Oreck TEK 100 - Manual - manualsarea.com

Page 2 - WARNING; To reduce the risk of fire,; IMPORTANT; SAVE THESE INSTRUCTIONS; Household Use Only

When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury: IMPORTANT SAFETY INSTRUCTIONS • Do not use outdoors or on wet surfaces. • Do...

Page 3 - Safety Warning

Safety Warning 1. Be sure to use the product in compliance with the contents of this manual, and use approved Oreck replacement parts. 2. After unpacking, make sure that the appliance is intact with no visible signs of damage caused during shipping. If damage has occurred, do not use this product. T...

Page 4 - Warranty

3 Warranty ORECK MANUFACTURING COMPANY: (ORECK gives you the following limited warranty for this product only if it was originally purchased for use, not resale, from ORECK or an ORECK Authorized Retail Dealer.) ORECK will repair or replace, free of charge, to the original purchaser, any part which ...

Page 5 - Parts & Accessories List

Parts & Accessories List 1. Handle2. Upholstery brush3. Crevice tool4. Accessory hook5. Handle button6. Battery release button7. Battery compartment8. Power button9. Carry handle10. Dirt Cup11. Roller brush release button12. Roller brush13. Dirt cup release button 4 1 2 3 4 5 6 7 8 9 10 11 12 2 ...

Page 6 - Assembly Instructions; Dirt Cup Assembly

Assembly Instructions Before assembling, please be sure that all parts and accessories are included by reviewing the Parts and Accessories List. Dirt Cup Assembly As is shown in the Figure below, place the toll bar of the dust barrel on the back of the unit, and press down the dirt cup. When the fro...

Page 7 - Assembly of roller Brush

Assembly Instructions Assembly of roller Brush As is shown in the figure below, carefully insert the roller brush into the unit, making sure to align within the specific guide slots and ensuring electric contacts are fully aligned. Assembly of the Handle As shown below, pressing the handle release b...

Page 8 - Operation

Assembly Instructions Operation 1. It is necessary for the rechargeable battery to be fully charged prior to use. 2. The charger is uniquely designed for the rechargeable Ni-MH battery, rating: Input: 120V, 60 Hz, 50mA; Output: 9V DC, 280Ma; Class: 2 3. After inserting the plug of the charger into t...

Page 9 - Accessory Items

Assembly Instructions Accessory Items Included with this unit are two accessory items: a crevice tool and upholstery brush. A) Crevice Tool Shown below, the crevice tool is attached for cleaning in tight spaces. B) Upholstery Brush With the crevice tool still attached, affix the upholstery brush to ...

Page 10 - Maintenance

Maintenance 1. Dirt Cup filter After emptying the dirt cup as described above, the filter can also be cleaned at the same time. By grasping the filter screen guard in one hand, use the opposite hand to rotate the handle as indicated by the arrow direction shown on the top of the filter. Once removed...

Page 11 - Troubleshooting

Troubleshooting Problem The unit does not work or turn on. roller brush is not working The indicator lamp(red) does not work when charging Cause 1. The battery has been inserted incorrectly 2. The battery has not been charged 1. Roller brush has debris wrapped around it. 1. The power cord is not plu...

Page 12 - Discarding the Vacuum

©2009 Oreck Holdings, LLC. All rights reserved. All word marks, logos, product configurations, and registered trademarks are owned and used under the authority of Oreck Holdings, LLC. Printed in America 75851-01 REV A 8/09 ECN# R-9480 Discarding the Vacuum Remove the batteries by cutting the connect...

Oreck TEK 100 - Manual

Table of Contents:

Summary

Other Oreck Models