Page 2 - Before Initial Use; For your future reference; Attach your purchase receipt here.
Before Initial Use 2 For your future reference Serial No. Date of purchase (found on the bottom of the unit) Name and address of dealer Please read IMPORTANT SAFETYINSTRUCTIONS on page 34 before use.Read and understand all instructions. Thank you for purchasing your new Panasonic integratedtelephone...
Page 3 - Accessories
3 For assistance, please call: 1-800-211-PANA(7262) Accessories (included) For extra orders, call 1-800-332-5368. ∑ Handset (p. 8)Order No. PQJXC0102Z one ∑ Telephone Line Cord (p. 8) one ∑ Handset Cord (p. 8)Order No. PQJA212M one ∑ Wall Mounting Adaptor (p. 14)Order No. PQKL10038Y1 one PQQX13160ZB...
Page 4 - Contents; Preparation
4 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 6 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 7 Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 8 Install...
Page 5 - Useful Information
5 Preparation Basic Operation Advanced Operation Useful Information For assistance, please call: 1-800-211-PANA(7262) Special Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 For Call Waiting Service Users . . . . . . . . . . . . . . . . . . . . . . . . . 23Tempor...
Page 6 - Location of Controls; VOLUME
6 Location of Controls A B C D E F JKL MNO GHI TUV WXYZ PQRS PAUSE REDIAL REDIAL FL ASH HOLD VOLUME VOLUME MUTE MUTE PROGRAM M IC S P- PHON E DIAL LOCK DIAL LOCK DIAL LOCK MUT UTE PR PROG. OG. LOWER TIME AUTO/ AUTO/ LOWER LOWER (TONE) Button (p. 23) (FLASH) Button (p. 23, 25) VOLUME (_) (^) Buttons ...
Page 7 - Display
For assistance, please call: 1-800-211-PANA(7262) Preparation 7 Display : In the standby mode, the display shows the current time. (Ex. 12:00AM) : During a conversation, the call duration is displayed. (Ex. 2 hours, 14 minutes, 30 seconds) : (FLASH) was pressed. : (PAUSE) was pressed while storing p...
Page 8 - Settings; Installing the Batteries
8 Settings Connecting the Handset/Telephone LineCord After connection, lift the handset to check for a dial tone. ≥ Use only a Panasonic Handset for the KX-TS108W. Single-Line Telephone Jack(RJ11C) Handset Cord Handset Telephone Line Cord LINE LINE DA DATA 1. Press down in the direction of the arrow...
Page 9 - Connecting a Communication Device
For assistance, please call: 1-800-211-PANA(7262) 9 Preparation “ ≥ Computer ≥ Modem ≥ Fax ≥ Answering machine Single-LineTelephone Jack(RJ11C) LINE DATA Connecting a Communication Device If you connect a communication device (computer, modem, fax,answering machine, etc.) to the telephone line, you ...
Page 10 - Programming Summary
10 “ Settings Programming Summary You can program the following functions. The display shows theprogramming instructions. See the corresponding pages for functiondetails. Make sure that a call is not put on hold. Press (MUTE) . Press (PROGRAM) to store the setting. Press (PROGRAM) . ≥ To set the cal...
Page 11 - Dialing Mode; Make sure that a call is not put on hold.
For assistance, please call: 1-800-211-PANA(7262) 11 Preparation “ Dialing Mode You can select the dialing mode by programming. If you have touch toneservice, set to “Tone”. If rotary or pulse service is used, set to “Pulse”.Your phone comes from the factory set to “Tone”. Make sure that a call is n...
Page 12 - Time Adjustment
12 Time Adjustment You can select AM/PM or military time by programming. Make sure that a call is not put on hold. 1 Press (PROGRAM) . 2 Press (MUTE) . 3 Press (6) . 4 Enter the current time (hour andminute) using a 4-digit number.(Ex. To set 9:30, enter “0930”.) 5 Press (#) to select AM, PM or mili...
