Panasonic KX-TG7745 - Manual

No. Accessory item/Order number Quantity I AC adaptor for range extender/PQLV219Y 1 AI B C D E F G H Additional/replacement accessories Please contact your nearest Panasonic dealer for sales information (page 82). Accessory item Order number Rechargeablebatteries HHR-4DPA *1 R To order, please call ...

Bluetooth ® devices You can expand your phone system by registering the following units to a single base unit. Your Bluetooth cellular phone *1 : 2 max. (for cellular calls: page 18) Your Bluetooth headset *1 : 1 max. (for a wireless hands-free conversation: page 47) *1 Your cellular phone and heads...

For your safety To prevent severe injury and loss of life/property, read this section carefully beforeusing the product to ensure proper and safeoperation of your product. WARNING Power connection R Use only the power source marked on theproduct. R Do not overload power outlets andextension cords. T...

– the handset batteries need recharging or have failed. – there is a power failure. Battery R We recommend using the batteries notedon page 5. USE ONLY rechargeable Ni-MH batteries AAA (R03) size. R Do not mix old and new batteries. R Do not open or mutilate the batteries.Released electrolyte from t...

R If the reception for a base unit location isnot satisfactory, move the base unit toanother location for better reception. Environment R Keep the product away from electrical noisegenerating devices, such as fluorescentlamps and motors. R The product should be kept free fromexcessive smoke, dust, h...

Specifications R Standard: DECT 6.0 (Digital Enhanced CordlessTelecommunications 6.0)Bluetooth wireless technology 2.0 R Frequency range: 1.92 GHz to 1.93 GHz (DECT)2.402 GHz to 2.48 GHz (Bluetooth) R RF transmission power: 115 mW (max.) R Power source: 120 V AC, 60 Hz R Power consumption:Base unit:...

Setting up Connections R Use only the supplied Panasonic ACadaptor PNLV226. R If you do not connect the telephone linecord and use only cellular lines, set thecellular line only mode to use this unit moreconveniently (page 20). n Base unit Correct Incorrect To power outlet Press plug firmly. Hook “C...

Battery charging Charge for about 7 hours. R When the batteries are fully charged, “ Fully charged ” is displayed. Confirm “ Charging ” is displayed. Note when setting up Note for connections R The AC adaptor must remain connected atall times. (It is normal for the adaptor to feelwarm during use.) R...

Intelligent eco mode This feature automatically reduces handsetpower consumption by suppressing handsettransmission power when the handset is closeto the base unit. R When this feature is activated, is displayed. However, during a cellular call, is not displayed even though this feature is activated...

n KX-TG7741 series (page 3) JK A B C E F D G HI L P O M Q N R Charge contactsSpeaker M HOLD N M CONF N (Conference) M REDIAL N M PAUSE N M FLASH N M CALL WAIT N M SP-PHONE N (Speakerphone) SP-PHONE indicator M ERASE N M MUTE N M ANSWER ON/OFF N ANSWER ON/OFF indicator M LOCATOR N M INTERCOM N M n N ...

Dial keypad ( * : TONE) ReceiverDisplay M CALL WAIT N M FLASH N M OFF N MicrophoneCharge contacts n Control type Soft keys The handset features 3 soft keys. Bypressing a soft key, you can select thefeature shown directly above it on thedisplay. Navigator key – MDN , MCN , MFN , or MEN : Scroll throu...

Item Meaning Blocked call (page 41) Clarity booster is on. *2 (page 24) In use Answering system is beingused by another handset orthe base unit. Cell1 inuse Someone is using the cellularline. Cell2 inuseLine inuse Someone is using the landline. *1 Corresponding cellular line(s) is indicated next to ...

Initial settings n Direct command code: Programmable settings can be accessed bypressing M MENU N , # and then the corresponding code on the dial keypad(page 33). Example: Press M MENU N#101 . n Symbol meaning: Symbol Meaning Example: MbN : “ Off ” Press MCN or MDN to select the words in quotations....

Link to cell feature To use this feature, you must first register andconnect your cellular phones to the base unit(page 18).Your cellular phones must have Bluetoothwireless technology that is compatible with thisproduct.This feature allows you to:– make or answer cellular calls using your home phone...

Link to cell settings Selecting which unit receivescellular calls You can select which unit rings and receivescalls for a cellular line. When “ All ” is selected, all handsets and the base unit ring. 1 M MENU N 2 For CELL 1: #6271 For CELL 2: #6272 3 MbN : Select the desired handset or “ All ” . 4 M...

Important: R When you are using a cellular line or aBluetooth headset, the base unit loses itsconnection from other Bluetooth devices(cellular phone or headset). Toautomatically resume the connection tocellular phones, leave the auto connectionon. R Some cellular phones lose connection afterusage, p...

