Page 3 - Contents
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 3 Copyright © Nortel Networks Limited 2006 Contents How to get help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Overview . . . . . . . . . . . . . . . . . . . . . . . ...
Page 5 - Prerequisites
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 5 Copyright © Nortel Networks Limited 2006 Adding and configuring the Web Client Manager . . . . . . . . . . . . . . . . . . 135 Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Link to
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Finding the latest updates on the Nortel Web site The content of this documentation was current at the time the product was released. To check for updates to the latest documentati...
Page 9 - How to get help; Getting help from the Nortel web site; download software, documentation, and product bulletins; Getting help over the phone from a Nortel Solutions Center
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 How to get help This section explains how to get help for Nortel products and services. Getting help from the Nortel web site The best way to get technical support for Nortel produ...
Page 10 - Getting help from a specialist by using an Express Routing Code
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 10 Copyright © Nortel Networks Limited 2006 Getting help from a specialist by using an Express Routing Code To access some Nortel Technical Solutions Centers, you can use an Express Routing Code (ERC) to quickly route your call to a specialist in your ...
Page 11 - Overview; Figure 1 2-server network with redundant Ethernet switches
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Overview The MCS 2-server Sun Fire* V210 Solaris system is a small-scale version of the Multimedia Communication Portfolio (MCP) system, geared towards an environment with a maximu...
Page 12 - Figure 2 2-server network with single Ethernet switch
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 12 Copyright © Nortel Networks Limited 2006 Figure 2 2-server network with single Ethernet switch Figure 3 2-server network MAS Ad hoc audio conferencing with single Ethernet switch The rest of this document will refer to the example data in the figure...
Page 13 - Restrictions and limitations; The system supports a maximum of 250 subscribers.
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 13 Copyright © Nortel Networks Limited 2006 Figure 4 Example of 2-server Sun Fire V210 Solaris system configuration Restrictions and limitations The 2-server V210 Solaris system is non-redundant. Since redundancy is not b...
Page 14 - Refer to the
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 14 Copyright © Nortel Networks Limited 2006 MCS 5100 documentation Refer to the MCS 5100 Network Deployment and Engineering Guide, NN10313-191, that accompanies the MCS 5100 product and to your customer-specific information (CSI) datasheet for your sys...
Page 17 - Before you start the installation; MCS 5100 Network Deployment and; read and understood
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Before you start the installation Prerequisites Have available your completed Customer-Specific Information (CSI) datasheet. Refer to the MCS 5100 Network Deployment and Engineerin...
Page 18 - Minimum and; Acronyms; ATTENTION
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 18 Copyright © Nortel Networks Limited 2006 The procedures in this Guide assume that you are using the PuTTY VT100 terminal emulator tool. Provide the following hardware: • Business Policy Switch 2000 (BPS 2000) or Layer-2 switch • One (1) cat-5 Ethern...
Page 19 - Key stroke symbols; Escape
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 19 Copyright © Nortel Networks Limited 2006 Key stroke symbols The following key stroke symbols are used in this document. Text conventions used in this document This document uses the following text conventions: • Bolded...
Page 20 - Server configuration; Table 2, Mapping of Kit; Table 1 2-server configuration
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 20 Copyright © Nortel Networks Limited 2006 Server configuration The following table shows the basic configuration of the 2-server V210 Solaris system. Loading disks MCS 5100 Release 3.0 Base Platform System SoftWare Kit NTVW01AJ contains multiple copi...
Page 21 - Table 2, Mapping of Kit NTVW01BD disks to; Table 2 Mapping of Kit NTVW01BD disks to servers (with times); CD2 Solaris OS Packages
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 21 Copyright © Nortel Networks Limited 2006 MCS Base Platform System Software disks are loaded on the following servers as indicated in Table 2, Mapping of Kit NTVW01BD disks to servers (with times) Table 2 Mapping of Kit...
Page 23 - — minimum: 64MB of RAM. (This requirement is in addition to the
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Minimum and recommended requirements for customer-provided PC Configure your management pc to have an IP address that is in the same subnet of the IP address range used for your se...
Page 25 - Setting up the baseline hardware; Baseline hardware; Figure 3 Hardware connections overview
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Setting up the baseline hardware Baseline hardware See the following figure for an overview of the hardware connectivity. Figure 3 Hardware connections overview ATTENTION You need ...
