Omnitron Systems 4Tx - Manual

iConverter

iConverter

®

4Tx

4-Port 10/100BASE-TX Managed Ethernet Switch

iConverter

The

iConverter

4Tx 10/100 Ethernet Switch module is a member

of the managed

iConverter

product family. The 4Tx provides a

compact 4-Port 10/100 Ethernet switch that is expandable
across the

iConverter

19-Module, 5-Module and 2-Module

c h a s s i s b a c k p l a n e s , a s w e l l a s b e i n g s u p p o r t e d a s a
standalone switch with the

iConverter

1-Module Chassis.

The

iConverter

4Tx UTP ports feature 10/100Mbps, Half or

Full-Duplex and auto-negotiation with both hardware and
software controls. Hardware control is available for two ports
while all four ports are under software control for these features.

RJ-45 crossover support eliminates need for a crossover cable
and facilitates connectivity to different types of network
equipment. The 4Tx crossover switch is supported on Port 1.
Ports 2, 3 and 4 support an automatic crossover detection
mode. The 4Tx also features two Ethernet backplane ports to
provide connectivity to adjacent modules for network expansion
and for in-band connectivity to an

iConverter

Network

Management Module.

4Tx enhanced features include Port VLAN which allows
complete control of traffic flow between a module’s ports, and
Port Access Control which incorporates remote enabling and
disabling of each individual port. The 4Tx supports reporting of
MIB statistics that are available for 32 variables per port, reporting
a w i d e r a n g e o f r e a l - t i m e p a c k e t s t a t i s t i c s t o p r o v i d e
performance and operational monitoring.

iConverter

4Tx modules are hot-swappable and can be mounted

in a 19-Module (2U high) or 5-Module (1U high) rack-mountable
chassis (19-inch or 23-inch) with any combination of redundant
AC, 24VDC or 48VDC power supplies. They can also be mounted
in a 2-Module AC or 18 to 60VDC powered chassis, or in a
1-Module AC/DC powered chassis.

„

The

iConverter

4Tx Managed Ethernet Switch supports

10BASE-T or 100BASE-TX on four UTP ports

„

Enhanced features include Port VLAN, Port Access
Control and MIB Statistics

„

Multiple 4Tx modules can be installed to expand the
port concentration in a single chassis

„

Supports Half or Full-Duplex and auto-negotiation

„

RJ-45 crossover support eliminates need for
different cables in connecting to various devices

„

Ethernet backplane ports for connectivity to adjacent
modules

„

M a n a g e m e n t i s a v a i l a b l e w i t h t h e a d d i t i o n o f a
management module to the chassis

„

SNMP management via

NetOutlook

™

provides real-time

p o r t a n d m o d u l e i n f o r m a t i o n , r e m o t e p a r a m e t e r
configuration and trap notification

„

Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX
specifications

„

Modules are hot-swappable in 19-Module, 5-Module,
2-Module or 1-Module chassis

„

Lifetime Warranty and free 24/7 Technical Support