Nortel 911x Series - Manual
Nortel 911x Series – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Preface; installation instructions for the Remote Gateway 9115 unit; Technical Documentation; link at the
- Page 5 – Installation; Installing the Remote Gateway 911x unit; Installing the Remote Gateway 9110 circuit card; Phillips screwdriver
- Page 6 – Installing ferrite beads; Open the plastic latch at the side of the ferrite bead.; tightly; around the ferrite bead.
- Page 7 – Connecting the Remote Gateway 911x series unit
- Page 8 – Attach the power cord to the power transformer.
- Page 9 – Configuration; The procedure to configure the Remote Gateway 911x series unit; Telephone menu keys
- Page 10 – Release; Configuring the Remote Gateway 911x series unit; Hold; Telephone menu
Standard 1.1
Part No. N0027496
January 2005
Remote Gateway 911x Series
Quick Start Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 Remote Gateway 911x Series Quick Start Guide Standard 1.1 Preface Congratulations on your purchase of the Remote Gateway 911x series unit. With the Remote Gateway 911x product you have the advantage of a full featured host PBX at your home office. This Quick Start Guide gets you up and running wit...
5 Remote Gateway 911x Series Quick Start Guide Standard 1.1 Installation You need a 10BaseT Ethernet cable to provide the Remote Gateway 911x series unit with voice over IP capability. For instructions on how to install a Remote Gateway 911x unit turn to “ Installing the Remote Gateway 911x unit ” o...
6 Installation P0918963 Standard 1.1 5 Secure the circuit card to the footstand with the two screws provided. 6 Plug the 18 cm (7 inch), TCM cable into the RJ11 jack on the telephone (the other end is attached to the Remote Gateway 9110 circuit card). 7 Re-attach the footstand to the bottom of the t...