Page 27 - Setting up rack to mount hardware; Procedure 1 Setting up rack to mount hardware; one (1) additional cat-5 ethernet cable to connect the MRV LX; WARNING
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 27 Copyright © Nortel Networks Limited 2006 Setting up rack to mount hardware Procedure 1 Setting up rack to mount hardware At the rack, 1 Mount all equipment. Refer to the following diagram that displays the mounting for...
Page 28 - Connecting the Sun Fire V210 server to the layer-2 switch; Procedure 2 Connecting the V210 server to the layer-2 switch; At the back of the Sun Fire V210 server,
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 28 Copyright © Nortel Networks Limited 2006 Figure 4 MCS 5100 19-inch rack Connecting the Sun Fire V210 server to the layer-2 switch Procedure 2 Connecting the V210 server to the layer-2 switch At the back of the Sun Fire V210 server, 1 Connect the Sun...
Page 29 - Figure 5 Back view of Sun Fire V210 server; not
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 29 Copyright © Nortel Networks Limited 2006 Figure 5 Back view of Sun Fire V210 server Figure 6 Sun Fire V210 server cabling to layer-2 switch Note 1: Net 0 and Net 1 are for redundancy. It is preferable that each Etherne...
Page 30 - Connecting the Sun Fire V210 server to the MRV LX terminal server; This server is only available in an AC power configuration.; Figure 7 Sun Fire V210 server network callouts; NTVW01IM are serial cables.
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 30 Copyright © Nortel Networks Limited 2006 Connecting the Sun Fire V210 server to the MRV LX terminal server The MCS 5100 platform uses the Sun Fire V210 server medium configuration. Note: This server is only available in an AC power configuration. Pr...
Page 31 - Figure 8 P1 and P2 custom cable connections to terminal server
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 31 Copyright © Nortel Networks Limited 2006 Figure 8 P1 and P2 custom cable connections to terminal server See note Note : This cable is only connected to configure the terminal server. Following configuration, remove the...
Page 33 - At the terminal server,; Procedure 5 Accessing the MRV LX terminal server; At the browser address field,
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing and accessing the MRV LX-4000 series terminal server The MRV LX terminal server allows the installer to access all the servers simultaneously. Procedure 4 Connecting the...
Page 34 - Figure 9 MRV Configuration Console window; Make sure you have the Java Plug-in installed.; Figure 10 Java Security Warning pop-up window
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 34 Copyright © Nortel Networks Limited 2006 Figure 9 MRV Configuration Console window 2 Make sure you have the Java Plug-in installed. 3 When your browser connects to the terminal server, the Java Security Warning window appears. Figure 10 Java Securit...
Page 36 - Figure 12 Login window; InReach
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 36 Copyright © Nortel Networks Limited 2006 Figure 12 Login window 6 Enter your Username and Password, and click Login . Note: By default, authentication is done against the local user database. To start, use the known username InReach and password acc...
Page 37 - Figure 13 User login window; To log in as a superuser, click the; Admin; button on the tool bar
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 37 Copyright © Nortel Networks Limited 2006 Figure 13 User login window 8 To log in as a superuser, click the Admin button on the tool bar and log in with the default Superuser password system. You can now configure the u...
Page 38 - Figure 14 Example: selecting Ports: Async; In the TCP window (see; Enabled
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 38 Copyright © Nortel Networks Limited 2006 Figure 14 Example: selecting Ports: Async a When you click on a port, the following dialog box appears for you to enter your information. Note: In the TCP window (see Figure 15 ), ensure that both the Telnet ...
Page 39 - Figure 15 Port 19 dialog box
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 39 Copyright © Nortel Networks Limited 2006 Figure 15 Port 19 dialog box For details on using the IP Configuration Menu, refer to “Using the IP Configuration Menu” in the LX-Series Configuration Guide. For information on ...
Page 40 - Procedure 7 Changing the password defaults; At the management pc,; Changing the
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 40 Copyright © Nortel Networks Limited 2006 Procedure 6 Connecting through the server to the MRV LX terminal server At the management pc, 1 Use the following procedure to access the command line interface port from a dumb terminal attached to an LX Ser...
Page 41 - Enter your NEW
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 41 Copyright © Nortel Networks Limited 2006 4 Enter a new user password at the Enter your NEW password: prompt. The password will be displayed as asterisks. 5 Re-enter the new user password at the Re-Enter your NEW passwo...