Page 13 - LCD Contrast; Ringer Volume
For assistance, please call: 1-800-211-PANA(7262) 13 Preparation LCD Contrast You can select the LCD contrast level from 1 to 4 by programming. Yourphone comes from the factory set to 3. Make sure that a call is not put on hold. 1 Press (PROGRAM) . 2 Press (MUTE) . 3 Press (7) . ≥ The current settin...
Page 14 - Wall Mounting; so the tab holds the handset
“ Settings 14 To temporarily set the handsetdown during a conversation,place it as shown here. Wall Mounting The unit can be mounted on a wall phone plate. 1 Pull down the handset hook until itlocks, so the tab holds the handset . 2 Tuck the telephone line cord insidethe wall mounting adaptor, andpu...
Page 15 - Basic Operation; Using the speakerphone; To redial the last number dialed; Using the speakerphone:; Making Calls
For assistance, please call: 1-800-211-PANA(7262) 15 Basic Operation Using the speakerphone 1 Press (SP-PHONE/HEADSET) . ≥ The indicator lights. 2 Dial a phone number. ≥ The dialed number is displayed. ≥ After a few seconds, the display will show the length of the call. ≥ If you misdial, press (SP-P...
Page 16 - During speakerphone operation; To put a call on hold; To release the hold
16 “ Making Calls During speakerphone operation For best performance, please note the following: ≥ Talk alternately with the other party in a quiet room. ≥ If the other party has difficulty hearing you, press VOLUME (_) to decrease the speaker volume. ≥ You can switch to the handset by lifting it up...
Page 17 - Answering Calls
For assistance, please call: 1-800-211-PANA(7262) Answering Calls 17 Basic Operation While a call is being received, the unit rings and the ringer indicatorflashes. You can answer it by simply lifting the handset. Using the speakerphone 1 Press (SP-PHONE/HEADSET) . ≥ The indicator lights. 2 Talk int...
Page 18 - Storing Phone Numbers; Speed Dialer
18 Storing Phone Numbers You can store up to 10 phone numbers in memory. The dialing buttons( (0) to (9) ) function as memory stations. Do not press any memory stations before storing to prevent misoperation. Make sure that a call is not put on hold. 1 Press (PROGRAM) . 2 Enter a phone number, up to...
Page 19 - Advanced Operation; To erase a stored number; Dialing a Stored Number
For assistance, please call: 1-800-211-PANA(7262) Advanced Operation 19 To erase a stored number 1 Press (PROGRAM) . 2 Press (AUTO/LOWER) . 3 Press a memory station number ( (0) to (9) ) for the phone number to be erased. ≥ A long beep sounds. ≥ The unit will return to the standby mode. Dialing a St...
Page 20 - To store in an UPPER memory location
20 Storing Phone Numbers You can store up to 20 phone numbers in the one-touch auto dial buttons(10 numbers in UPPER memory locations, 10 numbers in LOWERmemory locations). Make sure that a call is not put on hold. To store in an UPPER memory location It is recommended that you program an emergency ...
Page 21 - To store in a LOWER memory location
For assistance, please call: 1-800-211-PANA(7262) Advanced Operation 21 “ To store in a LOWER memory location 1 Press (PROGRAM) . 2 Enter a phone number, up to 22 digits. ≥ If you enter a wrong number, press (PROGRAM) and start again from step 1. 3 Press (AUTO/LOWER) . 4 Press one of the one-touch a...
Page 22 - From an UPPER memory location:; Memory card
22 Dialing a Stored Number From an UPPER memory location: 1 Lift the handset or press (SP-PHONE/HEADSET) . 2 Press the required one-touch auto dial button. ≥ The stored number is displayed and dialed. OR From a LOWER memory location: 1 Lift the handset or press (SP-PHONE/HEADSET) . 2 Press (AUTO/LOW...
Page 23 - Special Features; For Call Waiting Service Users; Temporary Tone Dialing
For assistance, please call: 1-800-211-PANA(7262) Advanced Operation 23 Special Features “ For Call Waiting Service Users Press (FLASH) if you hear a call-waiting tone while talking. ≥ The first call is put on hold and you can answer the second call. ≥ “ ” is displayed. ≥ To return to the first call...
