soft, lint-free cloth which has been soaked in pure water or...
Page 8 - Accessories; Precaution on battery use; Accessories Supplied; Check that you have the Accessories and items shown; Remote Control Batteries
+ - + - 8 Accessories Requires two AA batteries. 2. I n s e r t b a t t e r i e s - n o t e c o r r e c t polarity ( + and -). Precaution on battery use Incorrect installation can cause battery leakage and corrosion that will damage the remote control transmitter.Disposal of batteries should be in a...
Page 9 - Connections
1 2 SERIAL PC IN AUDIO SLOT1 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN SLOT2 1 2 1 2 1 2 9 Connections – Cable fi xing band Secure any excess cables with band as required. Note: Make sure that the AC cord is locked on both the left and right sides. Push until t h e h o o k clicks....
Page 10 - PC Input Terminals connection
AUDIO PC IN 10 PC Input Terminals connection Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The disp...
Page 11 - SERIAL Terminals connection
SERIAL 6 7 8 9 1 3 4 5 2 11 Connections SERIAL Terminals connection Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only.• Additional equipment and cables shown are not supplied with this set. The SERIAL terminal con...
Page 12 - COMPONENT / RGB connection
PC SLOT1 SLOT2 SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN HDMI AV OUT HDMI AV OUT SLOT3 P R /C R /R P B /C B /B Y/G AUDIO R L COMPONENT/RGB IN AUDIO OUT Y , P B , P R , OUT P R P B Y L R COMPONEN T VIDEO OUT 12 Connections COMPONENT / RGB connection Notes: • Change the “COMPONENT/R...
Page 15 - Initial selections; Selecting the On-Screen Menu Language
1/2 SIGNAL PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABELPOWER SAVE SET UP SCREENSAVER INPUT MENU ENTER/ + / VOL - / INPUT MENU ENTER/ + / VOL -/ 15 Initial selections Selecting the On-Screen Menu Language Selecting t...
Page 16 - Basic Controls; Main Unit
INPUT MENU ENTER/ + / VOL -/ 16 Basic Controls MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen will switch. (see page 22) INPUT button(INPUT1, INPUT2, INPUT3 and PC selection) (see page 15) Main Power On / Off Switch Power Indicator The Power Indicator will light. • Power-...
Page 17 - Remote Control Transmitter
17 Basic Controls POWER button The Plasma Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 13).Press this button to turn the Plasma Display On, from Standby mode. Press it again to turn the Plasma Display Off to Standby mode. ACTION button Press to make...
Page 18 - ASPECT Controls
INPUT MENU ENTER/ + / VOL -/ 18 ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options:For details about the aspect mode, please see “List of Aspect Modes” (p...
Page 19 - MULTI PIP
A B A B A B B A B A B A PC1 VIDEO2 PC1 VIDEO2 VIDEO2 VIDEO1 PC1 VIDEO2 A A A C B B B D 19 Press repeatedly.Each time pressing this button main picture and sub picture will be displayed as follows below. Press to swap main picture and sub picture. Press to select the input mode.Under main Picture and...
Page 20 - Advanced PIP
20 MULTI PIP Advanced PIP Notes: • If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.• Sound output is from the picture which is selected in AUDIO OUT (PIP) (see page 26).• In 2 screen display, the same input mode cannot be selected for the main picture a...
Page 21 - Digital Zoom
INPUT MENU ENTER/ + / VOL -/ 2 EXIT 2 1 EXIT × 1 × 2 × 3 × 4 21 VOL button Digital Zoom This displays an enlargement of the designated part of the displayed image. Select the area of the image to be enlarged. Press on the enlargement location to select. Return to normal display (quit Digital Zoom). ...
Page 22 - On-Screen Menu Display; Remote Control; Overview
2/2 ADVANCED SETTINGS COLOR TEMP COLOR MANAGEMENT NORMAL OFF ON PICTURE 0 NORMAL NORMALIZE AUTO SETUP POS. /SIZE V-POS 0 H-POS V-SIZE DOT CLOCK H-SIZE CLOCK PHASE 0 0 0 0 1/2 SIGNAL SET UP PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELE...
