Page 2 - WARNING; IMPORTANT; SAVE THESE INSTRUCTIONS; Household Use Only
When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER WARNING To reduce the risk of fire, electric shock, or injury: IMPORTANT SAFETY INSTRUCTIONS • Do not use outdoors or on wet surfaces.• Do ...
Page 3 - Warranty
2 Warranty ORECK MANUFACTURING COMPANY: (ORECK gives you the following limited warrantyfor this product only if it was originally purchased for use, not resale, from ORECK or anORECK Authorized Retail Dealer.) ORECK will repair or replace, free of charge, to the original purchaser, any part which is...
Page 4 - Assembly
3 Assembly Model QS110 Series 1. Main housing 2. Hand held vacuum 3. Power head 4. Dirt Cup 5. ON/OFF handle switch 6. Handle control button 7. Release button for hand held vacuum 8. Charging socket 9. Hand held vacuum ON/OFF switch 10. Charging lamp 11. Release button for dirt cup 12. Dust filter (...
Page 5 - Vacuuming; Operating Instructions
4 Start-Up Instructions The box should include (a) Main housing ( fig. 1) (b) Power head ( fig. 1) (c) Adapter (power supply/charger)(d) User’s Guide Fig 1. Insert the power head into theair intake of the main unit. Charging the Unit Fig 2. Before charging, make sureboth switches are in the “OFF”pos...
Page 6 - Emptying the Dirt Cup
5 Combining/DetachingHand Vac Fig. 5 To remove the hand held unit,push the release button andpull the hand held unit outward. Fig. 6 To replace the hand held unit,insert the air intake of the handheld unit into the main housing(at the base of the unit). Pushthe hand held unit back againstthe back of...
Page 7 - Cleaning the Dust Filter; Power Brush; Storing the Vacuum
12 10 Operating Instructions Cleaning the Dust Filter Fig. 9 Empty dirt cup. Fig. 10 Remove the filter frame from the dust filter. Fig. 11 Wash the filter in warm soapy water, using a soft brush if necessary. Dry the filter completely before replacing itinto the filter frame and dirtcup. Replace the...
Page 8 - Troubleshooting Guide
What happens if the red charging indicatoris not lit while charging? Suction power is not sufficient. Running time is not sufficient. Machine does not stop when switched off. Brush does not work while operating. Hand held unit works, but the stick broomdoes not. 1. Make sure the adapter plug and soc...