Page 43 - Once the connection is established to the target host,
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 43 Copyright © Nortel Networks Limited 2006 4 For port, enter <the port number which corresponds to Net MGT port (LOM) on the V210 and the MRV LX terminal server>. Note 1: For Net MGT (LOM) ports, use terminal serve...
Page 45 - Powering on the servers; Procedure 10 Powering on the servers; root; Procedure 11 Power on to get the >ok prompt; Break
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Powering on the servers Procedure 10 Powering on the servers At the server, 1 Turn power on to the server. 2 If the system boots up, log into the server as root . 3 Type init 0 [ E...
Page 47 - Installing Disks 1 to 3; Installing CD1; Approximate time estimate = 45 minutes; Procedure 12 Installing CD1; Yes
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing Disks 1 to 3 Installing CD1 Approximate time estimate = 45 minutes Procedure 12 Installing CD1 At the management pc, 1 Place CD1 in the CD-ROM drive. ATTENTION Refer to ...
Page 48 - Powering; Esc
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 48 Copyright © Nortel Networks Limited 2006 2 3 At the >ok prompt, boot the system: boot cdrom - install [Enter] For instructions on how to get to the >ok prompt, see Powering on the servers on page 45 . Note 3: You must wait several minutes befo...
Page 49 - Network Connectivity/Networked; machine
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 49 Copyright © Nortel Networks Limited 2006 Network Connectivity/Networked 3 Accept the default Yes by pressing Esc+2 to continue. DHCP/Use DHCP 4 Accept the default No by pressing Esc+2 to continue. Primary Network Inter...
Page 50 - wait
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 50 Copyright © Nortel Networks Limited 2006 Netmask/Netmask 9 Enter the subnet mask, for example: 255.255.255.0 . Press Esc+2 to continue. IPv6/Enables IPv6 10 Accept the default No . Press Esc+2 to continue. There is a slight delay between screens. Pl...
Page 51 - Continuing the process
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 51 Copyright © Nortel Networks Limited 2006 Continuing the process 15 Confirm your information. Ensure all fields are filled correctly. Press Esc+2 to continue. Press Esc+4 if you need to change anything. 16 At the Region...
Page 52 - Installing CD2
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 52 Copyright © Nortel Networks Limited 2006 Wait until you receive the login prompt. 21 You will be prompted to type in the root password twice. The password will not appear on the screen when you type. If you do not want a root password, press Enter t...
Page 53 - Installing CD3; Procedure 14 Installing CD3; Enter; Wait
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 53 Copyright © Nortel Networks Limited 2006 Installing CD3 Approximate time estimate = 90 minutes Procedure 14 Installing CD3 At the management pc, 1 Place CD3 in the CD-ROM drive and press Enter at the prompt. The instal...
Page 55 - Installing Disk 4; Approximate time estimate = 30 minutes; Procedure 15 Installing CD4; You will see the following message:
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing Disk 4 Database/Accounting/Management server (DBSvr, AcctMgr, MgmtSvr) Approximate time estimate = 30 minutes Procedure 15 Installing CD4 At the management pc, 1 Place C...
Page 56 - Select Time Source; How many external clock sources would you
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 56 Copyright © Nortel Networks Limited 2006 to use the local system clock as the time source. Note: Select Time Source • X - External Clock Device • E - External Clock Source {IP Address(es)} • I - Internal Clock (Unreliable) Select option from list ab...
Page 57 -
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 57 Copyright © Nortel Networks Limited 2006 7 Press Enter to continue. 8 You will see the following statement: ”You are now configuring IPMP (Multipathing)" ”Please have the Database Server Physical IP addresses and t...
Page 59 -
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 59 Copyright © Nortel Networks Limited 2006 You will see the following message: Obtaining IP Addresses for SysMgr/AcctMgr Failover Operation Note: If you don't have plan to configure the failover service, type in the same...
Page 60 -
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 60 Copyright © Nortel Networks Limited 2006 24 Enter the <IP address for the Physical Ethernet Net Management Port> (Default: 0.0.0.0) 25 Enter the <netmask for the Physical Ethernet Net Management Port> (Default: 255.255.255.0) 26 Enter th...
Page 63 - You are now configuring the Syslog Daemon.
