Nutone IMA-3033 Series Master Station - Manual

Nutone IMA-3033 Series Master Station

Nutone IMA-3033 Series Master Station – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – INSTALLATION
  • Page 3 – Wire Matching Chart
  • Page 4 – Mounting the Master Panel
  • Page 5 – Connecting Antenna; RADIO MEMORY CHANNEL SELECTION; DISABLING REMOTE STATION RADIO ON/OFF
  • Page 7 – Connecting the Transformers
  • Page 8 – Securing the Master Panel
  • Page 9 – SYSTEM OPERATING CONTROLS; Master Station Controls
  • Page 10 – Digital Clock; SETTING THE TIME; Operational Checkout
  • Page 11 – OPERATIONAL CHECKOUT; Diagnostic Tests
  • Page 12 – INSTALLER'S TROUBLESHOOTING GUIDE
  • Page 16 – Two Year Limited Warranty
Loading the manual

INSTALLATION

INSTRUCTIONS

RADIO-INTERCOM SYSTEM

MODEL: IMA-3303 Series Master Station

This booklet contains information for installing the Master

Station. All system wiring and rough-in frames should be
installed

before

mounting and wiring the master station.

Refer to the installation instructions packaged with the

rough-in frame for detailed wiring information.

For more

IMA-3303 SERIES SYSTEM
WIRING DIAGRAM

IMA-3303 SERIES REPRESENTATIVE WIRING ILLUSTRATION

USE THIS DIAGRAM FOR REFERENCE ONLY –

SEE IR-104 ROUGH-IN FRAME INSTALLATION

INSTRUCTIONS FOR DETAILED WIRING

detailed information on wiring and mounting other system
components (i.e. speakers, remote controls, etc.), refer to
the installation instructions packaged with each separate
component.

MODEL IMA-3303 SERIES

RADIO/INTERCOM MASTER

IN IR-104 ROUGH-IN FRAME

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INSTALLATION

2 Wiring Specifications NuTone IW-2: 22 GA. Twisted Pair. NuTone IWA-3: Flat Ribbon Type 3-wire, 22 GA. cable. NuTone S-143: 18 GA. 2-conductor insulated. No. 14/2: 120v, 60Hz Power Cable: Class 1. U.L. Listed(not supplied by NuTone). 14 GA.: Ground Wire (not supplied by NuTone). Speaker Wiring An i...

Page 3 - Wire Matching Chart

3 Wire Matching Chart NuTone has adopted the use of a 3-wire color-coded cable. If you are replacing an older model radio-intercom, use this chartto match the copper/center/silver designations of older wiringwith the blue/grey/red-stripe color-coded wire. Connecting the RemoteSpeaker Wiring NOTE: Al...

Page 4 - Mounting the Master Panel

4 FIGURE 7 FIGURE 8 FIGURE 9 FIGURE 10 INSTALLATION (Continued) Mounting the Master Panel 1. Refer to Figure 6. Use two (2) no. 6 x 3 ⁄ 8 " screws to attach mounting brackets to rough-in frame Using bottom set holes, make sure brackets are flush to wall or rough-inand screws are tight. 2. Refer ...

Other Nutone Models