Oregon Scientific atc-2k - Manual

Page 2 - Oregon Scientific ATC-2K

Oregon Scientific ATC-2K I . Camera Precautions• Waterproof FeatureII . Technical Specifications III . Computer System Requirements IV . Camera Description V . Camera Mounting Description VI . Quick Start• Battery Installation • Turning On/Off the Camera • Inserting/Removing the SD Card• Taking Vide...

Page 3 - I) Camera Precautions; Notice the following guidelines when using your camera.; Waterproof Feature

I) Camera Precautions Notice the following guidelines when using your camera. • ATC-2K is not shock-proof. You should avoid dropping it. • For your safety, do not press the buttons on the camera during sports activities. • Do not place the camera in a damp or dusty location for extended periods of t...

Page 4 - II) Technical Specifications

Step 2: Add one extra o-ring for more protection. Step 3: Replace the cover. Water may get inside the camera if the battery cover is not firmlyclosed. • If the camera gets wet, wipe the water off as soon as possible with a dry cloth.• Other camera accessories are not waterproof. Add one extra o-ring...

Page 5 - III) Computer System Requirements; Minimum System Requirements; • Pentium III 800 MHz or higher; IV) Camera Description

III) Computer System Requirements Minimum System Requirements • Pentium III 800 MHz or higher • Windows XP, Windows 2000• 128 MB RAM• 800 MB Free hard disk space • SVGA 800 x 600 resolution video support (32 bit)• 16 bit Windows compatible sound device * In some cases, the frame rate may be automati...

Page 6 - V) Camera Mounting Description; Fixing the position of the camera

17. LCD display18. ON/OFF & Enter button19. Movie shutter button20. Menu button21. Microphone22. Mini-USB port23. AV port24. SD card slot25. SD card (not included)26. Battery door27. Batteries (not included) 8 7 V) Camera Mounting Description The camera can be mounted in a number of ways using t...

Page 7 - Mounting the camera using the velcro strap:; Mounting the camera using the handlebar grip:

Mounting the camera using the velcro strap: 1. Attach the rubberized patch to the bottom of the helmet grip.2+3. Place the helmet grip on the helmet, and thread the velcro strap through the helmet grip. 4. Secure the velcro strap by fastening it through the helmet vents. 5. Slide the camera into the...

Page 8 - Press and hold the for 2 seconds (two beeping; Inserting/Removing the SD memory Card

d) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries. Only batteries of the same or equivalent type as recommended are to be used. e) Non-rechargeable batteries are not to be recharged.f) Rechargeable batteries are to be removed from the camera before being charg...

Page 9 - Taking Video Footage

d. The card and the data may be damaged if the SD card is inserted or removed while the camera is still on. Taking Video Footage 1. Aim at the subject you want to shoot.2. Press the 'Movie shutter button' to start recording (one beeping sound). The time elapsed will be shown on the LCD display. 3. P...

Page 10 - The different mode icons are shown in the table below.; Resolution; although the picture quality is lower.

Icon Title Description 15 16 High resolution (640x480 pixels) Medium resolution (320x240 pixels) Low resolution (160x120 pixels) Sound Delete the last video footage Delete all video footage Date and Time 30 frames per second 15 frames per second Low battery SD card Large video format/ less storage c...

Page 11 - Sound Recording; Repeat these two steps to individually delete your files.

17 18 VGA Item Picture size fps VGA QVGA QVGA QQVGA QQVGA 640 X 480 pixel 320 X 240 pixel 160 X 120 pixel 30 15 30 15 30 15 Sound Recording When the sound icon is flashing, the “ON” will be shown onscreen. “ON” means recording sound during filming. Press the'Movie shutter button' (one beeping sound)...

Page 12 - Delete All Video Footage; It may take a few minutes to delete multiple files at one time.; Setting the Year; Press the 'Movie shutter button' to adjust the last digit of the; Setting the Month

19 Delete All Video Footage To delete all video footage stored in your camera, press the Menu buttonuntil the LCD displays . Press the Enter button to confirm. Note: It may take a few minutes to delete multiple files at one time. Setting Date/Time (Clock Set) Shift to the Date icon in the Menu mode ...

Page 13 - SD Memory Card; If there is an error on the SD memory card, the SD card icon and the; Available Recording Time

SD Memory Card In this unit, you can use SD Memory Cards which have storage capacity ofbetween 8MB to 2GB.To use a SD memory card, turn off the ATC-2K and insert the SD memorycard. When the camera is turned on again the SD card icon will be displayedon the LCD.The remaining time will also be display...

Page 14 - VIII) Connecting to PC; is connected to your PC.; Removable disk; Forward

24 VIII) Connecting to PC You can acquire recorded video footage from a PC byconnecting the ATC-2K to the PC. Connect your camerato your PC using the USB cable. This enables you todownload your video footage to your PC.1. Turn on the ATC-2K. 2. Connect the ATC-2K to a PC via the USB cable.3. “PC” ap...

Page 15 - Before contacting an authorized service center at

I can't capture the video footage -Make sure there is enough space on the internal memory of ATC-2K or theSD card; the display will tell you how much time there is left for videorecording.-Make sure the SD card is not locked with the Write-Protect switch if youhave inserted the SD card. The letters ...

Page 16 - Note; Further Help; with any problems and/or

Note Further Help We make every effort to ensure the accuracy and appropriateness of theinformation provided on our products. However, errors can sometimes occur.We believe it is important for us to stand behind our products and weencourage you to email us at [email protected], or call our Cu...

Oregon Scientific atc-2k - Manual

Table of Contents:

Summary

Other Oregon Scientific Models