The following settings are available:– “ Manual ” (handset only: default): You can select the desired cellular line when makinga call. – “Cellular phone 1” (base unit default): CELL 1 is selected. – “Cellular phone 2”: CELL 2 is selected. 1 M MENU N 2 For handset: #634 For base unit *1 : #*634 3 MbN...

Making cellular calls Important: R Only 1 cellular line can be used at a time. R Before making calls, confirm that the CELL1 or CELL 2 indicator lights green (page 16). 1 Lift the handset and dial the phonenumber. R To correct a digit, press M CLEAR N . 2 M CELL N R The unit starts dialing when:– on...

and/or PIN in the phonebook, a pause is alsoneeded (page 32). Example: If you need to dial the line access number “9” when making outside calls with aPBX: 1 9 a M PAUSE N 2 Dial the phone number. a M N Note: R A 3.5 second pause is inserted each time M PAUSE N is pressed. Answering calls When a call...

Mute While mute is turned on, you can hear theother party, but the other party cannot hearyou. 1 Press M MUTE N during conversation. R M MUTE N flashes. 2 To return to the conversation, press M MUTE N again. Note: R M MUTE N is a soft key visible on the handset display during a call. Flash for landl...

3 To make a 2nd call: Dial the phone number. a M N To answer a 2nd call: M N R To hold the 2nd call: M MENU N a MbN : “ Hold ” a M SELECT N 4 To hang up the 2nd call and return to the1st call (cellular call), press M OFF N , then press M CELL N . 26 For assistance, please visit http://www.panasonic....

Making cellular calls Available for: KX-TG7741 series (page 3) 1 Press M CELL 1 N or M CELL 2 N . 2 Dial the phone number. 3 When the other party answers, speak intothe microphone. R Speak alternately with the other party. 4 When you finish talking, press M SP-PHONE N . Note: R For best performance,...

Adjusting the base unit ringer volume n While the base unit is ringing for anincoming call: Press MjN or MkN repeatedly to select the desired volume. R To turn the ringer off, press and hold MkN until the unit beeps. n Programming the volume beforehand: 1 To change the cellular line ringervolume: Fo...

Shared phonebook The shared phonebook allows you to makecalls without having to dial manually. Anyhandset registered to the base unit can usethe shared phonebook. You can add 3,050names and phone numbers to the sharedphonebook, and assign each phonebook entryto the desired group ( “ Home ” , “ Cell ...

Finding and calling from aphonebook entry Scrolling through all entries n Using a cellular line 1 M N 2 MbN : Select the desired entry. 3 M CELL N R The unit starts dialing when:– only 1 cellular phone is registered.– a specific line is set to make cellular calls (page 20). 4 MbN : Select the desire...

2 MbN : “ Yes ” a M SELECT N 3 M OFF N Erasing all entries in a group 1 M N a M MENU N 2 MbN : “ Erase all ” a M SELECT N 3 MbN : Select the desired group. a M SELECT N 4 MbN : “ Yes ” a M SELECT N 5 MbN : “ Yes ” a M SELECT N 6 M OFF N Chain dial This feature allows you to dial phone numbersin the ...

Programmable settings You can customize the unit by programming the following features using the handset.To access the features, there are 2 methods: n Scrolling through the display menus 1 M MENU N 2 Press MCN or MDN to select the desired main menu. a M SELECT N 3 Press MCN or MDN to select the des...

Special programming Alarm An alarm sounds at the set time for 3 minutesonce or daily. Alarm can be set for eachhandset. Important: R Set the date and time beforehand(page 17). 1 M MENU N#720 2 MbN : Select the desired alarm option. a M SELECT N Off Turns alarm off. Go to step 7. Once An alarm sounds...

2 Enter the desired name (max. 10characters; see the character table,page 30). R If not required, go to step 3. 3 M SAVE N 4 MbN : Select the desired setting. a M SELECT N 2 times 5 M OFF N Call block (Caller ID subscribersonly) This feature allows the unit to reject calls when:– the unit receives a...

To turn the feature off: M ERASE N a MCN a M SAVE N a M OFF N Registering a unit Operating additional units Additional handsets Up to 6 handsets can be registered to thebase unit. Important: R See page 5 for information on the availablemodel. Registering a handset to thebase unit The supplied handse...

Using Caller ID service Important: R This unit is Caller ID compatible. To useCaller ID features, you must subscribe to aCaller ID service. Contact your serviceprovider/telephone company for details. Caller ID features When an outside call is being received, thecaller’s name and phone number aredisp...

