Panasonic KX TGD563M - User Manual
Panasonic KX TGD563M – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Operating tips; Using the navigator key
- Page 4 – Frequently asked questions
- Page 5 – Quick troubleshooting
- Page 6 – No dial tone is heard from handset.
- Page 7 – Registering a handset to base unit
- Page 8 – Read this; Quick Guide; or; Operating; FAQs and troubleshooting hints are available.; Contact us via the web at:
PQQW15083ZA
DM1205SY0
Setting up
For further information, visit
http://www.panasonic.com/phonehelp
Hook
OR
Base unit
CHARGE 7 HOURS
Handset
Noise filter (For DSL Service users)
(120 V AC, 60 Hz)
To single-line
telephone jack
(RJ11C)
“Click”
B
A
Charger
Press plug
firmly.
“Click”
(120 V AC, 60 Hz)
Charging
5
Use only the included Panasonic AC adaptor
PQLV1 or PQLV256.
Confirm
“
Charging
” is
displayed.
KX-TG5672/KX-TG5673
Confirm CHARGE
indicator is on.
Model No.
KX-TG5671
KX-TG5672
KX-TG5673
Quick Guide
TG567x_QG(e).fm Page 1 Tuesday, December 20, 2005 3:37 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
– 2 – Operating tips { } : shows button names. Using the navigator key After pressing { MENU } or { Phonebook } , the handset navigator key can be used. Press {^} , {V} , { < } , or { > } to navigate through menus and to select items shown on the display. Adjusting audio volume Press {^} or {V...
– 4 – Continued Answering system (Base unit) Feature Operation Listening to new messages When the MESSAGE indicator flashes on the base unit, press { MESSAGE } . Listening to old messages When the MESSAGE indicator does not flash on the base unit, press { MESSAGE } . Erasing a message Press { ERASE ...
– 5 – Quick troubleshooting Place the handset on the base unit, then check if CHARGE indicator is on. CHARGE indicator is OFF. CHARGE indicator is ON. Unplug and then plug AC adaptor properly to both the base unit and AC outlet. Unplug the AC adaptor of the base unit and remove the battery from the ...