Page 24 - PICTURE Adjustments
2/2 ADVANCED SETTINGS COLOR TEMPCOLOR MANAGEMENT NORMAL OFF ON PICTURE 1/2 25 0 0 0 5 PICTURE NORMAL NORMALIZE STANDARD BRIGHTNESS SHARPNESS PICTURE MENU COLOR PICTURE TINT 00 2.2 1/2 BLACK EXTENSION AGC GAMMA INPUT LEVEL ADVANCED SETTINGS NORMAL NORMALIZE OFF 00 00 00 2/2 W/B LOW B W/B HIGH R W/B L...
Page 26 - SOUND Adjustment; SDI Sound Output
0 0 0 1/2 SOUND NORMAL NORMALIZE STANDARD OFF TREBLE AUDIO MENU BALANCE BASS 0 MID SURROUND MAIN AUDIO OUT (PIP) 26 SOUND Adjustment Note: BASS, MID, TREBLE and SURROUND settings are memorized separately for each AUDIO MENU. 1 Press to display the SOUND menu. Press to select the menu to adjust. Sele...
Page 27 - PRESENT TIME SETUP / SET UP TIMER
99:99 MON PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET PRESENT TIME OF DAY DAY 0:00 0:00 SET UP TIMER POWER OFF FUNCTION POWER ON FUNCTION OFF OFF PRESENT TIME OF DAY 99:99 POWER OFF TIME POWER ON TIME 2/2 SET UP MULTI DISPLAY SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATION LANDSCA...
Page 28 - FUNCTION selection; SCREENSAVER; Setup of SCREENSAVER Time
1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABELPOWER SAVE SET UP SCREENSAVER START FUNCTION WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY 6:15 12:30 OFF OFF SIDE BAR ADJUST BRIGHT...
Page 29 - Reduces screen image retention; SCREENSAVER (For preventing image retention)
SCREENSAVER START FUNCTION MODE SIDE BAR ADJUST WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY OFF 6:15 12:30 BRIGHT OFF OFF PRESENT TIME OF DAY 99:99 SCREENSAVER START FUNCTION MODE WOBBLING PEAK LIMIT FINISH TIME START TIME SCROLLING BAR ONLY OFF 6:15 12:30 OFF OFF SIDE BAR ADJUST B...
Page 30 - Reduces power consumption
1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 30 Reduces power consumption Press to select “POWER SAVE”“STANDBY SAVE”“POWER MANAGEMENT”“AUTO POWER OFF”. Press to select “ON” o...
Page 31 - Customizing the Input labels
2/2 SET UP MULTI DISPLAY SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATION LANDSCAPE 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 31 Press to select INPUT LABEL. Pres...
Page 32 - How to setup MULTI DISPLAY; SET UP for MULTI DISPLAY
2/2 SET UP MULTI DISPLAY SETUP SET UP TIMER PRESENT TIME SETUP DISPLAY ORIENTATION LANDSCAPE 32 By lining up Plasma Displays in groups, for example, as illustrated below, an enlarged picture may be displayed across all screens. For this mode of operation, each plasma display has to be set up with a ...
Page 33 - ID Cancellation; ID Remote Control Function
You can set the remote control ID when you want to use this remote control on one of several different displays. Note: To operate this function, please purchase ID remote controller sold separately.Object model : EUR7636070R 33 SET UP for MULTI DISPLAY 123 Switch to on the right side. Press the butt...
Page 34 - SET UP for Input Signals; COMPONENT / RGB IN SELECT
1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABEL SIGNAL SCREENSAVER POWER SAVE SET UP 1/2 PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) YUV/RGB-IN SELECT RGB INPUT LABEL S...
Page 35 - SIGNAL menu; – For NTSC AV images
1/2 SIGNAL SCREENSAVER PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABELPOWER SAVE SET UP 3D Y/C FILTER (NTSC)COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWNPanasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] NOISE REDUCTION OFF REFRESH...
Page 36 - COLOR SYSTEM / Panasonic AUTO; XGA MODE
3D Y/C FILTER (NTSC) COLOR SYSTEM SIGNAL ON AUTO 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) OFF 4:3 [ VIDEO ] 3 : 2 PULLDOWN OFF XGA MODE 1024 × 768 36 3:2 PULLDOWN COLOR SYSTEM / Panasonic AUTO Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) inputsignal mode.(“SIGNAL [VIDEO]” menu is display...
