Page 2 - Caution for AC Mains Lead; or the BSI mark; Before use; Remove the connector cover.; How to replace the fuse; Open the fuse cover with a screwdriver.; Safety precautions; Unit; Figure A; WARNING
2 RQT9756 Caution for AC Mains Lead (For the AC mains plug of three pins) For your safety, please read the following text carefully.This appliance is supplied with a moulded three pin mains plug for your safety and convenience.A 5-ampere fuse is fitted in this plug.Should the fuse need to be replace...
Page 3 - About descriptions in these operating instructions; Wall mounting accessories
3 RQT9756 Placement ≥ Place this unit on an even surface. ≥ To reduce the risk of fire, electric shock or product damage,– Do not install or place this unit in a bookcase, built-in cabinet or in another confined space. Ensure this unit is well ventilated. – Do not obstruct this unit’s ventilation op...
Page 4 - Control reference guide; Top view; Before using for the first time
4 RQT9756 Control reference guide 1 Standby/on switch ( Í /I ) ( Í ) Press to switch the unit from on to standby mode or vice versa.In standby mode, the unit is still consuming a small amount of power. 2 Select the audio source 3 Basic playback control buttons 4 Enter setup menu 5 Enter the iPod/iPh...
Page 5 - Clean this unit with a soft, dry cloth; DO
5 RQT9756 Connections ≥ These speakers do not have magnetic shielding. Do not place them near a television, personal computer or other devices easily influenced by magnetism. ≥ Tape the DAB/FM antenna to a wall or column in a position with the least amount of interference. (Use a DAB/FM outdoor ante...
Page 6 - Inserting media; Select “IPOD_DOCK” as the source; Select “IPOD_PORT” as the source
6 RQT9756 Inserting media *1: Refer to “Playable media” for compatible models. ( l 24) *2: When using the “IPOD_PORT” connection, do not connect the following models to this unit:– iPod classic, iPod [4th (colour display), and 5th (video) generation], iPod nano (1st generation)Unexpected behaviour m...
Page 7 - Network settings; “Method 1”; Method 1
7 RQT9756 Network settings With this feature you can wirelessly stream music from an iOS device (iPhone, iPod, iPad) or a Mac/PC to this unit’s speakers.To use this feature (AirPlay), this unit must join the same 2.4 GHz wireless network as the AirPlay compatible device ( l 24). ≥ It is also possibl...
Page 8 - Method 2; Method 3
8 RQT9756 ∫ Using the WPS Push Button Configuration (PBC) 1 Disconnect any devices connected to this unit. 2 Press and hold [– NETWORK SETUP] on the unit. ≥ Complete step 3 within 2 mins. 3 After “WPS” is indicated, press the WPS button on the wireless network router. 4 The unit’s settings are compl...
Page 9 - Advanced network settings
9 RQT9756 4 Select “ Search wireless network ”. 5 Select and input the details. ≥ Check your home wireless network name (Network name (SSID)) and password for this network. This can often be found on the wireless network router itself. 6 Select “ JOIN ” to apply the settings. ≥ In the pop-up screen,...
Page 11 - Note about changing the password; Directly streaming to this unit; Display the password
11 RQT9756 With this function set to “ON”, you can stream music from the iOS device or Mac / PC (iTunes 10.2.2 or later) to this unit without the need of a wireless network router. ≥ Previous network settings will be deleted when this function is set to “ON”. ≥ The following explanations are based o...
Page 12 - Preparation
12 RQT9756 Bluetooth ® operations By using the Bluetooth ® connection, you can listen to the sound from the Bluetooth ® audio device from this unit wirelessly. Preparation ≥ Turn on the Bluetooth ® feature of the device and place the device near this unit. ≥ If this unit is already connected to a Bl...
Page 13 - Media playback operations; To display
13 RQT9756 Media playback operations The following marks indicate the availability of the feature. Preparation ≥ Turn the unit on. ≥ Insert the media ( l 6) or connect the Bluetooth ® ( l 12) / AirPlay ( l 10) compatible device. ≥ Press [CD], [iPod/USB] or [ ] to select the audio source. ≥ When usin...
Page 14 - Memorising stations
14 RQT9756 Select the playback mode. 1 Press [PLAY MENU] to select “REPEAT”, “RANDOM” / “SHUFFLE” or “PLAYMODE”. 2 Press [ 3 , 4 ] to select the setting and then press [OK]. ≥ When using an iPod/iPhone/iPad or Bluetooth ® device, use the setting on the device, if available. ≥ During random/shuffle p...
Page 15 - Manually tuning 1 frequency block; Listening to the secondary service
15 RQT9756 You can preset up to 20 DAB/DAB+ stations. Preparation ≥ Press [RADIO] repeatedly to select “DAB/DAB+”. 1 While listening to a DAB broadcastPress [OK]. 2 Press [ 3 , 4 ] to select the desired preset channel number and then press [OK]. ≥ You cannot preset stations when the station is not b...
