Page 3 - Contents
3 . Contents Regulatory information and safety precautions 5 European Union and European Free Trade Association (EFTA) notice 7 Safety messages 10 Notices 10 Software license 15 New in this Release 19 Features 19 Other changes 19 Document changes 19 Introduction 21 Task and estimated time 21 DC powe...
Page 4 - Technical specifications
4 Technical specifications 47 Technical specifications navigation 47 Model 8005DI DC power supply 47 DC input power specifications 47 DC output power specifications 47 Model 8005DC power supply 48 DC input power specifications 48 DC output power specifications 48 Nortel Ethernet Routing Switch 8300 ...
Page 5 - International regulatory statements of conformity; EMC—Electromagnetic Emissions—CISPR 22, Class A
5 . Regulatory information and safetyprecautions International regulatory statements of conformity This is to certify that the Nortel Networks 8300 series chassis andcomponents installed within the chassis were evaluated to the internationalregulatory standards for electromagnetic compliance (EMC) a...
Page 7 - EN 55022 (CISPR 22)–Electromagnetic Interference; BSMI statement for 8310 and 8306 chassis (Taiwan only)
National electromagnetic compliance (EMC) statements of compliance 7 EN 300386 statement The Ethernet Routing Switch 8300 series chassis complies with therequirements of EN 300386 V1.3.3 for emissions and for immunity for aClass A device intended for use in either Telecommunications centre orlocatio...
Page 8 - MIC notice for 8310 and 8306 chassis (Republic of Korea only); National safety statements of compliance
8 Regulatory information and safety precautions MIC notice for 8310 and 8306 chassis (Republic of Korea only) This device has been approved for use in Business applications only perthe Class A requirements of the Republic of Korea Ministry of Informationand Communications (MIC). This device may not ...
Page 10 - Safety messages; Notices
10 Regulatory information and safety precautions Piso 30, Oficina Col. San Jose Insurgentes Deleg-Benito Juarez México D.F. 03900 Tel: 52 5 480 2100 Fax: 52 5 480 2199 Embarcar a: Model 8005DC: -48 VCD, 29 A una fuente, una fuente + configuraciones de una fuenteredundante, dos fuentes o dos + config...
Page 11 - ESD
Safety messages 11 Attention notice ATTENTION An attention notice provides important information regarding the installation andoperation of Nortel products. Caution ESD notice CAUTION ESD ESD notices provide information about how to avoid dischargeof static electricity and subsequent damage to Norte...
Page 14 - PERICOLO
14 Regulatory information and safety precautions DANGER PERICOLO Le indicazioni Pericolo—Alta tensione forniscono informazioniper evitare situazioni o condizioni che potrebbero causare gravidanni alle persone o il decesso a causa dell’alta tensione o discosse elettriche. Danger notice DANGER Danger ...
Page 15 - Software license; This section contains the Nortel Networks software license.; Nortel Networks Inc. software license agreement; Licensed Use of Software. Nortel Networks grants Customer a
15 . Software license This section contains the Nortel Networks software license. Nortel Networks Inc. software license agreement This Software License Agreement ("License Agreement") is betweenyou, the end-user ("Customer") and Nortel Networks Corporation andits subsidiaries and aff...
Page 16 - Warranty. Except as may be otherwise expressly agreed to in
16 Software license of this Agreement. Customer shall not a) use, copy, modify, transferor distribute the Software except as expressly authorized; b) reverseassemble, reverse compile, reverse engineer or otherwise translate theSoftware; c) create derivative works or modifications unless expresslyaut...
Page 19 - New in this Release; Features; Document changes
19 . New in this Release The following sections detail what’s new in Nortel Ethernet Routing Switch8300 Installation — DC Power Supply, NN46200-310 for Release 4.1: • “Features” (page 19) • “Other changes” (page 19) Features The 8005DC and 8005DI DC is a new feature for the Ethernet RoutingSwitch 83...
