Panasonic EB-GD92 - Manual

Removing the Battery Push the battery release latch down (1).The base of the battery will raise out ofthe recess (2). The battery can now beremoved from the phone (3). Charging the Battery Connecting the ACAdaptor The battery pack must be attached tothe phone before the AC Adaptor isconnected. Inser...

Low Battery Warning When the battery power is low a warning tone will sound and ablinking LOW BATTERY message will be displayed. If this occurs during conversation finish your call immediately. Thepower will be automatically shut off shortly after the warningtone. Fully charge the battery pack or re...

The Menu System The menu system provides the means for accessing all the functions which do nothave their own dedicated buttons on the keypad. The menu functions can be selected using a combination of the Navigation key g and the menu Select key B . During a call a restricted menu will be available....

Basic Operation Switching the Phone On/Off To switch the phone on or off. Press and hold E to switch power on A greeting animation will be displayed and then the phone willgo into Idle mode. Press and hold E to switch power off Making a Call Ensure that the phone is switched on, the network operator...

Automatic Redial When a call is unsuccessful the phone may ask if you want toredial the phone number again automatically. Press B when Ok is displayed in the option area and the display will countdown in seconds to the next redial. To stop redialling, press B when Cancel is displayed in the option a...

Locking the Phone With the Phone Lock enabled you will be restricted to answer incoming calls andmake emergency calls only. The Phone Lock Code is factory set to “0000”. 1 From Idle mode press B 81 to enter the Phone Lock menu 2 Press B 3 Enter the 4-digit code and press B The phone will be locked a...

Phonebook Phone numbers can be stored in two locations. You can store numbers in the SIMPhonebook (therefore the number of locations, length of name and number of phonenumbers are SIM dependant). Alternatively you can store phone numbers in theMobile Phonebook, this means that if you change the SIM ...

Overwrite Protection If a location is occupied you will be prompted to confirm that you wish to overwrite thecurrent information. Press B to overwrite the selected location Press C to choose another location number Browsing Phonebook You can search the Phonebook by either Name or Location. The defau...

Detail Displays each element of the selected Phonebook entry. Use e to display the next/previous element of the entry. Each element may be edited - use f until Edit is displayed in the option area and press B . View Displays an individual name and phone number in the names list. If an e-mail address...

Retitling Group Names 1 From Idle mode press B 24 to enter the Group Settings menu 2 Use e to select the group 3 Use f until Edit is displayed in the option area and press B 4 Clear the current title and re-enter - see “Text Entry” page 42 5 Press B Using Alert Profiles Alert Profile enables you to ...

Hot Key Phone Numbers It is possible to dial phone numbers from the Phonebook or Service Dial part ofPhonebook very quickly. Some Hot Key Phone numbers may be reserved by theService Provider, for example the first three Hot Key Phone numbers may be linkedto Service Dial (network dependent). 1 Press ...

Personalising Your Phone Add a Start-up Greeting A personalised greeting can be programmed for when the phone is switched on. 1 From Idle mode press B 531 to enter the Greeting menu 2 Use the text entry facility to add your greeting and press B - see “Text Entry” page 42 Displaying Animations Animat...

Composing a Melody Up to 3 user-defined melodies can be created. 1 From Idle mode press B 524 to enter the Melody Composer menu 2 Use e to cycle through the melodies 3 Press B to edit the chosen melody Using the following table as reference, enter the notes (from the choice of low, middleand high), ...

Phone Security The phone features a number of security functions that protect against unauthorizeduse, and enable you to restrict access to certain features - see “Using the PIN” page8. It is recommended that you memorize your security codes. If you need to make anote of your security codes, never w...

Restricting Calls Call Barring The Call Bar function is used to restrict certain outgoing and/or incoming calls. Call Bar is controlled by a security password that is supplied by your Service Provider.When updating or checking the status of Call Bar the phone must be registered with anetwork. Differ...

Applications Clock This phone incorporates a clock with date/time, an alarm and a power on/off feature. A second clock for dual time is also included - see “Second Clock” page 41. Initially Setting the Home Time 1 From Idle mode press B 41111 to enter the Time Set menu and press B 2 Use e to select ...

Setting the Alarm If you have not already set the clock, you will be prompted to do so prior to setting thealarm. There are four separate alarms, each of which may be set independently. 1 From Idle mode press B 413 to enter the Alarm Set menu and press B 2 Use e to select the alarm to be set and pre...

Setting a Power On/Off Time You can set your phone to turn itself on or off automatically at a specified time usingthe Power On/Off feature. The procedure for setting/adjusting the Power On/Offautomatically is similar to that for setting the time on the clock. For either setting oradjusting the time...

Note : Press and hold 1 to add a decimal point. Converting a Value 1 Check the conversion rate is the one you require and press B 2 Enter the value to be converted and press B The country code and currency rate will be retained in the phone once entered. Thenext time you use the convertor you can ed...

Short Text Messages You can receive, display, edit and/or send short text messages, of up to 160characters to mobile phones on the same network or any network that has a roamingagreement. Setting the Phone for Text Messages Before you can send a message you must enter the Message Centre number intoP...

Receiving Text Messages When a Short Text Message is sent to your phone the message indicator ( N ) will blink in the display, with an audible tone or vibration. This indicates that a newmessage has been received. When Read is displayed in the option area press B to read the message. Use g to naviga...

User Defined Message Creating a User Defined Message It is possible to create a user defined message which, once generated, can be usedas any other pre-defined message. From Idle mode press B 314 . Edit the message as required and press B . Selecting the User Defined Message From Idle mode press B 3...

