Omnitron Systems 8249-0 - Manual
Omnitron Systems 8249-0 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
iConverter
®
Wall-Mounting Kit
User Instructions
Description and Inventory
The 8249-0
iConverter
Wall-Mounting kit was
designed to attach one
iConverter
1-Module or 2-
Module chassis to a wall, backboard or other flat
surface. The 8249-0 kit should include the following
hardware:
(2)
“L” shaped brackets
(4)
Flat head screws, 4-40, 1/4 inch
(4)
Wall mounting screws
Warning:
Before installing an
iConverter
chassis, make sure to
remove it from its power adapter. Make sure to
disconnect the power adapter from the AC line power.
Mounting:
1. Align the screw threads of the
iConverter
chassis
with the holes in the bracket.
2. Attach one “L” bracket on each side of the unit
using the 4-40 flat head screws enclosed with the kit.
3. The
iConverter
with the tab brackets should look
like the picture below (Fig. 1).
4. Attach unit to the desired surface using the
appropriate screws.
5. Follow any installation instructions in the
iConverter
User Manual.
Technical Support:
For help with this product,
contact our Tech. Support:
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address: Omnitron Systems
040-08249-001C 12/03
Wall Mounting Bracket
Fig. 1 1-Module Chassis with
Wall Mounting Kit
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
