Page 2 - Thank you for purchasing a Panasonic product.; As an ENERGY STAR
Thank you for purchasing a Panasonic product. You can select the Czech, Hungarian, Slovak orEnglish language (KX-MB2000HX/KX-MB2010HX/KX-MB2025EX/KX-MB2030EX only). The display and reports will be in the selected language.If you want to change the setting, see feature #110 onpage 58. Designed to be ...
Page 3 - Important Information
For your safety Laser radiation CLASS 1 LASER PRODUCT The printer of this unit utilises a laser. Useof controls or adjustments or performanceof procedures other than those specifiedherein may result in hazardous radiationexposure. Laser diode properties Laser output : Max. 15 mWWavelength : 760 nm –...
Page 4 - The unit should not be exposed to direct sunlight.; Routine care; Moving the unit; When moving the unit, hold by the grips (; Illegal copies; consent of the owner
printing. Leave the power turned ON for a minimumof 30 minutes after printing. Location R To avoid malfunction, do not position the unit nearappliances such as TVs or speakers which generatean intense magnetic field. Static electricity R To prevent static electricity damage to the interfaceconnector...
Page 5 - Introduction and Installation; Configuring the unit to access the LAN; Programmable Features; Table of Contents
1. Introduction and Installation Accessories 1.1 Supplied accessories .................................... 7 1.2 Accessory information ................................... 7 Finding the Controls 1.3 Button descriptions ........................................ 8 1.4 Overview .............................
Page 6 - Cleaning the document feeder rollers; General Information; Information of copyrights and licences
Telephone 9.4 Handset unit (KX-MB2025/KX-MB2030only) ............................................................ 77 9.5 Making a phone call using one-touch dialfeature or phonebook (KX-MB2025/KX-MB2030 only) ........................................ 78 10. Help Reports and Displays 10.1 Report messa...
Page 7 - Replacement accessory
1.1 Supplied accessories A Toner cartridge(starter) *1 B Drum cartridge C CD-ROM D Operatinginstructions(English only) E Important information guide(English only) (Czech, Hungarianand Slovak only) *2 F Quick installationguide G Output tray H Power cord I Telephone linecord *3 J Handset *3 K Handset ...
Page 8 - Button descriptions; ABCDEF GH IJ K
1.3 Button descriptions ABCDEF GH IJ K M N Q R P O S T U V W L * The pictured model is KX-MB2025/KX-MB2030. Station keys (KX-MB2025/KX-MB2030 only) R To use the one-touch dial feature (page 43,44). M Manual Broad N (KX-MB2025/KX-MB2030 only) R To send a document to multiple parties by usingthe dial ...
Page 10 - Do not add toner to the toner cartridge.
1.5 Toner cartridge and drumcartridge The supplied toner cartridge is a starter toner cartridge. Caution: R Read the following instructions before you begininstallation. After you have read them, open thedrum cartridge protective bag. The drumcartridge contains a photosensitive drum.Exposing it to l...
Page 12 - poor or; REPLACE DRUM; appears on the display,; Panasonic toner and drum
8 Close the top cover by holding the indentations onboth sides of the unit, until locked. Caution: R To prevent injuries, be careful not to put yourhands under the top cover. When to replace the toner cartridge and the drumcartridge When the display shows the following, replace the tonercartridge.– ...
Page 14 - Note for recording paper:; – Extremely smooth or shiny paper, or paper that is; Push down to lock the plate (
1.7 Recording paper The paper input tray unit can hold:– Up to 250 sheets of 60 g/m 2 to 75 g/m 2 paper. – Up to 230 sheets of 80 g/m 2 paper. – Up to 200 sheets of 90 g/m 2 paper. R A4, letter, B5 and 16K-size paper can be used. B5and 16K-size paper can only be used when using theunit for printing ...
Page 15 - Caution for the paper input tray; Adjust the width of the guides (
match the paper size mark. Pinch the right side of therecording paper guide ( E ), then slide it to adjust the width to the size of the recording paper. R Make sure that the recording paper is under thepaper limit mark ( F ), and the paper should not be loaded over the snubbers ( G ). G D E F 5 Inse...
Page 17 - See page 77 to connect the handset unit.
2.1 Connections Caution: R When you operate this product, the power outletshould be near the product and easily accessible. R Be sure to use the telephone line cord suppliedwith this unit (KX-MB2025/KX-MB2030 only). R Do not extend the telephone line cord(KX-MB2025/KX-MB2030 only). Important: R See ...
