Page 2 - WARNING
2 WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel. 2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin grounding-type power plug. This plug will only fit a groun...
Page 3 - Important Safety Instructions
3 1) Read these instructions. All the safety and operating instructions should be read before the appliance is operated. 2) Keep these instructions. The safety and operating instructions should be retained for future reference. 3) Heed all warnings. All warnings on the appliance and in the operating...
Page 4 - Dear Panasonic Customer; from yo u r n ew c olor television set.
4 Dear Panasonic Customer FCC CAUTION: Pursuant to 47CFR, Part 15.21 of the FCC rules, any changes or modifications to this TV not expressly approved byMatsushita Electric Corporation of America could result in harmful interference and would void the user ’s authority tooperate this device. Note: Th...
Page 5 - Table of Contents
5 SURROUND ............................................................... 28SPEAKERS ................................................................. 28 CHANNELS Adjustment .............................................. 29 CHANNEL SCAN ........................................................ 29FAV...
Page 6 - Precaution on battery use; Installation; Receiver Location; Remote Control Battery Installation
6 Precaution on battery use Incorrect installation can cause battery leakage and corrosion thatwill damage the remote control transmitter. Observe the following precautions: 1. Batteries should always be replaced as a pair. Always use new batteries when replacing the old set. 2. Do not combine a use...
Page 7 - Cable Connection; Connecting the Aerial cable to the RF In Terminal
7 Cable Connection Connecting the Aerial cable to the RF In Terminal DIGITAL IN
Page 8 - Optional Equipment Connections; Cable Box Connection; Front Control Panel
8 Follow this diagram when connecting your television to a cable box only. Optional Equipment Connections Note: The remote control must be programmed with supplied codes to operate the cable box (see page 51). Procedure 1. Select ANT2 in the SET UP menu.2. Tune the television to Channel 3 or Channel...
Page 9 - VCR Connection
9 Cable Connection Follow this diagram when connecting your television to a VCR only. Note: The remote control must be programmed with supplied codes to operate the VCR (see page 49, 50). VCR Connection Procedure 1. Select ANT1 in the SET UP menu.2. Tune the television to the television program you ...
Page 10 - VCR and Cable Box Connection
10 Cable Connection Follow this diagram when connecting your television to both a VCR and a cable box. Notes: (1) Similar connections are available at the INPUT 1, 2, 3, 4 input terminals. Input 4 is located on the front of the unit. Select the desired VIDEO input position by pressing the TV/VIDEO b...
Page 13 - Connecting the Plug to the Wall Outlet
13 Power ON / OFF Connecting the Plug to the Wall Outlet Note: The TV’s power cord must first be plugged into the walloutlet and then turned on at the POWER switch (standbymode).
Page 14 - VHF, UHF and Cable TV; VHF and UHF
14 VHF, UHF and Cable TV Press to turn the TV on (See page 13). Press TV to operate the TV set with the remote control. Press to select the desired channel. Select the desired volume level. Notes: (1) The channel number and volume level remain the same even after the TV is turned off. (2) Power cons...
Page 15 - Confirming; Cable TV
15 A CTION 1 2 3 4 5 6 7 8 0 9 TV DTV AUX DVD VCR DBS RCVR CH CH VOL VOL PLAY R-TUNE PROG GUIDE RECALL SAP PAGE EXIT PIP SPLIT MOVE SWAP STOP PAUSE REC PIP MAX FF PIP MIN REW BBEMENU FREEZE TV/VCR PIP CH VCR CH SEARCH OPEN/CLOSE M UT E ASPE CT TV/VIDEO LIG H T POWER CBL Confirming Confirm that regis...
Page 16 - Illuminated Remote Control; Location of Controls
16 Illuminated Remote Control Location of Controls Power button Press to turn the TV ON or OFF (See page 13). Note: The TV’s power cord must first be plugged into the wall outlet and then turned on at the POWER switch (standby mode). R-TUNE button Switches to previously viewed channel or video mode....