Ringer ID You can select the desired ringer tone to agroup that each phonebook entry is assigned(page 30). When a call is received from acaller assigned to a group, the ringer tone youselected for that group rings instead of thecalled line’s ringer tone (page 19, 35, 37) aftercaller information is d...

Copying phonebook from a cellular phone (phonebook transfer) You can copy phonebook entries from theregistered cellular phones or other cellularphones (not registered) to the unit’s sharedphonebook. A cellular phone must beBluetooth wireless technology compatible. Important: R If a copied entry has ...

Using a Bluetooth wireless headset (optional) for landline calls By registering a Bluetooth headset to the baseunit, you can have a hands-free conversationwirelessly for landline calls. Important: R 1 headset can be registered to the baseunit. However, only one Bluetooth device(cellular phone or hea...

Answering system for landline The answering system can answer and recordcalls for you when you are unavailable toanswer the phone.You can also set the unit to play a greetingmessage but not to record caller messages byselecting “ Greeting only ” as the recording time setting (page 53). Important: R ...

Greeting message When the unit answers a call, a greetingmessage is played to callers.You can use either:– your own greeting message– a pre-recorded greeting message Recording your greeting message1 M MENU N#302 2 MbN : “ Yes ” a M SELECT N 3 After a beep sounds, hold the handsetabout 20 cm (8 inche...

– The message indicator on the handset flashes slowly if the message alert featureis turned on (page 53). 1 To listen to new messages: M MENU N#323 To listen to all messages: M MENU N#324 2 When finished, press M OFF N . Note: R To switch to the receiver, press M N . Operating the answering system M...

Important: R To prevent unauthorized access to thisproduct, we recommend that you regularlychange the remote code. 1 M MENU N#306 2 Enter the desired 3-digit remote accesscode. 3 M SAVE N a M OFF N Deactivating remote operation Press * in step 2 on “Remote access code”, page 51. R The entered remote...

Answering system settings Number of rings before the unitanswers a call You can change the number of times thephone rings “ Ring count ” before the unit answers calls. You can select 2 to 7 rings, or “ Toll saver ” . The default setting is “ 4 rings ” . “ Toll saver ” : The unit’s answering system a...

Voice mail service for landline Voice mail is an automatic answering serviceoffered by your service provider/telephonecompany. After you subscribe to this service,your service provider/telephone company’svoice mail system answers calls for you whenyou are unavailable to answer the phone orwhen your ...

Listening to voice mail messages The unit lets you know that you have newvoice mail messages in the following ways:– “ New Voice Mail ” is displayed on the handset if message indication service isavailable. – The message indicator on the handset flashes slowly if the message alert featureis turned o...

Intercom Intercom calls can be made:– between handsets– between a handset and the base unit *1 *1 KX-TG7741 series: page 3 Note: R When paging unit(s), the paged unit(s)beeps for 1 minute. R If you receive an outside call while talkingon the intercom, you hear 2 tones.– To answer the call with the h...

Transferring calls, conference calls Outside calls can be transferred or aconference call with an outside party can bemade:– between 2 handsets– between a handset and the base unit *1 *1 KX-TG7741 series: page 3 Handset 1 During an outside call, press M INT N to put the call on hold. 2 MbN : Select ...

Wall mounting Note: R Make sure that the wall and the fixingmethod are strong enough to support theweight of the unit. Base unit1 Thread the AC adaptor cord andtelephone line cord through the hole inthe wall mounting adaptor in the directionof the arrow. 2 Tuck the telephone line cord inside thewall...

5 Mount the unit on a wall then slide downto secure in place. AC adaptor cord 83 mm (3 1 / 4 inches) or102 mm (4 inches) 1 2 Wall phone plate 83 mm (3 1 / 4 inches) 102 mm (4 inches) 2 1 To remove the wall mounting adaptor While pushing down the release levers ( A ), remove the adaptor ( B ). A A B ...

Error messages Display message Cause/solution Base no power or No link. Re-connect baseAC adaptor. R The handset has lost communication with the baseunit. Move closer to the base unit and try again. R Unplug the base unit’s AC adaptor to reset the unit.Reconnect the adaptor and try again. R The hand...

Display message Cause/solution Use rechargeable battery. R A wrong type of battery such as Alkaline orManganese was inserted. Use only the rechargeableNi-MH batteries noted on page 5, 8. Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the b...

Problem Cause/solution I cannot connect a cellular phoneto the base unit. R Confirm that your cellular phone is turned on. R Confirm that your cellular phone is within base unitrange (page 15). R Depending on the state of the wireless environment,such as the presence of any electrical interference,t...

Problem Cause/solution I can make and answer cellularcalls but cannot hear a sound. R The Bluetooth technology on your cellular phone may notbe functioning normally. Turn off and on your cellularphone. R Disconnect and reconnect the base unit AC adaptor andtry again. I cannot switch cellular callsfr...