Page 18 - Turning the power switch ON; Set; Menu; MBNM; DIALLING MODE
2.2 Turning the power switch ON Turn the power switch to the ON position ( A ). A 2.3 Dialling mode (KX-MB2025/KX-MB2030 only) If you cannot dial (page 42), change this settingaccording to your telephone line service. M Set N M Menu N 1 M Menu N 2 Press MBNM 1 NM 2 NM 0 N to display “ DIALLING MODE ...
Page 19 - Setting the original; Effective scanning area
2.4 Selecting the operation mode(Scan/Copy) (Fax: KX-MB2025/KX-MB2030 only) You can select the desired mode by pressing one of thefollowing buttons. KX-MB2000 KX-MB2010 KX-MB2025 KX-MB2030 – M Scan N : Select this mode when using the unit as a scanner (page 31). – M Copy N : Select this mode when us...
Page 21 - MFNMEN; MCNMDN
2.6 Help function (KX-MB2025/KX-MB2030 only) The unit contains helpful information, which can beprinted for reference.– “ BASIC SETTINGS ” – “ FEATURE LIST ” – “ PHONEBOOK ” – “ FAX RECEIVING ” – “ COPIER ” – “ REPORTS ” – “ CALLER ID ” MFNMEN M Set N M Menu N 1 Press M Menu N repeatedly to display ...
Page 22 - PM
2.8 Date and time We recommend you to set the date and time. The otherparty will receive your unit’s date and time as the headerinformation. MFNMEN M Set N M Menu N M Fax N * The pictured model is KX-MB2025/KX-MB2030. 1 M Menu N A MBNM 1 NM 0 NM 1 N A M Set N 2 Enter the current date/month/year by s...
Page 28 - program access and computer defaults]; If the
For Windows 2000:1. [Start] A [Settings] A [Control Panel] A [Internet Options] A [Programs] A [E-mail] 2. Select the desired MAPI-compliant Email softwaresuch as [Outlook Express] , etc. A [OK] For Windows XP:1. [Start] A [Control Panel] A [Internet Options] A [Programs] A [E-mail] 2. Select the de...
Page 30 - Easy Print Utility; Printer settings
– Labels that do not completely cover the backing sheet as follows: 3.2 Easy Print Utility By printing using the Panasonic Easy Print Utility insteadof the printer driver, you can use useful printing featuresfor your convenience.– Preventing unnecessary prints by checking the preview on PC screen – ...
Page 31 - NMCNMDNMEN
4.1 Scanning from the unit (PushScan) You can easily scan the document by using the operationpanel on the unit. You can select one of the followingscanning modes depending on how you intend to use thescanned image.– Viewing using Multi-Function Viewer (Viewer)– Saving as a file to your computer (Fil...
Page 35 - MCN; TEXT
5.1 Making a copy 5.1.1 Using the scanner glass M Fax Auto Answer N M Resolution N M Contrast N M Stop N M Start N M Copy Size N M Copy N M Set NMCNMDNMEN * The pictured model is KX-MB2025. 1 If the M Copy N light is OFF, turn it ON by pressing M Copy N . 2 Set the original (page 19). 3 If necessary...
Page 36 - More copying features
5.1.2 Using the automatic document feeder(KX-MB2010/KX-MB2025/KX-MB2030 only) M Copy N M Stop N M Start N * The pictured model is KX-MB2010. 1 If the M Copy N light is OFF, turn it ON by pressing M Copy N . 2 Set the original (page 20). 3 If necessary, change the copy size (originaldocument size and...
Page 37 - MFN; COLLATE; ON; PROOF SET
Example: 150 % enlarged copyUsing the scanner glass ( A ): Original document Enlarged copy A Using the automatic document feeder (KX-MB2010/KX-MB2025/KX-MB2030 only): Original document Enlarged copy Example: 70 % reduced copyUsing the scanner glass ( A ): Original document Reduced copy A Using the a...
Page 41 - While; PC PRINTING; or; PRINTING; will be displayed. The unit
1 Set the original (page 19). 2 While “ PC PRINTING ” or “ PRINTING ” (KX-MB2025/KX-MB2030 only) is displayed, press M Copy N . 3 Make necessary settings such as number of copies,resolution, zoom features and page layout features. A M Start N R “ COPY RESERVED ” will be displayed. The unit will star...
Page 42 - Sending a fax manually
6.1 Sending a fax manually 6.1.1 Using the scanner glass By using the scanner glass, you can send a page frombooklets or small size paper. M Resolution N M Contrast N M Redial N M Fax N M Start N M Set N M Quick Scan N 1 If the M Fax N light is OFF, turn it ON by pressing M Fax N . 2 Set the origina...
Page 43 - Using the automatic document feeder; Fax; MCNMDNMEN
fax transmissions and receptions, make sure feature#402 is activated (page 62). For an explanation of themessages, see page 80. 6.1.2 Using the automatic document feeder M Fax N M Quick Scan N M Monitor N M Start N 1 If the M Fax N light is OFF, turn it ON by pressing M Fax N . 2 Set the original (p...