Page 18 - Basic Menu Operations; To return to MAIN MENU: To return to previous screen:
18 Basic Menu Operations 1 A CTION CH CH VOL VOL Press to display the menu screen. Press to select desired menu icon. Press to enter submenu field. 2 Press to select desired submenu feature. Press to select or adjust. A CTION CH CH VOL VOL Press to select OTHER ADJ. Press to enter option menu field....
Page 20 - SET UP Operation; MENU Languages; ANTENNA Selection; cc; cc; cc ON MUTE
20 SET UP Operation MENU Languages In SET UP Menu, select IDIOMA / LANGUE to change menu language toENGLISH, ESPAÑOL (Spanish) or FRANÇAIS (French). A CTION CH CH VOL VOL Press to select IDIOMA / LANGUE. ENGLISH Press to select ENGLISH, SPANISH or FRENCH. ANT1 ANT2 ANTENNA Selection To select either...
Page 21 - cc MODE; Selecting option menus in OTHER ADJ.
21 SET UP Operation cc MODE Activates the On-Screen Closed Caption feature. When activated this feature will remain on until OFF is selected inthis menu. A CTION CH CH VOL VOL Press to select cc MODE. Press to select from the following: OFF C1 C2 T1 C4 T3 T4 C3 T2 • CAPTION OFF -• CAPTION C1 - • CAP...
Page 22 - AUTO PROGRAM; MODE Selection
22 AUTO PROGRAM A CTION CH CH VOL VOL To automatically program all channels with signal. Press to select AUTO PROGRAM. Press to start AUTO PROGRAM. MODE Selection To select either CABLE or TV. A CTION CH CH VOL VOL CABLE TV Press to select MODE. Press to select CABLE or TV. MANUAL PROGRAM To manuall...
Page 23 - AUTO POWER ON; CHAN BANNER; Geomagnetic correction (Adjusting skewing of images)
23 SET UP Operation AUTO POWER ON Select SET to power up the TV at the same time as the cable box or other components or select OFF. A CTION CH CH VOL VOL Press to select AUTO POWER ON. Press to select SET or OFF. SET OFF CHAN BANNER A CTION CH CH VOL VOL Select ON to display the CHANNEL BANNER on t...
Page 24 - IMAGE SHIFT; PICTURE MODE; PICTURE Adjustment
24 For use as a screen saver, this function changes the entire image position (shift). SET UP Operation IMAGE SHIFT OTHER ADJ. SET UP PRESS ACTION TO RETURN ON PRESS FOR MORE IMAGE SHIFT ON IS RECOMMENDED A CTION CH CH VOL VOL Press to select IMAGE SHIFT. Press to select ON or OFF. PICTURE MODE A CT...
Page 25 - COLOR MATRIX
25 COLOR MATRIX Displays input signals (480p signals) in a natural color from digital equipment adaptors connected to COMPONENT VIDEOINPUT (Y, P b /C b ,P r /C r input terminals). SD : When the input signal is a normal TV system (NTSC). HD : When the input signal is a High-Definition system (ATSC). ...
Page 26 - FREEZE
26 FREEZE A CTION CH CH VOL VOL Press to select FREEZE. Press to select SPLIT or PIP. SPLIT PIP 1 Select SPLIT or PIP to determine the frozen picture frame during single screen. FREEZE FREEZE TV/VCR FREEZE 2 When the screen is single press FREEZE TV/VCR to freeze the screen. When FREEZE SPLIT is sel...
Page 27 - Audio Adjustment; AI SOUND
27 MODE BASS TREBLE BALANCE NORMAL OTHER ADJ. STEREO SAP MONO SET AUDIO PRESS ACTION FOR MAIN MENU Audio Adjustment A CTION CH CH VOL VOL Press to select MODE. Note: AUDIO MODE selection is also possible by pressing the SAP button on the remote control (see page 17). Selecting STEREO/SAP/MONO Red di...
