OmniMount G363 - Manual
OmniMount G363 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Lift Top Glass S; helf; top; frame members
- Page 3 – holes should face towards the bottom of the Main Frame.
- Page 4 – Tighten all Hex Screws on table assembly securely.
8
OmniMount Systems, Inc.
8201 South 48th Street • Phoenix, AZ 85044-5355
www.omnimount.com
Thank you for purchasing an OmniMount product.
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation. OmniMount
Systems disclaims liability for any difficulties arising from the interpretation of information contained
in these instructions. If OmniMount products are used for purposes other than their original intent,
OmniMount, its distributors and retailers shall not be held responsible or liable for injuries or property
damage, direct, indirect, or consequential, which may arise from the inability to use this product safely,
properly, and in the manner for which it has been designed and manufactured. Warranty does not
apply to products which have been lost, damaged by misuse, abuse, or accident.
Step 10
Route your systems cables through Cable Ports and out through opening in rear
of Back Post.
P/N 1002697 Rev A 02/2005
Assembly Instructions
IMPORTANT: Consult your dealer if you have any questions regarding
the proper assembly of this product.
•
Three shelf video table
•
Adjustable center shelf
•
Ideal for large LCD/DLP, Plasma TV’s
•
Cable management
Stellar Video Table: G363
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Components: ID Description Qty. A Top Glass Shelf 1 B Middle/Bottom Glass Shelves 2 C Main Frame 1 D Back Post 1 E Main Support Legs 4 H Long Hex Head Screws 10 I Hex Screws 18 J Cross Bar Bracket 2 K Center Support Bracket 2 L Self Adhesive Pads 16 M End Caps 4 N Cable Port Covers 2 G Center Cros...
6 Step 7 Rock table to check that it is level and stable. For unstable condition, unscrew shortest Leveling Foot until table sits level. Peel Self Adhesive Pads (L) from backing paper, and apply to table assembly as indicated by the black dots, as shown in Fig. 7. Note: There should be 5 Adhesive pa...
4 Step 3 Install Main and Center Support Legs over brackets on the other side of Main Frame, as shown in Fig. 3. Loosely secure Support Legs to Main Frame with Hex Screws. Step 4 Attach Center Cross Bar (G) to Center Support Legs with Cross Bar Bracket (J) and Hex Screws, as shown in Fig. 4. Fig. 3 ...