Page 21 - Introduction; Task and estimated time
21 . Introduction This guide provides information about the 8005 Dual Input (DI) DC and8005DC power supplies used in the Ethernet Routing Switch 8300. The guide also includes instructions for adding and replacing this DCpower supply in the following Ethernet Routing Switch 8300 chassismodels: • 8306...
Page 22 - Navigation
22 Introduction Table 1Task and estimated time Task Estimated Time Preparing cable for installation 5 minutes for each power supply Removing the power filler panel 1 minute for each power supply Installing the DC power supply 2 minutes for each power supply Removing the DC power supply cover 1 minut...
Page 23 - DC power supply fundamentals; “Ethernet Routing Switch 8300 series chassis” (page 24); Power supply LED; DC power supply accessories; “Installing the DC power supply” (page 31)
23 . DC power supply fundamentals This section provides the basic information about the Ethernet RoutingSwitch 8300 DC power supplies. Navigation • “Power supply LED” (page 23) • “Ethernet Routing Switch 8300 series chassis” (page 24) • “8005DI DC power supply” (page 24) • “8005DC power supply” (pag...
Page 24 - Ethernet Routing Switch 8300 series chassis
24 DC power supply fundamentals In addition to the DC power supply and the installation guide, your DCpower supply shipment contains several hardware accessories. Verify thatthe items in the shipping container match those on the shipment packinglist. Use the following table as a checklist to verify ...
Page 25 - Minimum number of 8005DI DC power supplies to install; “Determining the minimum
8005DC power supply 25 Minimum number of 8005DI DC power supplies to install To configure an Ethernet Routing Switch 8300 system, consider the totalpower consumption to ensure proper system performance. The total input power consumption of the components (modules and fantrays) must not exceed the 80...
Page 26 - Minimum number of 8005DC power supplies to install; Redundant power configuration
26 DC power supply fundamentals Minimum number of 8005DC power supplies to install To configure an Ethernet Routing Switch 8300 system, consider the totalpower consumption to ensure proper system performance. The total input power consumption of the components (modules and fantrays or cooling module...
Page 27 - DC power supply installation; Prerequisites; Verify that you have the following tools and materials:; DC power supply installation procedures; “DC power supply installation navigation”
27 . DC power supply installation This chapter provides instructions to install the DC power supply in theEthernet Routing Switch 8300 chassis. See Nortel Ethernet Routing Switch 8300 Administration, NN46200-604 forthe minimum Ethernet Routing Switch 8300 software version required tosupport the hard...
Page 28 - DC power supply installation navigation; “Determining the minimum number of DC power supplies” (page 28); Determining the minimum number of DC power supplies
28 DC power supply installation DC power supply installation navigation • “Determining the minimum number of DC power supplies” (page 28) • “Preparing cables for installation” (page 29) • “Removing the power filler panel” (page 30) • “Installing the DC power supply” (page 31) Determining the minimum...
Page 29 - Step; Preparing cables for installation; CAUTION; Step
Preparing cables for installation 29 For more information, see Nortel Ethernet Routing Switch 8300 Installation— Chassis, NN46200-309. Procedure steps Step Action 1 Add the total (3.3 V and 12 V) input power consumption(wattage) for all components (modules and fan trays or coolingmodules). 2 Refer t...
Page 30 - Crimp the lugs onto the cables using a standard crimping tool.; Job aid: Cable stripping requirements; Removing the power filler panel
30 DC power supply installation 1 Strip 0.81 in. (2.1 cm) of insulation from the ends of the cables. 2 Crimp the lugs onto the cables using a standard crimping tool. CAUTION Risk of injury by electric shock Failure to properly crimp the lugs onto the cablesconstitutes a safety hazard. 3 If necessary...
Page 31 - See; Installing the DC power supply
Installing the DC power supply 31 CAUTION To maintain proper cooling, never operate the chassis with anempty power supply bay. If you replace a failed power supplyand you have no power filler panel, leave the failed powersupply installed until a replacement power supply is available. Procedure steps...