Page 44 - Using the automatic document feeder
4 M Menu N Note: R A hyphen or a space entered in a telephone numbercounts as 2 digits. 6.2.3 Editing a stored item 1 M Phonebook N 2 Press MCN or MDN repeatedly to display the desired item. A M Menu N A MGN 3 Edit the name if necessary. A M Set N 4 Edit the telephone number if necessary. A M Set N ...
Page 45 - Broadcast transmission; PHONEBOOK
4 M Start N 6.4 Broadcast transmission You can send the same document to multiple parties (upto 20). To use this feature, store the fax numbers intobroadcast memory as follows. Broadcast: Store items using one-touch dial or phonebook (page 43). Manual broadcast: Store items using one-touch dial or p...
Page 49 - Start; MGN; Stop; INCOMING CALL
6.8 Receiving a fax manually –Auto answer OFF R A4 or letter size recording paper can be used. 6.8.1 Activating TEL mode 1 Make sure feature #404 is set to “ TEL ” beforehand (page 62). 2 Press M Fax Auto Answer N repeatedly to display “ TEL MODE ” . R The M Fax Auto Answer N light turns OFF. Fax Au...
Page 51 - change the ring
6.9 Using the unit with ananswering machine 6.9.1 Setting up the unit and an answeringmachine 1 Connect the answering machine ( A ). R Answering machine is not supplied. R Remove the stopper ( B ) if attached. A B * The pictured model is KX-MB2030. 2 Set the number of rings on the answering machine ...
Page 52 - Activating the junk fax prohibitor
6.11 Junk fax prohibitor(preventing fax reception fromundesired callers) If you subscribe to Caller ID service (page 55), thisfeature prevents fax reception from calls that do not showcaller information.Additionally, the unit will not accept faxes originating fromnumbers that match the ones on a pro...
Page 54 - What “ ” means; to go back to the list. You can
4 Select the [WEB FAX PREVIEW] tab. 5 Enter the web fax preview access code (feature #450on page 53). A [Submit] R A list of the received fax documents will bedisplayed. 6 Click the desired icon to preview, print or save a faxdocument. R While previewing the document, you canmanipulate the fax docum...
Page 55 - Caller ID service; OUT OF AREA
7.1 Caller ID service This unit is compatible with the Caller ID serviceoffered by your local telephone company. To use thisunit’s Caller ID features, you must subscribe to aCaller ID service. Important: R This unit is designed in accordance with the ETS(European Telecommunication Standard) andonly ...
Page 56 - Erasing caller information; CALLER; Erasing specific caller information; Storing caller information; DIAL
To correct a mistake1. Press MFN or MEN to move the cursor to the incorrect number. 2. Press M Stop N to delete the number. 3. Enter the correct number. To delete a number Press MFN or MEN to move the cursor to the number you want to delete and press M Stop N . 7.4 Erasing caller information 7.4.1 E...
Page 57 - MBN
8.1 Programming M Set N M Menu N 1 M Menu N 2 Press MBN and the 3-digit code (page 58 to page 73). 3 Press the appropriate selection to display the desiredsetting. R This step will vary depending on the feature. 4 M Set N 5 Press M Menu N to exit. To select features through the web browser interface...
Page 61 - Selection; To set the length of time before the unit enters power save mode.; Setting toner save feature
Feature/Code Selection Setting the recording papertype for paper input tray MBNM 3 NM 8 NM 3 N M 1 N “ PLAIN PAPER ” (default): 75 g/m 2 to 90 g/m 2 paper. M 2 N “ THIN PAPER ” : 64 g/m 2 to 75 g/m 2 paper. Note: R This setting will be deactivated when printing from a computer. To set therecording p...
Page 68 - PC print features; Enter the desired data timeout setting from; OFF
8.5 PC print features Feature/Code Selection Changing the data timeoutsetting MBNM 7 NM 7 NM 4 N The unit will automatically print the remaining data in memory when thecomputer does not send data to the unit during the set time. 1. M Menu N A MBNM 7 NM 7 NM 4 N A M Set N 2. Enter the desired data ti...
Page 75 - Useful Information
9.1 Character entry The dial keypad is used to enter characters andnumbers.– Press MFN or MEN to move the cursor. – Press the dial keys to enter characters and numbers.– Press M Stop N to erase the character or number highlighted by the cursor. Press and hold M Stop N to erase all characters or numb...