Page 28 - SPEAKERS; SURROUND
28 ON To enjoy a concert hall effect, turn the SURROUND to ON.SURROUND function is effective when BBE VIVA is set to OFF. Press to select ON or OFF. ON OFF Notes: During stereo sound or soft playing : SURROUND set to ON. During monoural sound : SURROUND set to OFF. Press to select SURROUND. AI SOUND...
Page 29 - CHANNEL SCAN; CHANNELS Adjustment; FAVORITE CHANNELS Selection
29 CHANNEL SCAN Let you select the channel scanning mode either FAV or ALL. CHANNEL SCAN FAV To enter up to 16 favorite channels. CHANNEL SCAN ALL To scan all channels when using the CH up/down buttons. CHANNELS Adjustment FAV ALL A CTION CH CH VOL VOL Press to select CH. SCAN. Press to select FAV o...
Page 31 - MANUAL CAPTION; OR; INPUT LABEL
31 Enter channel numbers and captions manually. MANUAL CAPTION 1 Press to select MANUAL CAPTION. Press to display next menu. A CTION CH CH VOL VOL 1 2 3 4 5 6 7 8 0 9 A CTION CH CH VOL VOL Use remote numeric keypad to select desiredchannel (refer to your local TV guide). 2 Press to enter desired cha...
Page 32 - TIMER; SLEEP; TIMER1 and TIMER2; DAY; ON TIME
32 TIMER The TIMER can switch the TV ON or OFF. Before attempting TIMER1 and TIMER2 confirm the CLOCK SET and adjust ifnecessary. Then set TIMER1 and TIMER2. SLEEP SLEEP sets the sleep time. A CTION CH CH VOL VOL Press to select SLEEP. Press to select the desired sleep time.To turn off the timer sel...
Page 33 - OFF TIME; ENTER CHANNEL
33 TIMER Press to select OFF TIME. Press to set hours AM or PM. Press to move to minutes position. Press to set minutes. OFF TIME Set the time of day. 1 2 A CTION CH CH VOL VOL A CTION CH CH VOL VOL A CTION CH CH VOL VOL A CTION CH CH VOL VOL ENTER CHANNEL 1 2 NO YES Press to select ENTER CHANNEL. P...
Page 34 - CLOCK SET; TIME
34 CLOCK SET 1 A CTION CH CH VOL VOL Press to select CLOCK SET. Press to enter. CLOCK SET sets the present time. This is necessary to operate the TIMER features. 2 A CTION CH CH VOL VOL Press to set hours AM or PM. TIME Set the time of day. TIMER SLEEP TIMER1 TIMER2 CLOCK SET PRESS ACTION FOR MAIN M...
Page 35 - LOCK Feature; CREATE CODE FIRST; CODE
35 LOCK Feature CREATECODE FIRST LOCK PRESS ACTION FOR MAIN MENU 1 2 3 4 5 6 7 8 0 9 After entering your secret code for the first time, theonscreen display will change to ENTER CODE. Use the remote numeric keypad to enter a four-digitsecret code. While entering a code, by pressing the up or down bu...
Page 39 - Canadian English
39 Canadian English The V-CHIP used in this TV model allows you to block various types of movies and television programs based on the tworating systems used in Canada. PIP will also be blocked automatically. CANADIAN ENGLISH RATINGS CHART E Exempt - Exempt programming includes: news, sports, documen...
Page 40 - Canadian French
40 Canadian French The V-CHIP used in this TV model also lets you block or unblock Canadian French programs according to various ratingscategories. PIP will also be blocked automatically. 1 A CTION CH CH VOL VOL Press to select CANADIAN FRENCH ON or OFF. ON OFF Press to select CANADIAN FRENCH. CANAD...
Page 41 - Blocking Message; Split Screen Blocking Message
41 Blocking Message If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audiowill be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, alllocks and rating blocks are disabled ...
