Page 2 - Introducing the New Style of Loop Control; Only One CPU Unit Needed; Sequence control; PCMIX = 7.4 LD or OUT executed in 40 ns; Loop control; Integrated Loop Control and Sequence Control; Sequence Control Engine; CPU Unit; Execute; Execute PID Control for
3 Introducing the New Style of Loop Control Advanced controller functions integrated with the same CJ-series functionality and high-speed capabilities Duct Duct 90 mm high S82K G3J J7AN Power supply SSR Contactor The same level of high-speed processing Digital Controller High-speed processing(Exampl...
Page 3 - Disturbance Overshoot Adjustment; Optimum Tuning to Suit the Application; Fine Tuning; Sequence control programs; : Programming with function blocks to suit the application.; System configuration; : Choose and combine functions from a broad selection of I/O Units.; Example: Program Control; System Configuration
5 New Algorithm Further Enhances Control Stability Disturbance Overshoot Adjustment Optimum Tuning to Suit the Application Fine Tuning Disturbance Disturbance generated Time required to stabilize Overshoot Conventional PID gain adjustment Using the Disturbance Overshoot Adjustment function Longer ti...
Page 4 - Industrial Furnace; Applications; Providing Solutions to Other Problems
Sterilization and Disinfection of Pharmaceuticals, Food and Beverages Loop-control CPU Unit Loop-control CPU Unit N 2 atmosphere Solder Workpiece Conveyor NS-series PT NS-series PT Heater Temperaturesensor SCR Temperature Thyristor Pressure Control outputs Control outputs Logging Trend Data (monitor...
Page 5 - Loop Control Machines and Product Variations; Easy; Model Selection; System Configuration Example
7 Process Loop Control Machines and Product Variations High-speed and highly reliable (duplex) Easy Controlling analog quantities CS1D-seriesProcess-control CPU Unit (See note 2.) CS-series/CS1D-SLoop Control Board (See note 2.) CJ1G-CPU4 P CJ-series Loop-control CPU Unit Processing facilities • Che...
Page 6 - Peripheral Devices; Input Devices; Temperature Controllers; Multi-channel Power Controller
8 Peripheral Devices Input Devices Input Devices Output Devices Output Devices E52-series Temperature Controllers ES1/ES1B-series Infrared Thermosensors G3PF Solid-state Relay with Built-in Current Transformer (CT) Model Structure Example: E52-CA15A D:3.2 2M Plenty of Variation to Suit an Extensive ...
Page 7 - New Products; Process Analog I/O Unit
9 New Products CJ1W-AD04U Process Analog I/O Unit (General-purpose Unit with Fully Universal Inputs) CJ1W-PH41U Process Analog I/O Unit (High-resolution Unit with Fully Universal Inputs) Fully Universal Inputs, Including Thermocouple Inputs, Platinum Resistance Thermometer Inputs, and DC/Voltage Inp...
Page 8 - Loop-control CPU Units; Loop-control CPU Units; Loop-control CPU Units
10 Loop-control CPU Units Loop-control CPU Units Loop-control CPU Units Loop-control CPU Units Loop Controller Element Specifications Model CPU Unit element Loop Controller I/O capacity Program capacity Data memory capacity Programming software Number of function blocks Programming software CJ1G-CPU...
Page 9 - Loop Controller Element Specifications
11 Loop-control CPU Units Loop Controller Element Specifications Loop Controller Element Specifications Item Specifications Model CJ1G-CPU42P CJ1G-CPU43/44/45P(-GTC) Operation method Function block method Loop Controller element LCB01 LCB03 Function block analog operations Control and operation bloc...
Page 10 - System Common Block; System Common Block
12 List of Function Blocks System Common Block List of Function Blocks System Common Block Control Blocks Note: 1. The Function Blocks dealing with high-speed operation (operation cycle: 0.01, 0.02, and 0.05 seconds is possible). 2. Cannot be used with the CJ1G-CPU45P-GTC. Operation Blocks Type Bloc...