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 63 Copyright © Nortel Networks Limited 2006 Is this IPMP group configuration acceptable? (Y/N) Select Y to accept or N to change. 14 The default route IP address should appear. If correct, press Enter . Otherwise, type it...
Page 65 - Approximate time estimate is 30 minutes.; Procedure 17 Installing CD5; CD5 will eject from the CD-ROM when installed.
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing Disk 5 (all servers) Approximate time estimate is 30 minutes. Procedure 17 Installing CD5 At the management pc, 1 Place CD5 in the CD-ROM drive, on the server, and press...
Page 67 - Procedure 18 Enabling or disabling the CD-ROM auto-mount; volmgt
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Enabling or disabling the automatic mount Use the following procedure if you need to use the CD-ROM auto-mount after installation of CD5. Execute this procedure on the MgmtSvr (Ser...
Page 69 - Procedure 19 Installing CD 6; CD6 will eject from the CD-ROM when installed.; must
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing Disk 6 (MgmtSvr/AcctMgr only) Approximate time estimate = 30 minutes Procedure 19 Installing CD 6 At the management pc, 1 Place CD6 in the CD-ROM drive, on the server, a...
Page 71 - Approximate time for loading Oracle 9 = 90 minutes
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing Oracle 9.2.0.4 on the database server The procedures to install Oracle 9 on the DBSvr include storing Oracle 9 CDs 1-6 to your local hard drive. Refer to the section tha...
Page 72 - The data from the CDs is copied to the default directory; Contact support if you do not receive the following response:; In step
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 72 Copyright © Nortel Networks Limited 2006 7 cp [ space] Install_CD_to_Disk [ space] / [Enter] 8 cd [ space] / [Enter] 9 ./Install_CD_to_Disk [Enter] 10 Storing data from CDs to the /IMS/ora_cds directory [Y]? : Select Y [Enter] Note: The data from th...
Page 73 - oracle; Prompt
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 73 Copyright © Nortel Networks Limited 2006 Refer to this table when entering the following command: cd [space] /IMS/ora_cds/Disk1 [Enter] ./Oracle_Install PRIMARY <primarydb-hostname> [space] <secondarydb-hostna...
Page 74 - Oracle_Install complete
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 74 Copyright © Nortel Networks Limited 2006 Failing to answer Y will cause the system to raise a disk space alarm on the SysMgr screen for the DBSvr. You will see the message: Removing Disk 1, Disk2, Disk3, Disk4, Disk5, Disk6 from /IMS/ora_cds... . Or...
Page 75 - Deploying the initial database load; Procedure 21 Deploying the initial database load (imssipdb); Is this a Replicated Database?
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Deploying the initial database load Prerequisites Ensure that the MCS Base Platform Software and Oracle 9i have been installed on database servers. Deploying the MCS database load ...
Page 76 - Enter Machine Logical IP Address - Primary DB
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 76 Copyright © Nortel Networks Limited 2006 5 You will see the following message: Select the Type of Deployment:[1] Initial Deployment[2] Upgrade of Database[3] Rollback of Database[4] Install Files only to Select 1 for initial deployment, then press E...
Page 77 - The dbdeploy.pl script is successfully deployed on the database.; Deploying and starting the Sysmgr; Procedure 22 Deploying and starting the Sysmgr
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Deploying and starting the Sysmgr Prerequisites The dbdeploy.pl script is successfully deployed on the database. Deploy the Sysmgr for a non-redundant configuration. The operator l...
Page 78 - Example; Querying DSM for available loads; The server load names are:
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 78 Copyright © Nortel Networks Limited 2006 3 Please enter the correct number of the load to deploy: Example [@micromgmt]/export/home/nortel:=> mgmtdeploy.pl Obtaining input required to deploy and configure the mgmtsvr bundle Please enter all IP add...
Page 79 - Sysmgr deployment verification; Procedure 23 Verifying the Sysmgr deployment; Rel3 NTme_pids mgmtsvr mgmtsvr.3 xxxx
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 79 Copyright © Nortel Networks Limited 2006 7 Will a Motorola SAM16 server (SIP PriGwy or SIP Audio Svr) be deployed? [Y/N] Always answer N [Enter] even if you have a third-party gateway. Note: Information obtained for de...
Page 81 - Registering your license key; Before installing the license key as described in; Procedure 24 Registering the license key
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Registering your license key Before installing the license key as described in Procedure 25, Installing the System Management Console , follow the procedure below to generate and r...
