Omnitron Systems 4389 - Manual
Omnitron Systems 4389 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Hot Removal of Power Supplies:
- Page 3 – FlexPoint; Powered Chassis; GENERAL DESCRIPTION; POWER SUPPLY REPLACEMENT
- Page 4 – CONTROLS AND INDICATORS; Function; SITE PREPARATION REQUIREMENTS; Tools and Equipment Required:; Site Preparation Requirements; WARNING REGARDING EARTHING GROUND:
Omnitron Systems Technology, Inc.
140 Technology Drive #500 Irvine, CA 92618
(949) 250-6510; Fax: (949) 250-6514
FlexPoint
TM
Powered Chassis
48VDC Power-Redundant
14-Module Chassis
User’s Manual
8
Omnitron Systems Technology, Inc.
Hot Attachment of Power Supplies:
1. Unpack the power supply carefully. Inspect for any damages. If any damage
is observed, do not use the power supply and call (949) 250-6510 to report
the damage immediately and request a replacement unit.
2. Attach the power supply to the chassis and reconnect the 48VDC power source
to the FlexPoint power supply.
3. Locate the 48VDC circuit breaker and switch the circuit breaker to the ON
position.
4. Turn the FlexPoint Chassis power supply ON.
5. Observe the LED in the front of the chassis indicating that the power has been
restored.
SPECIFICATIONS
Indicators:
Power ON:
LED (2), Yellow, power applied
Dimensions / Weight:
W:19.0"xD:7.0"xH:3.5" / 9 lb.
Power:
48VDC / 3.0 Amps (for model 4386)
2ea. 48VDC / 3.0 Amps (for model 4385)
Environmental:
Temperature:
0 to 50 degrees C
Humidity:
5-95% (non-condensing)
TECHNICAL SUPPORT
If you encounter problems in installing this product, contact Omnitron Tech Support:
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
140 Technology Drive, #500
Irvine, CA 92618, USA
E-mail:
URL:
http://www.omnitron-systems.com
040-04385-001B 11/07
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Omnitron Systems Technology, Inc. It is very strongly recommended that a replacement power supply unit be installedas soon as possible in order to prevent overheating of the chassis unit. THE POWER SUPPLIES ARE HOT-SWAPPABLE AND CAN BE REPLACEDWITHOUT SHUTTING THE NETWORK DOWN. HOWEVER, WHEN REMOV...
Omnitron Systems Technology, Inc.3 FlexPoint TM Powered Chassis User ’s Manual GENERAL DESCRIPTION The FlexPoint TM Powered Chassis is a chassis capable of holding up to 14 FlexPoint TM media converter modules. It is equipped with two power supplies in a power-redundant configuration. This User’s Ma...
4 Omnitron Systems Technology, Inc. CONTROLS AND INDICATORS LEDs Display: The Powered Chassis features two LEDs on the left front of the chassis, theseLEDs display the status of the two power supplies. Function Color/State Description Top LED Yellow / ON Power OK in right power supply Bottom LED Yel...