Page 11 - Sequence Control
13 List of Function Blocks Note: 1. The Function Blocks dealing with high-speed operation (operation cycle: 0.01, 0.02, and 0.05 seconds is possible). 2. Cannot be used with the CJ1G-CPU45P-GTC. Sequence Control Note: The Function Blocks dealing with high-speed operation (oper-ation cycle: 0.01, 0.0...
Page 12 - Software Specifications; Software Specifications
14 CX-Process Tool and Monitor Software Specifications CX-Process Tool and Monitor Software Specifications Item Specifications CX-Process Tool CX-Process Monitor Plus Name CX-Process CX-Process Monitor Plus Model number WS02-LCTC1-EV5 WS02-LCMC1-EV2 Applicable PLCs CS-series PLCsCJ-series PLCs Appli...
Page 13 - Connections to PLC
15 CX-Process Tool and Monitor Connections to PLC Note: The CX-Process functions that can be used depend on the version. For details, refer to the operation manuals (Cat. No.: W372-E1- @ and W373-E1- @ ). Note: 1. When using Windows Me, the CPU must be a Pentium 150 MHz or higher. 2. Peripheral Bus ...
Page 14 - Touch Panel Software; Touch Panel Software; Function Overview
16 Utility Software Touch Panel Software Utility Software Touch Panel Software ■ Face Plate Auto-Builder for NS Simply specify the CSV tag file created using the CX-Process Tool to automatically create a project constructed with a Face Plate for Loop-controlCPU Units for use with OMRON's NS-series P...
Page 15 - CPU Units; CPU Units
17 Dimensions CPU Units Dimensions CPU Units ■ Loop-control CPU Units CJ1G-CPU42PCJ1G-CPU43PCJ1G-CPU44PCJ1G-CPU45P(-GTC) ■ Process Input Units CJ1W-P @@@@ CONTROLLER CJ1G-CPU44P SYSMAC PROGRAMMABLE ERR/ALM RUN COMM INH PRPHL OPEN PERIPHERAL BUSY MCPWR PORT 65 69 73.9 2.7 2.7 90 LCB03 EXEC RDY INNER ...
Page 16 - Basic Configuration Units; Basic Configuration Units; CJ1 Loop Control Units
18 Ordering Information Basic Configuration Units Ordering Information Basic Configuration Units ■ CJ1 Loop Control Units ■ CJ1 CPU Units Product name Specifications Current consumption (A) Model Standards CPU Unit Loop Controller 5 V 24 V CJ1G Loop-control CPU Units Same as for CJ1G-CPU45H Number o...
Page 19 - Power Supply Units
21 Ordering Information Basic Configuration Units ■ Power Supply Units One Power Supply Unit is required for each Rack. Product name Power supply voltage Output capacity Options Model Standards 5-VDC output capacity 24-VDC output capacity Total power consump- tion 24-VDC service power supply RUN out...
Page 20 - CPU Unit
22 Ordering Information Basic Configuration Units ■ Connector Cables for Built-in I/O in CJ1M-CPU @ 2 CPU Unit The connector for built-in I/O in the CJ1M-CPU21/22/23 is not included. Purchase one of the connectors or connector cables in the following table separately. Product name Specifications Mod...
Page 22 - Programming Devices
24 Ordering Information Programming Devices Programming Devices Note: Site licenses are also available for users that need to use the CX-One on many computers. Ask your OMRON representative for details.When purchasing the DVD format, verify the computer model and DVD drive specifications before purc...
Page 23 - Input Units
25 Ordering Information Basic I/O Units Basic I/O Units ■ Input Units Note: Connectors are not provided with these connector models. Either purchase one of the following 40-pin connectors, or use an OMRON XW2 @ Connector-Terminal Block Conversion Unit or a G7 @ I/O Relay Terminal. Unit classi- fica-...
Page 24 - Output Units
26 Ordering Information Basic I/O Units ■ Output Units Note: Connectors are not provided with these connector models. Either purchase one of the following 40-pin connectors, or use an OMRON XW2 @ Connector-Terminal Block Conversion Unit or a G7 @ I/O Relay Terminal. Unit classi- fica- tion Product n...
