Oreck SWSTEAM - Manuals

5 E N G L I S H Operation continued Assembling the Handle Align the connector tab at the bottom of the Grab-It & Steam-It™ handle with the receiving port on top of the unit. Insert until a “snap” is heard. Snap cord assembly into the cord clip located on the back of the Grab-It & Steam-It™ h...

6 E N G L I S H Operation continued Power Broom Operation: Press the “SWEEP ON/OFF” button to activate the brush roll. NOTE: The power broom can operate on hard floors with or without the steam mop pad holder attached. NOTE: Remove steam mop pad holder when using on low pile carpeting. To empty the ...

8 E N G L I S H Steam Mop Operation: continued Press the “STEAM” button. The “STEAM HEATING” light will come on. Rotate the steam selection button to choose the optimal steam level, right for higher, left for lower. (Refer to page 9 for suggested settings) When the “STEAM READY” light comes on, pres...

9 E N G L I S H WARNING: Unplug cord from electrical outlet before servicing. Brushroll Maintenance At least once a month, check for and remove excessive lint, string or hair from the revolving brushroll. A little preventative maintenance will keep your Sweep and Steam looking new and will ensure co...

10 E N G L I S H Replacement Parts Parts What to do Problem Check Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center. Unit has no power . Very low or...

11 E N G L I S H Warranty ORECK MANUFACTURING COMPANY: (Oreck Manufacturing Company gives you the following limited warranty for this product only if it was originally purchased for residential use, not resale, from Oreck or an Oreck Authorized Retail Dealer.) Oreck will repair or replace, free of c...