Page 2 - Table of Contents; DECT
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 2 Table of Contents TABLE OF CONTENTS ........................................................................................ 2 1 HANDSET INFORMATION .......................................................................... 4 2 G...
Page 4 - HANDSET INFORMATION
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 4 1 HANDSET INFORMATION This product is classified with IP52 classification as defined in EN60529. Ensure the adapter voltage is the same as the electrical outlet voltage. The DECT Industrial Handset uses radio signals and does not...
Page 5 - GENERAL
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 5 2 GENERAL 2.1 Handset The handset has 22 keys which are described as follows: Voice (short press) & E2 (long press) Message function. In Menu - Cursor left After a digit - delete last digit. Long press - delete all. In on hoo...
Page 6 - Display
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 6 2.2 Display Three lines, of 12 alphanumeric characters in length, can show text or caller information. The bottom line displays 5 icons, they are described as follows: ON – Handset in range OFF – Handset out of range ON – New E2 ...
Page 7 - INSTALLATION; Installing the Charger
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 7 3 INSTALLATION 3.1 Installing the Charger Connect the power line cable to the back of the charger and then plug the AC adapter into the mains socket outlet. 3.2 Wall Mounting the Charger • Drill two holes in the wall, with a hori...
Page 8 - Battery Management
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 8 Installation of the Chargers on the Charging Rack The chargers can be placed in two different positions, depending on the usage of the chargers. If the chargers are placed on the desktop the chargers should be connected with 2 sc...
Page 9 - Operating Times
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 9 3.7. Operating Times Standby time - up to 90 hours. Talk time – up to 10 hours. 3.8. Battery Charging Information The battery capacity can be checked using the menu option. As follows: 1. Press the key to enter the menu display a...
Page 10 - Low Battery Warning
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 10 Note: When the handset is placed in the charger, the vibrator and B-answer (auto answer functions are disabled. 3.10 Low Battery Warning If the battery capacity reaches a certain minimum value: On-Hook • The display flashes batt...
Page 11 - INITIAL SETUP
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 11 4 INITIAL SETUP 4.1 Initial Setup and Operation The handset can be operated on a maximum of 10 DECT systems. Before you can make a call via a DECT system, the handset has to be subscribed to the Meridian 1. A pin code is necessa...
Page 12 - Remove Subscription
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 12 The default handset name ‘PHILIPS’ is displayed on handsets that are not subscribed. When the handset cannot be subscribed to the system, the display will show ‘subscription failed’. Press the key to leave the subscription faile...
Page 14 - USING THE HANDSET; Operating in Standby Mode
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 14 5 USING THE HANDSET A complete menu tree is located at the end of this document for reference. 5.1 Operating in Standby Mode The menu feature operates as follows: 1. Press the key to enter the menu display. 2. Use the or key to ...
Page 15 - The keypad lock can be activated by pressing the; Volume Control; Dialing; Numbers entered incorrectly can be deleted with the
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 15 The keypad lock can be activated by pressing the key immediately followed by the * key. The same operation is required to deactivate the keypad lock. ‘KEY LOCKED’ is displayed when the keypad lock is activated. 5.4 Volume Contro...
Page 16 - or; Dial from the Personal Phone Book
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 16 Note: When deleting a digit, use the or keys to place the cursor on the digit to the right of the digit to be removed. Press the key for extended duration to remove the digit. 2. Press the key to dial the number. 3. Press the ke...
Page 17 - Redial
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 17 To dial a number from the personal phone book: 1. Press the key to enter the Phone Book. The first entry appears in the display. If the phone book is empty, the key will not function. 2. From this display, there are 2 methods to...
Page 18 - Receiving Calls
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 18 5.5.5 Caller List (CLIP) When the handset rings and the call is not answered, it will be stored in the Caller list (CLIP). The Caller list contains a maximum of 10 entries. The entries in the Caller list and the Redial list can ...
Page 19 - Mode; FEATURES DURING CONVERSATION; Call Transfer
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 19 If automatic call answering is used, the phone call will be accepted automatically. It is not necessary to press the key. 5.7 Silent Mode In Silent mode the handset will use the vibrator instead of ringer and bleep sounds. To sw...
Page 20 - Microphone Mute; the; key. When the microphone mute is active the display shows MIC. MUTED.; Press the; Add Personal Phone Book Entry; key to enter the number in the phone book, the display shows
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 20 6.3 Microphone Mute The microphone mute can be activated or deactivated during conversation by pressing the key. When the microphone mute is active the display shows MIC. MUTED. 6.4 Personal Phone Book Press the key to enter the...
Page 21 - Edit a Number in the Personal Phone Book
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 21 3. Press the key to enter the number. The display will show NAME:, type in a name using the alphanumeric keys. 4. Press the key to enter the name in the phone book and return to the stand-by mode again. 5. Pressing the key at an...
Page 22 - Edit a Name in the Personal Phone Book
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 22 Note: When deleting a digit, use the or keys to place the cursor on the digit to the right of the digit to be deleted. Press the key for extended duration to remove the digit. 6.4.3 Edit a Name in the Personal Phone Book To edit...
Page 23 - Language Selection
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 23 To delete a personal phone book entry: 1. Press the key to enter the phone book and select the entry to be deleted. 2. Press the key to select this entry for deletion. The display will show 'DELETE?' 3. Press the key to confirm ...
Page 25 - Settings
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 25 4. Press the key to return to stand-by mode. 6.8 Settings Within a profile the user can define several settings. These are described in the following sections. Each setting will have a default as shown in the table below. 6.9 Ri...
Page 26 - Ringer Volume
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 26 6.10 Ringer Volume The 5-step ringer volume option enables users to set the loudness of the bleep and ringing tones. To set the ringer volume: 1. Enter the Set Profile display and use the or key to select ringer vol.. 2. Press t...
Page 27 - Vibrator
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 27 6.12 Vibrator The vibrator functions when the handset is ringing or bleeping, it vibrates in the same pattern as the ringer or bleep sound. To switch the vibrator ON/OFF: 1. Enter the Set profile display use the or key to select...
Page 28 - Start Volume
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 28 6.14 Start Volume The 5-step start volume option enables users to set the loudness of the earpiece to a certain value to start from. Adjustment during conversation can be made with the – and the + keys at the side of the handset...
Page 29 - OUT OF RANGE
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 29 show backlight on or backlight off before switching to the Set Profile display. 7 OUT OF RANGE Each handset is equipped with an out of range detection option. There are three detection mechanism for out of range. They are: 1. Di...
Page 30 - SHORTCUT LIST
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 30 9 SHORTCUT LIST The following features can be accessed easily via the shortcuts mentioned in the table below.
Page 31 - MENU TREE; MEN
DECT Industrial Handset User Guide Issue 02 Galway M1 Design Support 31 10 MENU TREE A B B A MENU SELECT LOGIN LOGIN SYSTEM 01* SUBSCRIPTION REMOVE SUBSCRIPTION CREATE CREATE SEARCH ID: 123456789012 REMOVE SYSTEM 1* 1630 REMOVE SYSTEM 2 POB 212 REMOVE SYSTEM 10 123456789015 REMOVE SYSTEM 3 BUILDING ...