Enabling/Disabling Broadcasts 1 From Idle mode press B 3171 to enter the Receive menu 2 Press B Once enabled, following the same procedure will disable broadcasts. Message List This is a store for the last received broadcast messages. Messages can be deletedfrom here. Language The Language in which ...

Call Information Recent Numbers Recently dialled phone numbers will be stored in Last Dialled . If Caller Identification is available the caller’s phone number for an answered call willbe stored in Answered and an unanswered call will be stored in Unanswered . If Caller Identification is not availab...

Call Charges To maintain control over the cost of calls that are made, the phone can be set torestrict use to a finite number of units overall. Setting the Unit Price Firstly, a price per unit must be entered. This is the cost that the Service Providercharges for one unit of call time. 1 From Idle m...

Advanced Operation Diverting Calls Voice, fax and data calls can be diverted using different circumstances and todifferent numbers. For example you may wish voice calls to be diverted to Voicemailin the event that the phone is switched off. 1 From Idle mode press B 7 to enter the Call Divert menu 2 ...

End Current Call and Receive Second Call 1 Press E with a waiting call 2 Press any key except E or g Operation During Two Calls Swapping Between Calls The ! prompt indicates the current call Press B when Swap is displayed in the option area End Current Call 1 Press f to display End in the option are...

Adding to Multi-party You can add to the Multi-party call (up to a maximum of five). Either by making a callor accepting an incoming call. The call can then be merged into the Multi-party. Note : When making a call or accepting an incoming call the Multi-party call will be placed on hold. The caller...

Changing to a New Network When not in your home country you may use a network that you do not directlysubscribe to, this is called ROAMING. National Law may not permit roaming in yourhome country. The New Network function is used to manually select a network that is available in your current locatio...

Internet E-mail Using the E-mail function you can send and receive e-mail messages to the mail server of an Internet Service Provider. E-mail Setup Before you can send and receive e-mail messages, your SIM must be data enabledand a contract must be set up with an Internet Service Provider and the re...

Send/Receive Messages The Send/Receive function is used to both send messages created on the phone to the server of the Internet Service Provider, and to check your mailbox on the serverfor incoming messages and download them to the phone at the same time. 1 From Idle mode press B 32 to enter the E-...

Forward Send the current message to a different person other than the sender Delete Remove the current message from the list Lock Apply a lock to the message so that it cannot be overwritten when receiving furthermessages. A locked message can still be deleted manually. Store an Address An e-mail ad...

Additional Features Desktop Handsfree Desktop Handsfree enables you to hold a conversation without having to hold thephone to your ear. Note : Do NOT hold the phone to your ear in Handsfree mode. Swapping Between Handsfree and Handheld Calls During a Handheld call: 1 Use f to until H’free is display...

Play Back a Voice Memo Press : from Idle mode: If there are two voice memos recorded they will both be played back continuously. Toswap playback between the two voice memos areas press : during playback. If there is no recording two tones will sound. To stop playing, press E The Note Pad function is...

DTMF Tones DTMF tones can be sent during conversation. These are often used to access voicemail, paging and computerized home banking. For example, you may need to input anumber to remotely access voice mail messages. A phone number may be stored inthe Phonebook with DTMF tones, allowing the number ...

Second Clock The Second Clock can either be set to auto-adjusting, whereby the second time willbe automatically set from the country code of the current network, or a specified timedifference can be set manually. Setting Clock Display From Idle mode press B 4121 to enter the Display Pattern menu. Us...

Text Entry The phone provides a means for entering alphanumeric characters to enter detailsinto the Phonebook, to create text and e-mail messages etc. This section details thecharacters that can be entered and the relevant keys to press. * Press * once to enter a single capital letter (subsequent ch...

Menu Structure From Idle mode pressing B will display a menu of phone features. To select a feature press e so that the pointer is showing next to the feature that you require then press B . To exit the current menu and return to the previous level press C . To exit completely out of the menu struct...

Calls cannot bereceived The phone is notswitched on Switch the phone on Incoming calls arebarred Disable the incoming call barring The phone is notregistered to anetwork Move to a coverage area andoperate your phone after it hasregistered with a network. Emergency callscannot be made You are not in ...

Important Information Safety Considerations The following information should be read and understood as it provides details whichwill enable you to operate your phone in a manner which is both safe to you and yourenvironment, and conforms to any legal requirements regarding the use of cellularphones....

Specifications Telephone Type GSM900 Class 4GSM1800 Class 1 Temperature range ChargingStorage +5°C to +35°C-20°C to +60°C Battery – Attached to phone Battery Pack (S) Weight 77g Dimensions Height x Width x Depth 118.1 x 40.5 x 16.4mm Supply Voltage 3.7V DC, 650mAh Li-Ion Standby Time - Idle Mode (h)...

DK For nærmeste servicecenter ring Panasonic DanmarkTel. +45 43 20 08 50 S Firmor i SverigeKomrep Rosenlundsgatan 4 411 20 Göteborg Tel. +46 031-173354Signalstyrkan Kungsholmstorg 4 104 22 Stockholm Tel. +46 08-6542500CR service Industribyn 3 232 37 Malmö Tel. +46 040-430030 SF Huoltokeskukset Suome...

B Centres de service après-vente en BelgiqueBROOTHAERS Hoevelei 167 2630 AARTSELAAR Tel. +32 03/887 06 24HENROTTE Rue du Campinaire 154 6240 FARCIENNES Tel. +32 071/39 62 90PIXEL VIDEOTECH Rue St Remy 7 4000 LIEGE Tel. +32 041/23 46 26DELTA ELECTRONICS Rue P.d’Alouette 39 5100 NANINNE Tel. +32 081/4...