Page 82 - Figure 18 KRS login screen
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 82 Copyright © Nortel Networks Limited 2006 Figure 18 KRS login screen 4 In step 1 (Location) select a login server that matches your region, for example, European Login or North American Login. 5 In step 2 (Product Family) select the product you wish ...
Page 83 - Figure 19 Keycode Retrieval System, Creating your site; Select; Create; to register a new system. The following screen
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 83 Copyright © Nortel Networks Limited 2006 Figure 19 Keycode Retrieval System, Creating your site 7 Select Create to register a new system. The following screen appears.
Page 84 - Fill in the requested information and press the; Continue
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 84 Copyright © Nortel Networks Limited 2006 Figure 20 Keycode Retrieval System, Entering your site information 8 Fill in the requested information and press the Continue button. Ensure you choose the correct software version from the dropdown box. Your...
Page 85 - Figure 21 Keycode Retrieval System, Current Summary; Enter the MAC addresses of the CORE servers and click on; Add
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 85 Copyright © Nortel Networks Limited 2006 Figure 21 Keycode Retrieval System, Current Summary 9 Select the server you want to enter MAC addresses for first, then click on Create . 10 Enter the MAC addresses of the CORE ...
Page 86 - Figure 22 Keycode Retrieval System, Adding MAC address; Repeat Step; again to enter the; . For more information
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 86 Copyright © Nortel Networks Limited 2006 Figure 22 Keycode Retrieval System, Adding MAC address 11 Repeat Step 10 for the second MAC address (required). If you make an error, you can remove one or both and begin again. If you have a second Core that...
Page 87 - If you have a second Media Application Server for your; a second time as only two; Save; . You will have completed; Cancel
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 87 Copyright © Nortel Networks Limited 2006 Server Service Guide applicable to your system (see the Overview chapter for a listing of the service guides). Note: If you have a second Media Application Server for your syste...
Page 88 - Figure 24 Keycode Retrieval System, Current Summary; To generate keycodes for this site, click on; Gen KC with Auth; from the side bar, as shown in the following figure.
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 88 Copyright © Nortel Networks Limited 2006 Figure 24 Keycode Retrieval System, Current Summary 15 To generate keycodes for this site, click on Gen KC with Auth Code from the side bar, as shown in the following figure.
Page 89 - Figure 25 Keycode Retrieval System, Gen KC with Auth Code
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 89 Copyright © Nortel Networks Limited 2006 Figure 25 Keycode Retrieval System, Gen KC with Auth Code 16 To generate your keycodes, enter one of the MAC addresses of the server you want your Auth code applied to. In this ...
Page 90 - Figure 26 Keycode Retrieval System, Finding the keycode
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 90 Copyright © Nortel Networks Limited 2006 Figure 26 Keycode Retrieval System, Finding the keycode 18 Select the proper Software Version for your system. Then click on Continue .
Page 91 - Figure 27 Keycode Retrieval System, Adding a MAC address
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 91 Copyright © Nortel Networks Limited 2006 Figure 27 Keycode Retrieval System, Adding a MAC address 19 Enter the authcode number for the feature you wish to enable into the Auth Code box. Use the system Authorization cod...
Page 92 - Figure 28 Keycode Retrieval System, Entering the authcode; to have the KRS accept the authcode.
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 92 Copyright © Nortel Networks Limited 2006 Figure 28 Keycode Retrieval System, Entering the authcode 20 Select Add to have the KRS accept the authcode. 21 The KRS will validate the authcode and ensure the features represented are valid for your server...
Page 93 - Figure 29 Keycode Retrieval System, Summary of features
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 93 Copyright © Nortel Networks Limited 2006 Figure 29 Keycode Retrieval System, Summary of features 23 The KRS will indicate it is generating your keycodes and saving the results in its database. After generating the keyc...
Page 94 - Figure 30 Keycode Retrieval System, Retrieving the keycode; . From there you will see
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 94 Copyright © Nortel Networks Limited 2006 Figure 30 Keycode Retrieval System, Retrieving the keycode The screens show the features of your keycode and the option to download the keycode to your local PC. To download the keycode click on Download Keyc...
Page 95 - Download the new license key file to the MgmtSvr hard drive.
