Panasonic RP HTX80B - User Manual

Before use 7 Accessories Please check and identify the supplied accessories. Only for U.S.A.: To order accessories, refer to “Limited Warranty (ONLY FOR U.S.A.)” on “Basic Owner’s Manual”.Only for Canada: To order accessories, contact the dealer from whom you have made your purchase. Maintenance Cle...

Before use 8 Part names *1 Í /I: Standby/ON *2 Hereafter referred to as “LED”*3 Examples of lighting/blinking patterns *4 The battery is low when it is blinking in red. ( l 14, “Battery level notification”) Note • Do not use any other USB charging cords except the supplied one.• When using the unit,...

Preparation 9 Charging The rechargeable battery (installed in the unit) is not charged initially. Charge the battery before using the unit. Connect this unit to a computer using the USB charging cord. • The LED lights in red when charging is in progress. When charging is completed, the LED will go o...

Preparation 10 Connecting a Bluetooth ® device 1 In the power-off state, press and hold [ Í /I ( )] of this unit until the LED blinks. • The unit starts to search for the Bluetooth ® device for connection, and the LED will blink in blue and red alternately. 2 Turn on the power of the Bluetooth ® uni...

Preparation 11 1 Turn on this unit. • Press and hold [ Í /I ( )] of this unit for approx. 3 seconds until the LED (blue) blinks. • A beep will sound, and the LED (blue) will blink slowly. 2 Perform steps 2 and 3 of “Pairing (Registration) this unit with the Bluetooth ® device for connection”. ( l 10...

Operation 12 Listening to music If the Bluetooth ® compatible device supports the “A2DP” and “AVRCP” Bluetooth ® profiles, music can be played back with remote control operations on the unit. • A2DP (Advanced Audio Distribution Profile): Transmits audio to the unit.• AVRCP (Audio/Video Remote Contro...

Operation 13 Making a phone call With Bluetooth ® enabled phones (cell phones or smartphones) that support the “HSP” or “HFP” Bluetooth ® profile, you can use the unit for phone calls. • HSP (Headset Profile): This profile can be used to receive monaural sounds and establish two-way communication us...

Operation 14 Useful functions You can activate the voice control function of your Bluetooth ® device (smartphone, etc.) and control the device by speaking to the microphone of the unit. 1 Connect the Bluetooth ® device and the unit. ( l 10, “Connecting a Bluetooth ® device”) 2 Press and hold [ ] of ...

Other 15 Restoring to the factory settings When you want to delete all pairing device information, etc., you can restore the unit to the factory settings (original settings upon purchase). Charge the battery before restoring the unit. 1 While the unit is turned off, press and hold [ Í /I ( )] for at...

Other 16 Troubleshooting Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” on “Basic Owner’s Manual” if you reside in the U.S.A., or refe...

Other 17 Sound from the device is cut off. / Sound quality is bad. • Sound may be disrupted if signals are blocked. Do not fully cover this unit with the palm of your hand, etc.• The device may be out of the 10 m (33 feet) communication range. Move the device closer to this unit.• Remove any obstacl...

Other 18 Specifications ∫ General *1 It may be shorter depending on the operating conditions.*2 Time taken to recharge from empty to full. ∫ Bluetooth ® section ∫ Speaker section ∫ Terminal section ∫ Microphone section ∫ Accessory section • Specifications are subject to change without notice. Power ...

Other 19 To remove the battery when disposing of this unit • Disassemble after the battery runs out.• Keep disassembled parts out of reach of children. Regarding the handling of used batteries • Insulate the terminals with adhesive tape or similar material.• Do not disassemble. ∫ Batteries • Do not ...