Page 37 - REFRESH RATE; NOISE REDUCTION; Advanced NR
REFRESH RATE 100 Hz q ADVANCED NR [ VIDEO ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADVANCED NR [ Digital ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADVANCED NR [ COMPONENT ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ADVANCED NR [ RGB ] MOSQUITO NR VIDEO NR BLOCK NR OFF OFF OFF ( ) NOISE REDUCTIO...
Page 38 - SYNC; Setting RGB sync signal; Input signal display
SYNC SIGNAL [ RGB ] 3 : 2 PULLDOWNXGA MODE AUTO OFF 1024 × 768 SYNC AUTO SYNC ON G SYNC VBS H-FREQ. V-FREQ. kHz Hz 63.98 60.02 SIGNAL FORMAT 1280×1024/60 38 SET UP for Input Signals Select SIGNAL from the “SET UP” menu during RGB input signal. SYNC Setting RGB sync signal Confi rm that the input is ...
Page 39 - Options Adjustments
Options Weekly Command Timer 1/3 Initial INPUT Onscreen display On O f f Off Off 0 0 Maximum VOL level Initial VOL level Off INPUT lock Off Button lock Off Remocon User level Off Advanced PIP Options Enable Off-timer function Normal Initial Power Mode 0 ID select Off Remote ID Off Serial ID Off Disp...
Page 42 - Weekly Command Timer
Options On Weekly Command Timer Onscreen display 1/3 Weekly Command Timer Program1 Monday On Function Program3 Tuesday --- Wednesday Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit y Program3 Thursday --- Friday Program6 Saturday Program4 Sunday Program Edit Weekly Comman...
Page 43 - Shipping condition
Weekly Command Timer 02 10:30 Command No Time IMS:SL1 Command 1 Program Weekly Command Timer Command 02 Command No IMS:SL1 10:30 Time 1 Program 1/2 SIGNAL PC OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OFF OSD LANGUAGE ENGLISH (US) COMPONENT/RGB-IN SELECT RGB INPUT LABELPOWER SAVE SET U...
Page 44 - Troubleshooting
44 Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Checks Picture Sound Interference Noisy Sound Electrical AppliancesCars / MotorcyclesFluorescent light Normal Picture No Sound Volume(Check whether the mute function has been ...
Page 45 - List of Aspect Modes
45 List of Aspect Modes Aspect mode Picture Enlarged screen Description All Aspect: On Factory settingAll Aspect: Off 16:9 FULL The display of the pictures fi lls the screen.In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. This mode is suited to d...
Page 47 - Command list of Weekly Command Timer
47 Command list of Weekly Command Timer No. Command Control details 1 AAC:MENCLR Audio Menu (Clear) 2 AAC:MENDYN Audio Menu (Dynamic) 3 AAC:MENSTD Audio Menu (Standard) 4 AAC:SURMON Surround (ON) 5 AAC:SUROFF Surround (OFF) 6 AMT:0 Audio Mute (OFF) 7 AMT:1 Audio Mute (ON) 8 ASO:M Audio out when PIP ...
Page 48 - Specifi cations
48 TH-42PH11UK TH-50PH11UK Power Source 110 - 127 V AC, 50/60 Hz Power Consumption Power on 365 W 455 W Stand-by condition Save OFF 1.5 W, Save ON 0.6 W Save OFF 1.4 W, Save ON 0.6 W Power off condition 0.2 W 0.1 W Plasma Display panel Drive method : AC type 42-inch, 16:9 aspect ratio Drive method :...
Page 49 - LIMITS AND EXCLUSIONS; In the USA
Panasonic Professional Display CompanyUnit of Panasonic Corporation of North AmericaOne Panasonic Way 1F-10Secaucus, NJ 07094 Panasonic Puerto Rico, Inc. Ave. 65de Infanteria, Km.9.5San Gabriel Industrial ParkCarolina, Puerto Rico 00985 Panasonic Professional Flat Panel Display Limited Warranty Pana...
Page 50 - LIMITED WARRANTY STATEMENT
Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 LIMITED WARRANTY STATEMENT Item Video Tape P2/SD Cards Video Heads D5 Video heads Maintenance Items Colour Camera CCDImaging Block BT-H Series LCD Monitors * DLP™ Projectors * LCD Projectors above 2,500 ANSI Lumens * LCD Projector...
Page 52 - Not