Page 2 - IMPORTANT
2 VHF 7200 US and 7200 EU Operation Manual NAVMAN IMPORTANT : 1. DSC functions will not operate until your MMSID has been entered. Refer to section 4.2 for details. 2. The radio channels installed into the Navman VHF radio may vary from country to country, depending upon the model, and government or...
Page 3 - Contents
3 VHF 7200 US and 7200 EU Operation Manual NAVMAN Contents Chapter 1 - General Information...............................................................6 1.1 Features .................................................................................................... 61.2 Customizing your Navman VH...
Page 7 - Customizing your Navman VHF Radio; How to Enter Alphanumeric Data
7 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1.2 Customizing your Navman VHF Radio You can customize the radio to suit your individual preferences. Some preferences can be set directly through the keys as explained in this chapter. Other preferences are set up through the built-in menus and the...
Page 8 - LCD Symbols and Meanings; Symbol Meaning
8 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1.5 LCD Symbols and Meanings This simulation shows the locations of all the following information symbols: Symbol Meaning TX Transmitting. HI LO Transmission power. High (HI) 25W or Low (LO) 1W. WX Weather channel. WX ALT Weather Alert. Alarm beeps w...
Page 10 - Basic Operation and Key Functions; Key Function; Squelch or Threshold Level.; Three Favorite Channels.; Also on the microphone.
10 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1.6 Basic Operation and Key Functions All possible keys and their functions are listed. Note that some of the keys are not available, depending on your radio model and type of microphone. Key Function VOL/PWR Volume and Power. Turn clockwise to powe...
Page 11 - Scan
11 VHF 7200 US and 7200 EU Operation Manual NAVMAN To scan only one of your favorite channels, press 3CH then immediately press and release SCAN. If you want to scan all three favorite channels, press 3CH then immediately press and hold SCAN. To add a favorite channel for the fi rst time, select tha...
Page 12 - Radio Setup Menu, DSC Setup Menu
12 VHF 7200 US and 7200 EU Operation Manual NAVMAN Some channels allow only low power transmissions intially, but can be changed to high power by holding down H/L and PTT at the same time. See Appendix C for a complete listing of channel charts. UIC Channel Bank. 7200 US only. Press to toggle betwee...
Page 13 - BUDDY LIST
13 VHF 7200 US and 7200 EU Operation Manual NAVMAN Chapter 2 - The Radio Menu (MENU) 2.1 Radio Menu Options (Menu) The following options are available through CALL/MENU: Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and change data. BUDDY LIST LOCAL/DIST BACKLIGHTCONTR...
Page 15 - not
15 VHF 7200 US and 7200 EU Operation Manual NAVMAN 2.2.3 Delete an Entry 1. Select BUDDY LIST. Press ENT to display the list of entries. 2. Scroll down (if required) to the entry you want to delete and press ENT. 3. Select DELETE then select YES. 4. The entry is deleted immediately and the buddy lis...
Page 18 - always
18 VHF 7200 US and 7200 EU Operation Manual NAVMAN 2.5.4 Time Display Options (TIME DISPLAY) If you have entered the time manually as described in the previous sections, the time is always shown on the screen with the prefi x M. However, if the vessel position is being updated through a GPS navigati...
Page 19 - except
19 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1. Select GPS/DATA, then SETTING. 2. Select GPS ALERT. 3. Select ON (on) or OFF (off) as desired. 2.6 GPS Simulator (SIMULATOR) The GPS Simulator is set to OFF whenever the radio is turned ON or whenever real GPS data is available through the COM po...
Page 24 - Switch the Barometric Screen Display ON or OFF
24 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1. Select RADIO SETUP, then BARO. 2. Select BARO UNITS, then press ENT to show the air pressure in MILLIBARS or select INCHES to show the air pressure in inches of mercury. 3. Press ENT to enable the setting and return to the menu. 3.8.2 Switch the ...
