Omnitron Systems 400FTD - Manual
Omnitron Systems 400FTD – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Applications
- Page 3 – GENERAL DESCRIPTION; STANDARD; Singlemode fiber, 110 Volt power supply; OmniRepeater; TM; Fiber to Desk Repeater; User’s Manual; OPERATION; Switches & Indicators; UTP
- Page 4 – Self Test Mode; FIBER; Tx
- Page 5 – DIAGNOSTIC FEATURES; Self Test; WARNING; Fiber Optic Media Test - 2 OmniRepeater 400FTD’s; Loopback Fiber Optic Media Test - Via Patch Panel
- Page 6 – INSTALLATION; Unpacking; damage should be noted and reported immediately.; SITE REQUIREMENTS; Power; CONFIGURATION; Normal; a. Turn off the terminal or printer being attached.; Fiber Installation Test Configurations; The OmniRepeater 400FTD supports several test configurations.; Loopback Fiber Optic Media Test - Via Patch Cable
Omnitron Systems Technology, Inc.
1
OmniRepeater
TM
400FTD
Systems AS400/3X
Fiber to Desk Repeater
User’s Manual
27 Mauchly #201, Irvine, CA 92618; (949) 250-6510, Fax: (949) 250-6514
Document #040-02900-001
12
Omnitron Systems Technology, Inc.
SPECIFICATIONS
n
Protocol:
IBM 5250 and 5250 Express for systems AS/400 and
Systems 34/36/38
n
Terminals:
3179, 3180, 3196, 3197, 3476, 3477, 5250, 5251,
5291, 5292, and compatibles
n
Printer’s Supported:
3262, 3812, 4214, 4224, 4234, 5219, 5224, 5225,
5226, 5262, and compatibles
n
Cable Types:
Fiber Optic:
Multi-mode glass fiber of sizes 50/125, 62.5/125, or
100/140 micron
STP:
Twinax female to DB-9 female
3 ft.
OST# 310-00012-000
6 ft.
OST# 310-00013-000
DB-15 female to DB-9 female
3 ft.
OST# 310-00014-000
6 ft.
OST# 310-00015-000
UTP:
Level 3 (EIA/TIA 568):
24 AWG solid copper 100 +/- 15 Ohms @ 1.0 Mhz;
7db per 1,000 ft. @ 1.0 Mhz (lower grade wiring at
shorter distances)
n
Data Rate:
1 Mbps +4%, -2%
n
Supported Distances:
Multi-mode fiber:
15,000 ft.
Singlemode fiber:
30,000 ft.
Port STP:
5,000 ft.
Port UTP:
3,000 ft.
n
Indicators:
Power:
Green LED
Test Mode:
Red LED
Link:
Green-Red LED
Port:
Green-Red LED
n
Physical Dimensions:
W:3.46”xD:2.83”xH:0.78”
n
Weight:
2 lbs.
n
Power Supply (External):
9 VDC @ 1.2A
n
Temperature:
Operating:
0° to 40°C
Storage:
-40° to 75°C
Humidity:
Up to 90% (non-condensing)
TECHNICAL SUPPORT
For assistance in installing this product, contact Omnitron’s Technical Support
Department.
Phone:
(949) 250-6510
Fax:
(949) 250-6514
Address:
Omnitron Systems Technology, Inc.
27 Mauchly #201
Irvine, CA 92618, USA
Email:
URL:
www.omnitron-systems.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Omnitron Systems Technology, Inc. SAFETY CONSIDERATIONS Warning The instructions in this User’s Manual are for use by qualified personnel only. To avoid electricalshock, do not perform any servicing of this unit or its accessories (such as power units) otherthan that contained in the operating ins...
Omnitron Systems Technology, Inc. 3 GENERAL DESCRIPTION The OmniRepeater 400FTD is a fourth generation IBM 5250 compatible activerepeater. The OmniRepeater 400FTD provides fiber-to-the-desktop, extending theapplicability of the 5250 protocol. Four models offer a selection of fiber (single ormultimod...
4 Omnitron Systems Technology, Inc. Both switches are placed in the down position at the factory. The following tableexplains the switch settings. In addition to the two switches there are four LED indicators in a 2x2 cluster.Refer to the drawings below. The meaning of the LEDs is shown on the cover...