Page 42 - Picture in Picture Operation; Basic PIP Operation; SWAP
42 Picture in Picture Operation This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at thesame time with or without an external video source such as a VCR, cable box, etc. Basic PIP Operation 1 Press the PIP button on the remote con...
Page 43 - Freeze; Move
43 Picture in Picture Operation PIP MIN, PIP MAX Freeze These features are used to size PIP Frame. Press PIP MIN REW or PIP MAX FF to size the PIP Frame. During PIP operation this feature is used to stop action in PIP frame. PIP MIN REW PIP MAX FF FREEZE TV/VCR Press FREEZE TV/VCR again to continue ...
Page 44 - Split Screen; Splitting the screen; Freezing pictures
44 This feature lets you watch two different channels side by side with or without an external video source.The audio is from the Main picture only (left side).Split screen enables you to search other channels on the right screen or check video recording status. Split Screen Notes: (1) Sound from th...
Page 45 - Changing the channels for the Split Screen; Viewing Videos; Searching the other channels
45 Split Screen Changing the channels for the Split Screen Swapping left and right screens Changing the channels for the Main Picture Select channels for the Main Picture by pressing CH CH or use the remote control numeric keypad. Viewing Videos While Split screen is displayed, press TV/VIDEO to swi...
Page 46 - ASPECT Controls
46 ASPECT Controls The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema formatpicture. ASPECT button The aspect mode changes each time the ASPECT button is pressed. Notes: (1) For a 480p signal input during component input signal mode, the m...
Page 47 - Operating peripheral equipment using the remote control; Programming The Illuminated Remote Control Using Access Codes
47 Operating peripheral equipment using the remote control Programming The Illuminated Remote Control Using Access Codes The Universal Remote Control can be programmed to operate many manufacturers’ components, using the componentfunction buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow...
Page 48 - Programming Without A Code
48 Programming Without A Code (When the code is not known) This procedure searches all codes and is called the “sequence method.” 1 Confirm that the external component is plugged in and on. 2 Turn the component off. 3 TV DTV CBL AUX DVD VCR DBS RCVR 4 POWER + A CTION CH CH VOL VOL Press POWER and AC...
Page 49 - Infrared Codes Index; Infrared Remote Codes for Specific Components; Codes for VCR
49 Operating peripheral equipment using the remote control The remote control is capable of operating many brands of peripheral equipment. Refer to pages 50 and 51 for programming procedures. Note: The remote control memory is limited and therefore some models may not operate. The remote control is ...
Page 50 - Codes for Personal Video Recorders; Codes for CD; Codes for Cassette Deck
50 Brand Code Panasonic Replay 100 Philips Tivo 101 Sony Tivo 102 VCR Codes for Personal Video Recorders Brand Code Denon 100 Ferguson 101 JVC 109 Mitsubishi 105 Nordmende 101 Panasonic 100 Philips 103 Pioneer 102 RCA 101 Codes for DVD DVD Brand Code Saba 101 Samsung 110 Sharp 108 Sony 104 Technics ...
Page 51 - Codes for Receivers; Codes for Cable Box; Codes for DBS
51 Brand Code Admiral 120 Aiwa 125, 126 Denon 134, 135, 136 Fisher 104 Garrard 113 Harman Kardon 115, 123 Jensen 129 JVC 132, 133 Kenwood 100, 108 Magnavox 127 Marantz 124 Mclntosh 116 Nakamichi 106 Onkyo 109, 114 Codes for Receivers Brand Code Optimus 103, 127, 130, 131 Panasonic 118, 119, 121 Phil...
Page 52 - Mode Operational Key Chart
52 Operating peripheral equipment using the remote control Mode Operational Key Chart This chart defines which keys that are operational after programming (if needed), while in the selected remote controlmode TV, DTV, CABLE, DBS, VCR, DVD ...etc. KEY NAME TV MODE DTV MODE CABLE MODE DBS MODE POWER P...
