Page 2 - Contents
Using Wireless Manager ME .....18 Startup................................................18Description of the connection selectwindow ...............................................18Description of the launcher and menu .....19Live mode ..........................................20 Quitting live mode...
Page 4 - Do not use near other wireless equipment.; Notes on Using the Wireless Card
4 The optional wireless card (ET-CDWL3U or ET-CDWL2U) uses radio waves in the 2.4GHz band. A radio station license is not required when using this wireless card, but be sure toread and fully understand the following items before use. ■ Do not use near other wireless equipment. The following equipmen...
Page 6 - Channels that can be used
6 ■ Channels that can be used The channels (frequency range) that can be used differ according to the country orregion where the wireless card is used. Refer to the table below. When using the ET-CDWL3U card (See page 43 for details on using the ET-CDWL2U card) Country or region Japan United States ...
Page 7 - Examples of Network Function Usage; Controlling the projector by WebBrowser Control
7 Computer Transmission Installation Optional wireless card Supplied wireless card installed here Wireless Manager MEWireless LAN Driver Projector Examples of Network Function Usage Software Installation(See page 8) Simple wirelessconnection(See page 15) Projecting a computer image by wirelessoperat...
Page 8 - Software Installation; System requirements
8 Software Installation The computer must meet the following requirements in order to use the suppliedsoftware. OS: Windows XP/2000/Me (Millennium Edition)/98SE (Second Edition) CPU: Pentium III or faster or compatible processor (Celeron 633 MHz orfaster is recommended. However, 800 MHz or faster is...
Page 10 - Wireless LAN Driver
10 Software Installation (cont.) Notes: • Be sure to install the Wireless LAN Driver in the computer before inserting the wireless card into the computer. • If you insert the card into the computer by mistake before installing the driver, the card is recognized by the hardware auto detect function a...
Page 13 - Insertion; Removal
13 1 Hexagonal key wrench (supplied) Card lock 2 4 5 3 Insertion • Before inserting the wireless card, turn off the power and keep it off for the duration of the procedure. • Attempting to force in the wireless card facing the wrong direction may result in malfunction. 1 2 3 Removal Before inserting...
Page 14 - Inserting and Removing the Wireless Card to and from a Computer
14 Removal Insertion Shut down Wireless Manager ME if it is in use. Click the [PC card] icon displayed in the task bar at the lower right ofthe screen. When the [PC card] icon is not displayed:Open [Start] → [Control Panel] → [PC card], place a check in the [Show control on the task bar] checkbox, a...
Page 15 - Simple Wireless Connection; Projector operations; Insert the supplied wireless card into the projector.; Turn on the projector.
15 Simple Wireless Connection (Using the Initial Settings) When making a wireless connection between the projector and the computer using thedefault settings with the supplied wireless card and the optional wireless card (ET-CDWL3U or ET-CDWL2U), the IP address, communication mode and other necessar...
Page 16 - Computer operations; Insert the optional wireless card into the computer.
16 Computer operations Insert the optional wireless card into the computer. (See page 14) 1 Turn on the computer. 2 Select [Start] → → [Programs] → → [Panasonic Wireless Display] → → [Wireless Manager mobile edition]. • Wireless Manager ME starts up, and the connection select window shown below appe...
Page 17 - Canceling the connection with the projector
17 Canceling the connection with the projector Click [ ] on the launcher. The following window appears. 1 Click [Yes]. The computer returns to the original network settings when the connection isended.However, note that some time may be needed to return to the original networksettings. 2 Simple Wire...
Page 18 - Using Wireless Manager ME; Description of the connection select window; Startup
18 Using Wireless Manager ME Description of the connection select window When the network number to bec o n n e c t e d d i f f e r s , s e l e c t t h enetwork number to be connected.T h e n e t w o r k s e t t i n g s c h a n g eaccording to this selection.This network number is stored inthe compu...
Page 19 - Description of the launcher and menu
19 Description of the launcher and menu Live Mode: Displays the computer screen over the entire projection screen. Multi Live Mode: Display the computer screen in one of the four areas on theprojection screen. One Shot: Transmits a snapshot of the current computer screen to theprojector one time. Re...