Page 16 - Listening to FM radio; Presetting stations automatically
16 RQT9756 ≥ If broadcasting stations are memorised, proceed to “To re-scan DAB/DAB+ stations” to memorise stations on other frequency blocks. ( l 14) ≥ If “SCAN FAILED” is still displayed, repeat steps 1 to 3 until a station is memorised. If the situation does not improve, try using an outdoor DAB ...
Page 17 - Manual tuning and presetting; To improve FM sound quality; To display the current FM signal status
17 RQT9756 ∫ Manual tuning and presetting Select a radio broadcast. 1 Press [PLAY MENU] repeatedly to select “TUNEMODE”. 2 Press [ 3 , 4 ] to select “MANUAL” and then press [OK]. 3 Press [ : / 6 ] or [ 5 / 9 ] to tune to the required station. ≥ To start automatic tuning, press and hold [ : / 6 ], [ ...
Page 18 - Sound adjustment; Clock and Timer; Setting the timer; Turn the timer on; Setting the clock; Sleep timer
18 RQT9756 Sound adjustment The following sound effects can be added to the audio output. 1 Press [SOUND] repeatedly to select the effect. 2 Press [ 3 , 4 ] to select the setting and then press [OK]. ≥ You may experience a reduction in sound quality when these effects are used with some sources. If ...
Page 19 - Others; To cancel this function; Checking the software version
19 RQT9756 Others As a factory preset, this unit will always turn off automatically if there is no sound output and no operation for approx. 30 minutes. To cancel this function 1 Press [SETUP] repeatedly to select “AUTO OFF”. 2 Press [ 3 , 4 ] to select “OFF” and then press [OK]. ≥ To turn automatic...
Page 20 - Wi-Fi signal strength
20 RQT9756 To check the Wi-Fi signal strength where the unit is located. Preparation Connect this unit to the wireless network. ( l 7) 1 Press [SETUP] repeatedly to select “SIG.LEVEL” and then press [OK]. ≥ The unit’s display shows “LEVEL ”. (“ ” stands for a number.) 2 Press [OK] to exit this d...
Page 21 - Troubleshooting; Common problems
21 RQT9756 Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the solutions indicated in the following guide do not solve the problem, consult your dealer for instructions. Do you have the latest software installed? ≥ Occas...
Page 23 - Messages
23 RQT9756 The following messages or service numbers may appear on the unit’s display. “--:--” ≥ You plugged the AC mains lead in for the first time or there was a power failure recently. Set the time ( l 18). “ADJUST CLOCK” ≥ Clock is not set. Adjust the clock accordingly. “ADJUST TIMER” ≥ Play tim...
Page 25 - Creating MP3 files on a USB device; Licenses; Compatible CD
25 RQT9756 ≥ A disc with the CD Logo. ≥ This unit can play back discs that conform to the CD-DA format. ≥ The unit may not be able to play some discs due to the condition of the recording. ≥ This unit does not guarantee connection with all USB devices. ≥ FAT12, FAT16 and FAT32 file systems are suppo...
Page 26 - Specifications; III
26 RQT9756 Specifications ≥ Specifications are subject to change without notice.Mass and dimensions are approximate. ≥ Total harmonic distortion is measured by a digital spectrum analyzer. *1: When the iPod/iPhone/iPad is not charging and the dock is closed. *2: MPEG-1 Layer 3, MPEG-2 Layer 3 ∫ GENE...
Page 27 - Attaching the unit to a wall; Supplied accessories; The position to attach the wall mount brackets; Installation accessories
27 RQT9756 Attaching the unit to a wall (optional) This unit can be wall mounted using the supplied wall mount brackets, etc. Make sure that the screw used and the wall are strong enough to support the weight of at least 33 k g . The screws and other items are not supplied as the type and size will ...
Page 29 - Panasonic Warranty; SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES; Panasonic Australia Pty. Limited
29 RQT9756 Limited Warranty (ONLY FOR AUSTRALIA) Panasonic Warranty 1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its Authorised Service Centre will perform necessary service on the product without charge for parts or lab...
Page 31 - For business users in the European Union; Cd
31 RQT9756 [For]the]United]Kingdom[and[Ireland] Declaration of Conformity (DoC) Hereby, “ Panasonic Corporation ” declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Customers can download a copy of the original DoC to our ...
Page 32 - For the United Kingdom and Ireland customers; Sales and Support Information; Customer Communications Centre; EU
For the United Kingdom and Ireland customers Sales and Support Information Customer Communications Centre ≥ For customers within the UK: 0844 844 3899 ≥ For customers within Ireland: 01 289 8333 ≥ Monday–Friday 9:00 am - 5:00 pm(Excluding public holidays). ≥ For further support on your product, plea...