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 95 Copyright © Nortel Networks Limited 2006 Figure 31 Keycode Retrieval System, Retrieving your keycode, part 2 24 Download the new license key file to the MgmtSvr hard drive.
Page 98 - Installation; Launching the System Management Console
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 98 Copyright © Nortel Networks Limited 2006 12 Click Next to begin installation. 13 At the pop-up window that says, Installation successfully completed , click OK . Launching the System Management Console Make sure that the System Management Console ap...
Page 99 - the; Figure 32 Management Console Update License Key; Figure 33, Select License key File Window
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 99 Copyright © Nortel Networks Limited 2006 the License Key->Update dropdown menu (You can also select the System=>License Key=>Update menu option from the System tree.) as shown in Figure 32, Management Console ...
Page 100 - Figure 33 Select License key File Window
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 100 Copyright © Nortel Networks Limited 2006 Figure 33 Select License key File Window 7 Once you have entered the new License Key, you will see a dialog box notifying you whether the update is successful or fails. If the system does not find a license ...
Page 103 - Adding a server; Procedure 27 Adding a server; At the System Management Console,; Servers; micromgmt
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Adding a server Prerequisites The System Management Console has been successfully installed and started. Adding a server Use this procedure to add each of your servers. Note: You s...
Page 104 - Apply
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 104 Copyright © Nortel Networks Limited 2006 5 Click Apply . Longitude Optional field. Describes the longitudinal coordinates of the location of this server. default Platform type Drop-down menu with following choices: Sun or Linux. Select Sun. Sun IP ...
Page 105 - Components
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Adding and configuring the Accounting Module Prerequisites Make sure that • The System Management Console has been successfully installed and started. • A valid license key has bee...
Page 109 - Procedure 30 Adding the SIP Application Module component
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Adding and configuring the SIP Application Module Prerequisites Make sure that • The System Management Console has been successfully installed and started. • A valid license key ha...
Page 117 - Modify the public fields only. There are no private
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 117 Copyright © Nortel Networks Limited 2006 15 Use the table that follows to modify the fields for the Transport Management tab. The shaded rows indicate values that must be addressed by the installer. Modify the public ...
Page 118 - Table 16 Transport Management tab (Sheet 2 of 3)
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 118 Copyright © Nortel Networks Limited 2006 Discovery Period 3 default Active Pending Period 4 default HB Address Enabled checked Remote Server Address <machine logical IP of other application server> Only fill PUBLIC Service Address field. 120....
Page 127 - Installing the UFTP BaseSoftware; Procedure 34 Adding the UFTP software
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing the UFTP BaseSoftware You will be installing the UFTP software on the application server. Prerequisites The System Management Console has been successfully installed and...
Page 129 - Configuring the Provisioning Module
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Configuring the Provisioning Module Prerequisites Make sure the System Management Console has been installed and started. Procedures Procedure 35 Adding the Provisioning Module (Sm...
Page 131 - Table 26 Web Client Manager tab
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 131 Copyright © Nortel Networks Limited 2006 3 Use the values from the table that follows to complete the Web Client Manager tab parameters. The shaded rows indicate values that must be addressed by the installer. 4 Use t...
Page 133 - Click; A progress window will display indicating the status of; Table 30 Conference_Service tab; Conf Server URL
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 133 Copyright © Nortel Networks Limited 2006 7 Use the values from the table that follows to complete the Conference_Service tab parameters. 8 Click Apply . Note: A progress window will display indicating the status of th...
Page 143 - Table 37 IMS Main Database tab (Sheet 1 of 4)
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 143 Copyright © Nortel Networks Limited 2006 The shaded rows indicate values that must be addressed by the installer. Table 37 IMS Main Database tab (Sheet 1 of 4) Parameter Recommended value Notes Example SNMP request po...
Page 144 - Table 37 IMS Main Database tab (Sheet 2 of 4)
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 144 Copyright © Nortel Networks Limited 2006 Gauged Component Monitoring: Threshold monitors: Positive going threshold value 1 70 default Gauged Component Monitoring: Threshold monitors: Positive going threshold hysteresis 1 5 default Gauged Component ...
Page 145 - Table 37 IMS Main Database tab (Sheet 3 of 4)
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 145 Copyright © Nortel Networks Limited 2006 Gauged Component Monitoring: Threshold monitors: Alarm Severity on Positive Going Threshold2 MINOR default Gauged Component Monitoring: Threshold monitors: Alarm Severity on Ma...