Page 25 - Applicable Connectors
27 Ordering Information Basic I/O Units ■ I/O Units Note: 1. Connectors are not provided with these connector models. Either purchase one of the following 40-pin Connectors, or use an OMRONXW2 @ Connector-Terminal Block Conversion Unit or a G7 @ I/O Relay Terminal. 2. Connectors are not provided wit...
Page 26 - Isolated-type Units with Fully Universal Inputs
28 Ordering Information Special I/O Units Special I/O Units ■ Process I/O Units Isolated-type Units with Fully Universal Inputs Note: 1. Do not connect a Relay Contact Output Unit in the same CPU Rack or Expansion Rack as the CJ1W-PH41U Isolated-type UniversalInput Unit. 2. L and − 100 ° C or less f...
Page 27 - Isolated-type Thermocouple Input Units; Isolated-type Resistance Thermometer Input Units
29 Ordering Information Special I/O Units Isolated-type Thermocouple Input Units Note: 1. The accuracy depends on the sensors used and the measurement temperatures. For details, refer to the user’s manual. 2. This is for an external power supply, and not for internal current consumption. 3. L and − ...
Page 28 - Analog Input Units; Analog Output Units
30 Ordering Information Special I/O Units ■ Analog I/O Units Analog Input Units Note: 1. The resolution and conversion speed cannot be set independently. If the resolution is set to 1/4,000, then the conversion speed will be1 ms/point. 2. At 23 ± 2 ° C 3. For products manufactured from August 2007 o...
Page 29 - Temperature Control Unit
31 Ordering Information Temperature Control Unit Analog I/O Units Note: The resolution and conversion speed cannot be set independently. If the resolution is set to 1/4,000, then the conversion speed will be 1 ms/point. Temperature Control Unit Unit classi- fica- tion Product name I/O points Signal ...
Page 30 - CPU Bus Units; Controller Link Units; Controller Link Units, New Models; Repeater Units
32 Ordering Information CPU Bus Units CPU Bus Units ■ Controller Link Units Controller Link Units, New Models Controller Link Units, Old Models New models are fully compatible with old models and provide enhanced functionality, such as an increase in the number of send words from 1,000 to 4,000 word...
Page 31 - Serial Communications Units
33 Ordering Information Serial Communications Units Serial Communications Units Note: 1. The Serial Gateway function is enabled only for Serial Communications Units of unit version 1.2 and later. 2. The no-protocol function is enabled only for Serial Communications Units of unit version 1.2 and late...
Page 32 - DeviceNet Unit
34 Ordering Information DeviceNet Unit DeviceNet Unit CompoNet Master Unit CompoBus/S Master Unit Unit classi- fica- tion Product name Specifications Communications type No. of unit numbers allocated Current consump- tion (A) Model Standards 5 V 24 V CJ1 CPU Bus Units DeviceNet Unit Functions as mas...
Page 33 - ID Sensor Units
35 Ordering Information ID Sensor Units ID Sensor Units Note: 1. To use a V680-H01 Antenna, refer to the V680 Series RFID System Catalog (Cat. No. Q151). 2. Specifications subject to change without notice. SYSMAC SPU (High-speed Data Storage Unit) Unit classi- fica- tion Product name Specifications ...
Page 34 - NS-series Programmable Terminals
36 Ordering Information NS-series Programmable Terminals NS-series Programmable Terminals ■ NS-Runtime Note: A hardware key (USB dongle) is required to run NS-Runtime. Model name Specifications Model number Standards Ethernet Case color NS5-V2 5.7-inch STN monochrome, 320 x 240 dots No Ivory NS5-MQ0...
Page 35 - International Standards; Applicable Standards; Low Voltage Directive
37 Ordering Information Ordering Information Ordering Information International Standards • The standards indicated in the “Standards” column are those cur-rent for UL, CSA, cULus, cUL, NK, and Lloyd standards and ECDirectives as of the end of January 2008. The standards are abbre-viated as follows:...
Page 36 - Read and Understand this Catalog
Note: Do not use this document to operate the Unit. Printed in Japan0308(1104) Authorized Distributor: In the interest of product improvement,specifications are subject to change without notice. Read and Understand this Catalog Please read and understand this catalog before purchasing the product. P...
