Omnitron Systems 8000-0 - Manual

Omnitron Systems 8000-0

Omnitron Systems 8000-0 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
Page: / 25

Table of Contents:

  • Page 2 – Table of Contents
  • Page 3 – OVERVIEW; The; IMPORTANT; equipment on a large
  • Page 4 – PORT STRUCTURE; Daisy Chain Port; Serial Console Port; Multi-Chassis Configuration; Only one NMM per chassis
  • Page 5 – NetOutlook Chassis View; Chassis Selection; iConverter; Ethernet Backplane Port
  • Page 8 – INSTALLATION PROCEDURE; Installing the Module and Connecting the UTP Cable (Section 3.3); CONFIGURING SWITCHES; Board Mounted Switches; Ethernet Crossover Switch; Verify the “Pwr” LED is ON (indicating the chassis is powered).
  • Page 9 – CONFIGURE THE MODULE VIA COMMAND LINE INTERFACE; Serial Connector Pin Outs; ENTER; IP
  • Page 11 – Setting IP and Control Preferences; Setting IP Parameters Manually
  • Page 12 – Setting IP Parameters as DHCP Client; Setting the Chassis Number and Name
  • Page 13 – Setting NMM Passwords
  • Page 14 – Setting SNMP Preferences; Setting SNMPv1/v2c Read and Write Community Names
  • Page 16 – Management Support; VLAN
  • Page 18 – Access the NMM Remotely; NetOutlook; NetOutlook Chassis View and Trap Log Screens; Accessing the NMM via Telnet; IP and Control
  • Page 19 – Updating the NMM Firmware via the Serial Console Port; Management Options
  • Page 20 – Updating the NMM Firmware via FTP; VERIFY OPERATION; LED Function
  • Page 21 – MODULE STATUS
  • Page 23 – NMM SPECIFICATIONS
  • Page 24 – TROUBLESHOOTING GUIDE; A. Confirm that the UTP cable is connected properly to the
Loading the manual

iConverter

®

Network Management Module

USER MANUAL

Release 3.4

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Table of Contents

Page 2 Table of Contents 1.0 Overview .................................................................................................................... 3 2.0 Port Structure ............................................................................................................. 4 2.1 Overview...

Page 3 - OVERVIEW; The; IMPORTANT; equipment on a large

1.0 OVERVIEW The iConverter ® Network Management Module (NMM) is the heart of the iConverter management system. It features a 32-bit, high performance RISC microprocessor executing a realtime operating system. Itsupports the SNMP and Telnet protocols and is capable of controlling up to 19 managed ch...

Page 4 - PORT STRUCTURE; Daisy Chain Port; Serial Console Port; Multi-Chassis Configuration; Only one NMM per chassis

2.0 PORT STRUCTURE 2.1 OVERVIEW The Network Management Module front panel provides the access to the Management ports. Managementcan be accessed through the serial port or the UTP port. The module features a backplane Ethernet port forconnectivity to adjacent modules. Serial Port Daisy Chain Port UT...

Other Omnitron Systems Models

All Omnitron Systems Other