Page 54 - Manual de instrucciones; Precauciones relacionadas con el uso de las pilas; Instalación de las pilas en el control remoto; Conexión de la antena
54 Manual de instrucciones [Resumen] Precauciones relacionadas con el uso de las pilas La instalación incorrecta de las pilas puede causar fugas en lasmismas y corrosión, lo que dañará el control remoto. Tenga en cuenta las precauciones siguientes: 1. Las pilas deberán sustituirse siempre en pares. ...
Page 55 - Conexión/desconexión de la alimentación; Conexión del enchufe a un tomacorriente; Cómo conectar la alimentación
55 Conexión/desconexión de la alimentación Conexión del enchufe a un tomacorriente Nota: Los tipos de los enchufes principales cambian segúnlos países. Por lo tanto, el enchufe de alimentaciónmostrado a la izquierda tal vez no sea igual al tipo deenchufe de su aparato. Presione el interruptor POWER ...
Page 56 - Confirmación; VHF y UHF
56 INPUT OUTPUT S-VIDEO VIDEO L-AUDIO-R INPUT 4 ACTION TV/VIDEO VOLUME HPJ CHANNEL S-VIDEO VIDEO L-AUDIO-R INPUT 4 ACTION TV/VIDEO VOLUME HPJ CHANNEL A CTION DTV AUX DVD VCR DBS RCVR CH VOL VOL SAP M UT E ASPE CT TV/VIDEO LIG H T POWER CBL TV A la entrada de antena TERMINAL DE ANTENA EN EL PANELPOST...
Page 57 - Operaciones básicas con menús; Para volver a MANÚ principal: Para volver a la pantalla anterior:; Para finalizar los ajustes:
57 Operaciones básicas con menús 1 A CTION CH CH VOL VOL Presione para visualizar la pantalla demenú. Presione para seleccionar el icono demenú deseado.Presione para entrar en campo del menúsecundario. 2 Presione para seleccionar la función demenú secundario deseada.Presione para seleccionar o ajust...
Page 59 - PROGRAMA AUTOMÁTICO; Selección de MODO; PROGRAMA MANUAL
59 PROGRAMA AUTOMÁTICO A CTION CH CH VOL VOL Para programar automáticamente todos los canales con una señal. Selección de MODO Para seleccionar CABLE o TV. A CTION CH CH VOL VOL PROGRAMA MANUAL Para agregar o eliminar canales manualmente. A CTION CH CH VOL VOL 1
Page 60 - Control remoto iluminado; Ubicación de los controles
60 Control remoto iluminado Ubicación de los controles Botón de la alimentación Púlselo para encender o apagar el televisor (consulte la página 13). Nota: El cable de la alimentación del televisor deberá enchufarse primero al tomacorriente, y el televisor encenderse luego conel interruptor POWER (mo...
Page 62 - Troubleshooting Chart; Cleaning
62 To ensure continued excellent performance by this product, periodic cleaning is recommended. Troubleshooting Chart Before calling for service, determine the symptoms and follow suggested solutions. AUDIO VIDEO Solutions Symptoms Intermittent Remote Control Operation Cleaning Snowy Video Multiple ...
Page 63 - Specifications
63 AV INPUT 1- 4 VIDEO 1.0 Vp-p (75 Ω ) (Phono Jack Type) S-VIDEO Y : 1.0 Vp-p (75 Ω ), C : 0.286 Vp-p (75 Ω ) (Mini DIN 4-pin) AUDIO L-R 0.5 Vrms (Phono Jack Type × 2) AV PROG. OUT VIDEO 1.0 Vp-p (75 Ω ) (Phono Jack Type) AUDIO L-R 0.5 Vrms (Phono Jack Type × 2) TO AUDIO AMP AUDIO L-R 0.5 Vrms (Pho...