Page 149 - Installing the iPlanet Monitor; Procedure 41 Adding the iPlanet Monitor
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Installing the iPlanet Monitor Prerequisites Make sure the System Management Console has been successfully installed and started. Procedures Procedure 41 Adding the iPlanet Monitor...
Page 151 - Parameter
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 151 Copyright © Nortel Networks Limited 2006 Component Monitoring: Threshold monitors: Lower Limit 0 default Component Monitoring: Threshold monitors: Negative going threshold value 10 default Component Monitoring: Thresh...
Page 159 - Table 40 Web Monitor tab (Sheet 10 of 12)
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 159 Copyright © Nortel Networks Limited 2006 Component Monitoring: Threshold monitors: Positive going threshold hysteresis 1 5 default Component Monitoring: Threshold monitors: Positive going threshold value 2 85 default ...
Page 160 - Table 40 Web Monitor tab (Sheet 11 of 12)
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 160 Copyright © Nortel Networks Limited 2006 Component Monitoring: Threshold monitors: Alarm Severity on Upper Limit OverRun MAJOR default Component Monitoring: Threshold monitors: Alarm Severity on Lower Limit UnderRun MAJOR default Component Monitori...
Page 163 - Verification procedures; Procedure 43 Verifying the database server
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Verification procedures Verifying Server1 (DBSvr/MgmtSvr/AcctMgr) The following commands are executed on the database/management/accounting Sun Fire V210 server using PuTTY SSH int...
Page 164 - Verify that the host file is correct:; # Internet host table; Verify the defaultroutefile:
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 164 Copyright © Nortel Networks Limited 2006 interface is ‘UP.’ This example output shows that bge0 is assigned to IP address 120.120.13.20, its subnet mask is ffffff00, which translates to 255.255.255.0, and the interface is UP (active). 4 Look for th...
Page 165 - Procedure 44 Verifying the application servers
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 165 Copyright © Nortel Networks Limited 2006 120.120.13.1 The only address in this file defines your default gateway route (your router). If this file is empty and the machine is rebooted, then you will not have network a...
Page 166 - Verify that the hosts file is correct:; Verify the defaultroute file:
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 166 Copyright © Nortel Networks Limited 2006 4 Look for the entry that starts with ‘bge1.’ The parameters that follow show the IP address, subnet mask, and whether the interface is ‘UP.’ This example output shows that bge1 is assigned to IP address 120...
Page 167 - Verifying the database load (imssipdb) deployment; Procedure 45 Verifying the database load (imssipdb) deployment; If the database deployment has completed, this file will not exist.
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 167 Copyright © Nortel Networks Limited 2006 The only address in this file defines your default gateway route (your router). If this file is empty and the machine is rebooted, then you will not have network access to your...
Page 169 - Appendix A Deploying the PC Client; Zip file containing latest code resources: pcclientcode.zip
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Appendix A Deploying the PC Client Along with the initial load, Nortel Networks delivers the following: • Java Network Launch Protocol (JNLP) file: pcclient.jnlp • Zip file contain...
Page 171 - The following procedure (
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © Nortel Networks Limited 2006 Appendix B Reloading IP addresses after system installation This process prompts you for the hostname, country, time-zone, and IP address to enable movement of the system after the...
Page 172 - Procedure 46, Reloading IP addresses after system; Procedure 46 Reloading IP addresses after system installation; This program; poweroff; ok; boot; What type of terminal are you using?
NN42020-310 MCS 5100 3.5 Standard 1.0 June 2006 172 Copyright © Nortel Networks Limited 2006 the server, which takes about five minutes, and then reload the IP addresses (see Procedure 46, Reloading IP addresses after system installation ). Reloading the IP addresses on each server takes about 15 mi...
Page 173 - Type the number of your choice and press Return:; System identification is completed.
MCS 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide 173 Copyright © Nortel Networks Limited 2006 Type the number of your choice and press Return: Select 2 and press Enter . 7 See the instructions for installing Disk 1 in this document for more information on what to enter ...
Page 176 - Multimedia Communication Server
Multimedia Communication Portfolio Multimedia Communication Server 2-server Sun Fire V210 (RoHS) Solaris Installation and Commissioning Guide Copyright © 2006 Nortel Networks. All rights reserved. The information in this document is subject to change without notice. The statements, configurations, t...