Page 20 - Live mode; Quitting live mode
20 Live mode Check the status indication on the launcher to makesure that transmission is possible (check that thegreen lamp is lighted). 1 Click [ ] on the launcher. The current computer screen is transmitted to the selected projector. In the livemode the projector is occupied by a single computer,...
Page 21 - Multi live mode; Select and click the projection position.; Switching to a different position; Quitting multi live mode
21 Multi live mode This mode lets you transmit the images from four computers at the same time to asingle projector. Furthermore, you can select either the “4-screen style” or the “Indexstyle” for this mode, and switch alternately between the modes by pressing the[IndexWindow] button on the remote c...
Page 22 - Enlarged display
22 ■ Index style Using Wireless Manager ME (cont.) Check the status indication on the launcher to makesure that transmission is possible (check that thegreen lamp is lighted). 1 Click [ ] on the launcher. 2 Select and click the projection position. The computer image is transmitted to the area of th...
Page 23 - One shot mode
23 One shot mode In this mode, a snapshot of the current computer screen is transmitted to the projector. Check the status indication on the launcher to makesure that transmission is possible (check that thegreen lamp is lighted). 1 Click [ ] on the launcher. 2 Using Wireless Manager ME (cont.) Quit...
Page 24 - Pointer mode; Quitting pointer mode; Options; Picture quality selection
24 Click [ ] on the launcher. The following window appears. Pointer mode You can change the shape of the pointer appearing on the projection screen in livemode to one that can be used for presentation purposes. Click [ ] on the launcher. ■ Quitting pointer mode Click [ ] on the launcher. Options You...
Page 25 - Live mode settings; Shortcut key settings
25 ■ Live mode settings You can set the computer operation in live mode and multi live mode. [Remove image when shutting down Live Mode]: Check this box to clear the projection screen from the projector when live modeends. Normally the image when live mode ends remains projected. [Disable Screen Sav...
Page 26 - Adding and deleting connections; Adding a connection; Operations when password entry is required for connection; Deleting a connection
26 Adding and deleting connections Click [ADD] and enter the IP address(including its periods) of the connectionto be added, and then click [REGISTER]. The newly registered connection is added to theconnection list in the window shown in step 1. 2 Click [Designate] at theconnection select window. Th...
Page 27 - Displaying the Network Menu
27 Displaying the Network Menu Perform the procedure below to display the network menu required when changing theinitial settings. Press the [MENU] button on the projector. The main menu appears. 1 Select [NETWORK] with the [ ] buttons, then press the [ENTER] button. The network menu appears. 2 N E ...
Page 28 - Other Applications; Changing the network number
28 When making a wireless connection between a computer and the projector withsettings other than the default settings, make the following settings. Other Applications (Changing the Initial Settings) Changing the network number ■ Projector operations Select [NETWORK] at the network menu and press th...
Page 29 - Wireless connection with password
29 Wireless connection with password ■ Projector operations This setting is used to limit the users that can connect to the projector. Select [INPUT PASSWD] on thenetwork menu. 1 Select [ON] with the [ ] buttons. 2 Select [AMEND PASSWD] at thenetwork menu and press the[ENTER] button. 3 Enter the pas...
Page 30 - Wireless user connections; Start up the wireless card utility.; Setting Example
30 Other Applications (Changing the Initial Settings) (cont.) Wireless user connections 1 O F F O N N E T W O R K N A M E C H A N G E I N P U T P A S S W DA M E N D P A S S W DW E B C O N T R O LD E F A U L T S E L E C T N E T W O R K R E T R N E N T E R Select [NETWORK] on the networkmenu, and pres...
Page 31 - Changing the user settings; Change the projector settings by WEB Control.
31 Other Applications (Changing the Initial Settings) (cont.) Changing the user settings ■ Projector operations Connect the projector and computer before taking the steps below. (See page 15 or page 30) 1 O F F O N N E T W O R KN A M E C H A N G E I N P U T P A S S W DA M E N D P A S S W D W E B C O...