Page 76 - Status of the unit
9.2 Status of the unit 9.2.1 Using Remote Control You can easily operate the following functions from yourcomputer.– Programming the features (page 58) KX-MB2025/KX-MB2030 only: – Storing, editing or erasing items in directories (page 43) – Storing or erasing items for broadcast transmission (page 4...
Page 77 - Cancelling the operations
9.3 Cancelling the operations You can cancel the current operation from the unit. Youcan also select the desired operation to cancel. 1 M Stop N R “ USER STOPPED ” is displayed. R If “ USER STOPPED ” is not displayed, go to step 2. 2 To cancel printing: Press M Stop N repeatedly to display “ STOP PR...
Page 78 - C D
3 Insert the tab ( C ) and rib ( D ). D C Caution: R When moving the unit, be sure to hold by the grip.Do not hold by the handset unit. Correct Incorrect Note: R While talking to the other party, you can send a faxusing the scanner glass by pressing M Start N , and then M 1 N (To receive a fax, pres...
Page 79 - LISA
To search for a name by initialExample: “ LISA ” 1. M Phonebook N 2. Press MCN or MDN to initiate the phonebook. 3. Press M 5 N repeatedly to display any name with the initial “ L ” (see page 75 for character entry). R To search for symbols, press MGN . 4. Press MCN or MDN repeatedly to display “ LI...
Page 80 - R M
10.1 Report messages (KX-MB2025/KX-MB2030 only) To indicate the unit’s fax transmission/reception status, one of the following messages will be printed on the sendingand journal reports (page 42). Message Code Cause & Solution COMMUNICATION ERROR 40-4246-72 FF R A transmission or reception error...
Page 81 - Display messages; Display
10.2 Display messages To indicate the unit’s status, one or more of the following messages will appear on the display. Display Cause & Solution “ CALL SERVICE ” R There is something wrong with the unit. Contact our service personnel. “ CHANGE DRUM ” R There is something wrong with the drum cartr...
Page 84 - When a function does not work
10.3 When a function does not work 10.3.1 General Problem Cause & Solution The unit does not work. R Check the connections (page 17, 26). The output tray becomes fullquickly or the recording paperdoes not stack properly onthe output tray. R High humidity may cause the recording paper to curl. Tr...
Page 85 - A B C; A blank sheet is ejected.
Problem Cause & Solution I forgot the password forfeature programming viaremote operation. R You may have changed the feature programming password. If you do notremember it, assign a new password using feature #155 (page 59). Whenrequired to enter the current password, enter “ 0101 ” instead. 10...
Page 91 - the unit’s name
1 Insert the CD-ROM that is supplied with the unit into your CD-ROM drive. R If the [Select Language] dialogue box appears, select the desired language that you want to use with this software. Click [OK] . 2 [Tools] A [Windows Firewall Setting] R The [Windows Firewall Setting Tool] window will appea...
Page 92 - Recording paper jam; PAPER JAMMED; Pull open the paper input tray (
11.1 Recording paper jam Caution: R Do not pull out the jammed paper forcibly beforeopening the top cover. R To prevent injuries, be careful not to put yourhands under the top cover. 11.1.1 When the recording paper has jammedinside of the unit The display will show the following:– “ PAPER JAMMED ” L...
Page 96 - Remove the recording paper.
5. Close the top cover by holding the indentations onboth sides of the unit, until locked. 11.1.2 When the recording paper is not fedinto the unit properly The display will show the following:– “ CHECK PAPER #1 PRESS START ” 1 Pull the paper input tray until it clicks into place, thenpull it complet...
Page 97 - ) while holding the document
Note: R If the message is still displayed, check the recordingpaper specifications and re-install recording paper.See page 15 for details. 11.2 Document jams (Automaticdocument feeder) (KX-MB2010/KX-MB2025/KX-MB2030 only) Note: R The pictured model is KX-MB2010. Caution: R Do not pull out the jammed...
Page 98 - Remove the jammed document (
2 Remove the jammed document ( C ) carefully. When the document has jammed near thedocument entrance: C When the document has jammed near thedocument exit: C 3 Close the ADF cover. 98 11. Paper Jams
Page 103 - Reference lists and reports
13.1 Reference lists and reports You can print out the following lists and reports for yourreference.– “ SETUP LIST ” – “ TEL NO. LIST ” *1 – “ JOURNAL REPORT ” *1 – “ BROADCAST LIST ” *1 – “ PRINTER TEST ” – “ CALLER ID LIST ” *1 – “ ADDRESS LIST ” *2 – “ FTP SERVER LIST ” *2 – “ SMB FOLDER LIST ” ...
Page 117 - JPEG
* This library is free for commercial and non-commercial use as long as * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * lhash, DES, etc., code; not just the SSL code. The SSL documentation * included with this ...
Page 121 - Notes