Page 27 - fi rst time
27 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1. Select DSC SETUP, then USER MMSID. 2. If this is the fi rst time that you are entering your user MMSID, a dashed line appears. Enter your user MMSID along the dashed line. Press ENT to confi rm each correct entry and to move to the next digit. If...
Page 30 - DSC functionality can be disabled but this is not recommended.; AUTO; buddy polling requests.; OFF; ignores all incoming buddy LL polling requests.
30 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1. Select DSC SETUP, then ATIS FUNC. 2. Select ON (on) to enable the ATIS functionality and automatically disable DSC functionality. The ATIS annunciator appears on the screen. It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneou...
Page 31 - MUTE THE NOTIFICATION RINGTONE
31 VHF 7200 US and 7200 EU Operation Manual NAVMAN 4.8 MUTE THE NOTIFICATION RINGTONE If you have requested LL position data from any buddies, the 7200 will notify you of any incoming data by sounding 2 friendly ringtones. If desired, you can mute this audible notifi cation as follows: 1. Select DSC...
Page 32 - Chapter 5 - Sending and Receiving DSC Calls
32 VHF 7200 US and 7200 EU Operation Manual NAVMAN Chapter 5 - Sending and Receiving DSC Calls 5.1 WHAT IS DSC? DSC (Digital Selective Calling) is a semi-automated method of establishing VHF, MF, and HF radio calls. It has been designated as an international standard by the IMO (International Mariti...
Page 34 - URGENCY
34 VHF 7200 US and 7200 EU Operation Manual NAVMAN 5.2.4 Recall the Most Recent Incoming Call (LAST) This facility is useful and used frequently. 1. Press CALL/MENU to enter DSC mode. LAST CALL is automatically selected. Press ENT to display the contact details of the most recent incoming call. 2. S...
Page 36 - Select Your Buddy
36 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1. Press CALL/MENU to enter DSC mode, then select DIST LOG. 2. The most recently received Distress Call Is the fi rst entry (01) in the Distress Log. Select the entry that you want to call and press ENT. The details are displayed over two screens th...
Page 37 - Set the Time Interval
37 VHF 7200 US and 7200 EU Operation Manual NAVMAN 2. Select SET BUDDY and scroll to the desired buddy. You can set a maximum of three buddies to track. 3. Select ON (on) to track that buddy or OFF (off) to not track that buddy, and press ENT to confi rm. (Repeat for the other two buddies if necessa...
Page 40 - Chapter 6 - Distress Calls
40 VHF 7200 US and 7200 EU Operation Manual NAVMAN Chapter 6 - Distress Calls 6.1 Sending a distress call 1. Open the red cover labelled DISTRESS. If time is available to specify the nature of the distress, go to step 2. Otherwise, go directly to step 3. 2. Press the DISTRESS key to display the foll...
Page 42 - GENERAL; Appendix A - Technical Specifi cations
42 VHF 7200 US and 7200 EU Operation Manual NAVMAN Navman VHF 7200 GENERAL Power Supply: 13.6 V DC. Current drain:Transmit 6 A at 25 W Tx / 1.5 A at 1 W Tx Receive Less than 250 mA in standby Baro Sampling (radio off): Less than 3 mA, 85 mA in active standby Useable channels: International, USA, Can...
Page 43 - TRANSMITTER
43 VHF 7200 US and 7200 EU Operation Manual NAVMAN Channel Naming: Yes Tri watch, Favorite channel scan, All scan: YesUser programmable MMSID: YesMMSID and NAMEdirectory: Yes - 20 numbers & group TRANSMITTER Frequency: 156.025 - 157.425 MHz Output power: 25 W / 1 W selectable Transmitter protect...
Page 44 - Appendix B - Troubleshooting; The transceiver blows the fuse when the power is switched on.
44 VHF 7200 US and 7200 EU Operation Manual NAVMAN Appendix B - Troubleshooting 1. The transceiver will not power up. A fuse may have blown OR there is no voltage getting to the transceiver. a) Check the power cable for cuts, breaks, or squashed sections. b) After checking the wiring, replace the 7 ...