Page 32 - DANGER; Switch off the power supply.; Grasp the handle of the new power supply.
32 DC power supply installation CAUTION Risk of equipment damage To prevent damage from electrostatic discharge, always wearan antistatic wrist strap connected to an ESD jack. DANGER Risk of injury by electric shock Before working on this equipment, be aware of proper safetypractices and the hazards...
Page 33 - “Job aid: DC power supply input and; “Job aid: Attaching the earth ground lead to the; b crimp lug; lock washer; d Hex nut
Installing the DC power supply 33 5 Push the new power supply partway into the bay, leaving theterminal block at the side of the power supply exposed.See “Job aid: Inserting the DC power supply” (page 36) . 6 Use a Phillips screwdriver to remove the screw that secures theplastic safety cover to the ...
Page 35 - Firmly slide the power supply all the way into the bay. See
Installing the DC power supply 35 15 Firmly slide the power supply all the way into the bay. See “Job aid: Tightening the retaining screws on the DC power supply”(page 37) . 16 Tighten the retaining screws to firmly seat the power supply. 17 Attach the positive and negative terminal leads to the DC ...
Page 36 - Job aid: Inserting the DC power supply
36 DC power supply installation Job aid: Inserting the DC power supply Figure 1Inserting the DC power supply: 8306 and 8310 chassis Job aid: DC power supply input and ground stud location Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply NN46200-310 01.01 Standard 9 June 2008 Copyri...
Page 37 - Job aid: Attaching the earth ground lead to the ground stud
Installing the DC power supply 37 Job aid: Attaching the earth ground lead to the ground stud Job aid: Tightening the retaining screws on the DC power supply Figure 2Tightening the retaining screws on the DC power supply: 8306 and 8310chassis Nortel Ethernet Routing Switch 8300 Installation — DC Pow...
Page 39 - Translations of safety messages; ACHTUNG; PRECAUCIÓN
39 . Translations of safety messages This section provides translations of the different precautionary noticesused in this document. Notices CAUTION This device is a Class A product. Operation of this equipmentin a residential area is likely to cause harmful interference, inwhich case users are requ...
Page 40 - CUIDADO; ATTENZIONE; VORSICHT
40 Translations of safety messages CAUTION CUIDADO Este dispositivo é um produto Classe A. Operar esteequipamento em uma área residencial provavelmente causaráinterferência prejudicial; neste caso, espera-se que os usuáriostomem as medidas necessárias para corrigir a interferência porsua própria con...
Page 42 - PELIGRO
42 Translations of safety messages CAUTION PRECAUCIÓN Riesgo de daño del equipo Para prevenir el daño producido por una descargaelectrostática, use siempre una pulsera antiestática conectada aun enchufe ESD. CAUTION CUIDADO Risco de danos ao equipamento Para evitar danos com descarga eletrostática, ...
Page 43 - PERIGO
Notices 43 DANGER PERIGO Risco de ferimento por choque elétrico Enrolar os suportes aos cabos de maneira incorreta implica emum risco de segurança. DANGER PERICOLO Rischio di lesioni per shock elettrico Il piegamento non corretto delle linguette nei cavi costituisce unrischio per la sicurezza. CAUTI...
Page 47 - DC input power specifications; DC output power specifications
47 . AppendixTechnical specifications This appendix lists the electrical specifications for the 8005DI DC powersupplies. Technical specifications navigation • “Model 8005DI DC power supply” (page 47) • “Model 8005DC power supply” (page 48) Model 8005DI DC power supply This section provides power rat...
Page 52 - Installation — DC Power Supply
Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply Copyright © 2008 Nortel NetworksAll Rights Reserved. Printed in Canada and the United States of AmericaRelease: 4.1 Publication: NN46200-310 Document status: Standard Document revision: 01.01 Document release date: 9 June 2008 To pro...
