Nortel 222 - Manual

Steps 1 4

Before you

start

Steps 18 19

Test your Internet

connection

Steps 13 16

Start the wizard

Steps 10 12

Access the BSR222

Steps 5 8

Install the hardware

Step 9

Assign TCP/IP

addresses

Step 17

Enter ISP IP

addresses

(if required)

BSR222

Business Secure Router 222

Quick Install Guide

You can download all the documents

referred to in this Quick Install guide at

www.nortel.com.

2

3

4

5

6

7

8

1

9

15

16

17

18

19

10

11

12

13

14

1.

Contact your Internet Service

Provider (ISP) to get the following

information:

a.

Encapsulation type: Ethernet, PPP

over Ethernet, PPTP

b.

ISP IP addresses: WAN, DNS

servers, Gateway, and WAN MAC

address

2.

Get your

Domain Name from the

User Accounts dialog box in the Control

Panel. For details, see your operating

system Help files.

3.

Get your

Computer Name from the System

Properties dialog box on your computer.

4.

Get the IP addresses

of DNS and remote

servers on your LAN.

(optional)

5.

Place the BSR222 on

a flat surface with

sufficient clearance for

the front and rear

connection points, or

use the supplied holder

to vertically mount it.

6.

Connect your PC

and up to three

other computers or

network devices to

the four Ethernet

ports.

7.

Connect your Internet service to the

WAN port next to the Power LED.

8.

Connect the supplied power adapter to the rear of the

BSR222 and to a grounded AC power source.

9.

Set up the IP addresses on each computer connected to the

BSR222:

a.

Set each computer to dynamically obtain an IP address, or

assign a static IP address. If you assign a static IP address,

choose one between 192.168.1.2 and 192.168.1.254.

Note: Assign a static IP address for PPTP encapsulation.

b.

Assign a

subnet mask of 255.255.255.0 and a default

gateway of 192.168.1.1.

c.

If you assign a static IP address in step 9a, assign the

DNS

server IP addresses. If you do not know the DNS server IP

addresses, choose

Obtain a DNS server address automatically.

10.

In the address

field of your browser,

enter 192.168.1.1

11.

Enter the default user

name (nnadmin) and password

(PlsChgMe!) to log onto the

BSR222.

12.

You can replace the default password or

use it as it is.

13.

On the left

navigation pane, click

Wizard.

16.

Depending on the type of encapsulation that your ISP

uses, enter the following information:

Ethernet

Choose the

Service Type: Standard, RR-Toshiba, RR-Manager, or RR-Telstra.

Enter

User Name, Password, and Login Server IP Address if required.

PPP over Ethernet

Enter the

Service Name, User Name and Password assigned by your ISP, and

enter

100 seconds as the Idle Timeout. Choose Nailed-Up Connection to

maintain constant service.

PPTP

Enter the

User Name and Password assigned by your ISP. Choose Nailed-Up

Connection to maintain constant service. Also, enter the My IP address, My IP

subnet mask, PPTP server IP address, and Connection ID (of the form

n:name).

17.

If your ISP provides a

fixed IP address for their

WAN:

a.

Choose

Use fixed IP

address.

b.

Enter the

My WAN IP,

My WAN IP subnet mask,

Gateway (Remote IP), and

System DNS Servers

addresses, if required.

Otherwise, accept the

default value of

Get

automatically from ISP.

18.

The BSR222 setup is

complete. Close your browser.

19.

Test your connection to the Internet by opening your

browser and visiting a known Web site.

15.

From the first Wizard window, choose the type of

encapsulation and service that your ISP supplies. The

wizard displays different windows for each type of

encapsulation and service.

14.

In the

General Setup window, enter the system

name (your computer name) and the domain name.

For more detailed installation instructions, refer

to

Nortel Business Secure Router 222

Fundamentals

.

N0118060

C

M

Y

CM

MY

CY

CMY

K

BSRQuickInstallGuide_Trifold3.pdPage 1 8/2/2006 10:01:54 AM