Page 45 - Appendix C - VHF Marine Channel Charts
45 VHF 7200 US and 7200 EU Operation Manual NAVMAN Appendix C - VHF Marine Channel Charts C.1 International (EU-DSC ON) Note: For assistance in understanding the Table, see notes a) to o) below. (WRC-2000) Channel designator Notes Transmitting frequencies (MHz) Internship Port operations and ship mo...
Page 46 - SPECIAL NOTES ON INTERNATIONAL CHANNEL USEAGE
46 VHF 7200 US and 7200 EU Operation Manual NAVMAN SPECIAL NOTES ON INTERNATIONAL CHANNEL USEAGE Notes referring to the TableGeneral notes The INTERNATIONAL mode is not legal for use in US or Canada Watersa. Administrations may designate frequencies in the inter-ship, port operations and ship moveme...
Page 47 - Specifi c notes
47 VHF 7200 US and 7200 EU Operation Manual NAVMAN arrangement between interested and affected administrations. c. The channels of the present Annex, but preferably channel 28 and with the exception of channels 06, 13, 15, 16, 17, 70, 75 and 76, may be used for direct-printing telegraphy and data tr...
Page 48 - C.2 USA Channel Chart
48 VHF 7200 US and 7200 EU Operation Manual NAVMAN C.2 USA Channel Chart CH SEND (MHz) RECEIVE (MHz) TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG 01A 156.050 156.050 Port Operations, Selected VTS Areas Yes Yes PORT OPS/VTS 03A 4 156.150 156.150 US Government, Coast Guard Yes Yes UNAUTHORIZED 05A...
Page 50 - WEATHER; SPECIAL NOTES ON USA CHANNEL USAGE
50 VHF 7200 US and 7200 EU Operation Manual NAVMAN WEATHER MHz TRAFFIC TYPE NAME TAG Wx01 RX Only 162.550 NOAA WEATHER CHANNEL ------ ------ NOAA WX Wx02 RX Only 162.400 NOAA WEATHER CHANNEL ------ ------ NOAA WX Wx03 RX Only 162.475 NOAA WEATHER CHANNEL ------ ------ NOAA WX Wx04 RX Only 162.425 NO...
Page 51 - C-3 CANADA Channel CHART
51 VHF 7200 US and 7200 EU Operation Manual NAVMAN C-3 CANADA Channel CHART CH SEND(MHz) RECEIVE (MHz) TRAFFIC TYPE SHIP TO SHIP SHIP TO SHORE NAME TAG 01 156.050 160.650 Public Correspondence, Duplex No Yes TELEPHONE 02 156.100 160.700 Public Correspondence, Duplex No Yes TELEPHONE 03 156.150 160.7...
Page 54 - C-4 EU INLAND WATERWAY CHANNELS Country Specifi c
54 VHF 7200 US and 7200 EU Operation Manual NAVMAN C-4 EU INLAND WATERWAY CHANNELS Country Specifi c For specifi c channel information for your country, please refer to local authorities. Channel Specifi c footnotes Transmitting frequencies (MHz) Ship-to-ship Ship-to-port Naut. Inform Ship Land 60 a...
Page 56 - General remarks to frequency table 1
56 VHF 7200 US and 7200 EU Operation Manual NAVMAN 1.1 General remarks to frequency table 1 1.1.1 The channels for service categories ship-to-ship and nautical information may also be used for vessel traffi c -sys tems by traffi c centres. 1.1.2 In some countries, frequencies certain channels are us...
Page 57 - Special Channels
57 VHF 7200 US and 7200 EU Operation Manual NAVMAN Appendix D - MMSID & License Information You must obtain a user MMSID (Marine Mobile Service Identity) and enter it into your radio in order to use the DSC functions. Contact the appropriate authorities in your country. If you are unsure who to ...
