Nortel 100 Chassis - Manual
Nortel 100 Chassis – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Installing the Power Supply for the Centillion 100 Chassis; Attenzione: Leggere attentamente
- Page 5 – Adding a Power Supply; Flat-tip screwdriver; Only qualified technicians should install this equipment.
- Page 6 – screws to between 2 and 4 inch-pounds of torque. Do not overtighten.
- Page 7 – Replacing a Power Supply; Only qualified technicians should replace this equipment.
- Page 9 – For detailed instructions, refer to
- Page 10 – Specifications; Electrical; Thermal rating; Physical
Part No. 893-00940-A
July 1996
Installing the Power
Supply for the
Centillion 100 Chassis
C100PS.Bk Page i Friday, May 9, 1997 1:54 PM
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Installing the Power Supply for the Centillion 100 Chassis 2 893-00940-A Attenzione: Leggere attentamente Controllare questo cavo di alimentazione, verificarne il collegamento con la presa appropriata nonché la certificazione per l'uso nell'impianto elettrico posseduto. Non utilizzare assolutamente ...
Adding a Power Supply 893-00940-A 3 Adding a Power Supply Required tool: Flat-tip screwdriver 1. Use the flat-tip screwdriver to loosen the two screws; then remove the filler panel from the chassis. 2. Align the new power supply with the slot guides and slide the power supply into the chassis. CAUTI...
Installing the Power Supply for the Centillion 100 Chassis 4 893-00940-A 3. Push down on the power supply handle to align the screws and tighten the screws to between 2 and 4 inch-pounds of torque. Do not overtighten. 4. Connect the power cord to the power supply and then to the wall. (See power cor...