Problem Cause/solution Caller information is notannounced. R The handset or base unit’s ringer volume is turned off.Adjust it (page 23, 28, 35, 37). R When one handset is selected to ring for cellular calls,other units do not announce caller information. To changethe selection, see page 19. R The Ta...

Using Bluetooth devices Problem Cause/solution I cannot copy phonebookentries from a cellular phone. R Confirm that the cellular phone supports Bluetoothwireless technology. R Confirm that the cellular phone supports the Phone BookAccess Profile (PBAP) or Object Push Profile (OPP)specification. R If...

Answering system Problem Cause/solution The unit does not record newmessages. R The answering system is turned off. Turn it on (page 49). R The answering system does not answer or record callsfrom cellular lines. R The message memory is full. Erase unnecessarymessages (page 50). R The recording time...

Liquid damage Problem Cause/solution Liquid or other form of moisturehas entered the handset/baseunit. R Disconnect the AC adaptor and telephone line cord fromthe base unit. Remove the batteries from the handset andleave to dry for at least 3 days. After the handset/baseunit are completely dry, reco...

FCC and other information This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US:ACJ----------.If requested, this number must be provided ...

Guía Rápida Española Instalación CARGUE APROXIMADAMENTE DURANTE 7 HORAS Auricular Cargador Unidad base L UTILICE SOLO baterías de Ni-MH tamaño AAA (R03). L NO utilice baterías Alcalinas, de Manganeso o de Ni-Cd. L Compruebe que las polaridades son las correctas ( S , T ). L Use solo el adaptador de ...

Enlace a celular Puede usar la unidad para hacer o contestar llamadas usando una línea de teléfono celular. Sus teléfonos celulares deben tener tecnología inalámbrica Bluetooth ® compatible con este producto. Para obtener más detalles, visite nuestro sitio web: http://www.panasonic.com/link2cell L C...

Modo exclusivo para la línea celular (si no utiliza la línea terrestre) Si no utiliza la línea terrestre, configure el modo exclusivo para la línea celular para usar esta unidad en forma más conveniente. 1 { MENU } ( 157 2 Para encenderlo: { r } : “ Encendido ” s { SELEC. } s { r } : “ Sí ” s { SELE...

Cómo usar dispositivos Bluetooth Copiado de entradas del directorio telefónico desde un teléfono celular con Bluetooth (transferencia del directorio telefónico) Puede copiar entradas del directorio telefónico desde los teléfonos celulares registrados o desde otros teléfonos celulares (no registrados...

Cómo usar un audífono Bluetooth (opcional) para llamadas por la línea terrestre Al registrar un audífono Bluetooth en la unidad base, podrá tener conversaciones inalámbricas a manos libres para llamadas por la línea terrestre. L La conexión del audífono con Bluetooth no está disponible mientras algu...

Preguntas frecuentes Pregunta Causa y solución ¿Por qué aparece _ ? L El auricular está demasiado lejos de la unidad base. Acérquelo. L El adaptador para corriente de la unidad base no está conectado correctamente. Conecte de nuevo el adaptador para corriente a la unidad base. L El auricular no está...

Customer services Customer Services Directory (United States and Puerto Rico) Obtain Product Information and Operating Assistance; locate your nearest Dealer or Service Center; purchase Parts and Accessories; or make Customer Service and Literature requests by visiting our Web Site at: http://www.pa...

Warranty (For United States and Puerto Rico) PANASONIC CORPORATION OF NORTH AMERICA One Panasonic Way, Secaucus, New Jersey 07094 Limited Warranty Coverage If your product does not work properly because of a defect in materials or workmanship, Panasonic Corporation of North America (referred to as “...

Limited Warranty Limits And Exclusions This Limited Warranty ONLY COVERS failures due to defects in materials or workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage. The Limited Warranty ALSO DOES NOT COVER damages which occurred in shipment, or failures which are caused by produ...

Index # 3-way conference: 25 , 29 A Additional handset: 42 Alarm: 40 Answering calls: 23 , 27 Answering system Call screening: 49 Erasing messages: 50 , 51 , 52 Greeting message: 50 Greeting only: 53 Listening to messages: 50 , 52 Number of rings: 53 Recording time: 53 Remote access code: 51 Remote ...

1 Reconnect AC adaptor to the base unit. 2 Check if telephone line cord is connected. 3 Use rechargeable Ni-MH batteries. (Alkaline/Manganese/Ni-Cd batteries CANNOT be used.) 4 Read troubleshooting page in the Operating Instructions . If your product is not working properly. . . IMPORTANT! Visit our...