Page 24 - Muting Your Conversation
24 “ Special Features How to Use the PAUSE Button (For Analog PBX Line/Long Distance Service Users) We recommend you press (PAUSE) if a pause is required for dialing with a PBX or to access a long distance service. Ex. Line access number (9) (PBX) (9) ¤ (PAUSE) ¤ ≥ Pressing (PAUSE) once creates a fe...
Page 25 - FLASH Button; Selecting the flash time
For assistance, please call: 1-800-211-PANA(7262) Advanced Operation 25 “ FLASH Button Pressing (FLASH) allows you to use special features of your host PBX such as transferring an extension call or accessing special telephoneservices (optional) such as call waiting. Selecting the flash time The flas...
Page 26 - PIN Code
26 “ Special Features PIN Code A 4-digit PIN Code (Personal Identification Number) preventsunauthorized persons from using your unit. The PIN Code is required forthe dial lock and call restriction to be set or canceled. The factory presetPIN code is “ 1111 ”. Make sure that a call is not put on hold...
Page 27 - To cancel the dial lock; To set the dial lock; Dial Lock
For assistance, please call: 1-800-211-PANA(7262) Advanced Operation 27 “ To cancel the dial lock Follow steps 1 through 3 above again. ≥ “ ” will disappear, and the unit will return to the standby mode. You can use the following features while the dialing buttons are locked. ≥ Dialing a number you ...
Page 28 - Call Restriction; To set the call restriction
28 “ Special Features When dialing a phone number with the restricted leading digit(s), the dialednumber will flash on the display, but not dialed out. Call Restriction You can prevent the unit from dialing phone numbers beginning withspecified digit(s) (1 digit or 2 digits). Phone numbers with the ...
Page 29 - To cancel the call restriction; Optional Headset; Connecting an Optional Headset to the Unit
For assistance, please call: 1-800-211-PANA(7262) 29 To cancel the call restriction Follow steps 1 through 5 on page 28. In step 6, press ($) to cancel call restriction (“– –” is displayed) and press (PROGRAM) . ≥ A long beep will sound and the unit will return to the standby mode. Optional Headset ...
Page 30 - Making/Answering Calls; Make sure to install the batteries.
“ Optional Headset 30 Making/Answering Calls Make sure to install the batteries. 1 Press (SP-PHONE/HEADSET) to make or answer a call. ≥ The SP-PHONE/HEADSET indicator flashes. ≥ If you misdial when making a call, press (SP-PHONE/HEADSET) twice and dial again. 2 To hang up, press (SP-PHONE/HEADSET) ....
Page 31 - Battery Replacement
For assistance, please call: 1-800-211-PANA(7262) Battery Replacement 31 If “ ” flashes, the battery power is low. Install new batteries. Replace the batteries within 1 minute to keep the programmed settings. But theprogrammed time setting will be cleared. 1 Disconnect the telephone line cordfrom th...
Page 32 - Troubleshooting; Problem; Remedy
32 Troubleshooting Problem The unit does not work. The unit does not ring. You cannot dial. The other party suddenlycannot hear your voiceduring a conversation. You cannot program itemssuch as the dialing mode. You cannot store a phonenumber in memory. While programming, theunit starts to ring and s...
Page 34 - Important Safety Instructions; SAVE THESE INSTRUCTIONS
34 Important Safety Instructions When using this unit, basic safety precautions should always be followedto reduce the risk of fire, electric shock, or personal injury. 1 1. Read and understand all instructions. 1 2. Follow all warnings and instructions marked on this unit. 1 3. Unplug this unit fro...
Page 36 - FCC and Other Information
FCC and Other Information 36 If requested by the telephone company, inform them as follows:FCC Registration No. . . . . . . . . . . . . . . . . . . . . .(found on the bottom of the unit)Ringer Equivalence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.0BThe ...
Page 38 - Index
Index 38 A Accessories . . . . . . . . . . . . . . . . 3Answering calls. . . . . . . . . . . . . 17 B Battery, Installing . . . . . . . . . . . . 8Battery life . . . . . . . . . . . . . . . . . 8Battery replacement . . . . . . . . . 31 C Call on hold . . . . . . . . . . . . . . . 16Call Restriction ...