Page 32 - Computer settings
32 Computer settings ■ TCP/IP settings Windows XP/2000: The screens show the example for Windows XP. (1) Right-click [My Network Places] to open the Properties window. (2) Right-click [Panasonic Wireless LAN PC Card] to open the Properties window. (3) S e l e c t I n t e r n e t P r o t o c o l ( T ...
Page 37 - Returning to the Initial Settings; and
37 Returning to the Initial Settings You can return the changed settings to the initial conditions. Select [DEFAULT] at the network menu (See page 27) and press the [ENTER] button. 1 Select [OK] with the [ ] buttons and press the [ENTER] button. 2 1 O N O N N E T W O R KN A M E C H A N G E I N P U T...
Page 38 - Using WebBrowser Control; Projector settings; WEB CONTROL; Select [WEB CONTROL] on the network menu
38 Using WebBrowser Control Projector settings WEB CONTROL ON: WebBrowser Control is enabled. OFF: WebBrowser Control is disabled. Select [WEB CONTROL] on the network menu (See page 27) . 1 Select [ON] or [OFF] with the [ ] buttons. 2 Note: The WebBrowser Control password is not set at the factory, ...
Page 40 - Starting up WebBrowser Control; Top window
40 Starting up WebBrowser Control Click [ ] on the launcher (see page 16) or start up the browser software, and enter the IP address set by the projector. (The example below describes the case when using Microsoft Internet Explorer.) WebBrowser Control starts up. ■ Top window Notes: • If you forget ...
Page 41 - Projector control; Basic control window
41 Projector control Click [Projector Control] in the menu. You can make various projector settings. ■ Basic control window ■ Option control window Notes: • Connection with the projector may not be possible immediately after the power is turned on. In this case wait a bit and then make the connectio...
Page 42 - Monitor information window; Network setting window
■ Monitor information window Note: The monitor information is refreshed atf i x e d i n t e r v a l s , b u t t h e c u r r e n t e x a c tinformation can be checked by clicking[View] → [Refresh]. Using WebBrowser Control (cont.) ■ Network setting window ■ Password changing window Click [Network Set...
Page 44 - Installing the Wireless LAN Driver
44 Using the ET-CDWL2U (Optional wireless card) (cont.) The Wireless LAN Driver must be installed in order for the wireless card to be used inthe computer.• The example of the procedure described below is for installing the ET-CDWL2U card.• Some windows appear in English. ■ Installing the Wireless L...
Page 49 - Settings for ET-CDWL2U use
49 Using the ET-CDWL2U (Optional wireless card) (cont.) ■ Settings for ET-CDWL2U use Windows XP: The dedicated utility software is not necessary. Refer to the Windows XP manual for adetailed description. (1) Turn on the projector. (2) Select [Start] → [Connect To] → [Show all connections] → [Wireles...
Page 52 - Software Uninstall; Wireless Manager ME; [Uninstall Wireless Manager mobile
52 Software Uninstall Wireless Manager ME From the desktop, select [Start] → → [Programs] → → [Panasonic Wireless Display] → → [Uninstall Wireless Manager mobile edition]. Follow the instructions appearing on the screen and uninstall the software. Wireless LAN Driver ■ Windows XP: Set the supplied C...
Page 53 - Terminology
53 Terminology 802.11 AdHoc (Peer to Peer) mode This mode performs communication directly between the projector and a computerwith a built-in wireless LAN or a computer with a wireless LAN card mounted. TheSSID must be set. Access point A wireless station used to connect a wired LAN and a wireless L...
Page 55 - Troubleshooting
55 Troubleshooting Check the following points once more before requesting repair. Symptom Checkpoint T h e i m a g e f r o mthe computer doesnot appear. T h e c o m p u t e rdoes not recognizethe wireless card. The transfer rateis slow. • I s t h e e x t e r n a l v i d e o o u t p u t o f t h e l a...
Page 57 - Trademarks; Panasonic Broadcast & Television Systems Company; Panasonic Canada Inc.
Trademarks Notes: • Unauthorized use or reproduction of part or all of this product software and manuals is strictly prohibited. • Panasonic cannot be held liable for any effects resulting from the use of this product software and manuals. • Panasonic reserves the right to revise this product softwa...
