Page 2 - NAVMAN
Page 3 - English; USER GUIDE
M300 1-3 NAVMAN English USER GUIDE M300 – English M 3 0 0
Page 4 - Navman’s 300 series GPS Sport.Tools provide an affordable and; Welcome
M300 1-4 NAVMAN Navman’s 300 series GPS Sport.Tools provide an affordable and reliable way to track and store a variety of personal performance indicators. Please read this guide carefully and familiarize yourself with the interface and functions, as well as the intended use and limitations of the N...
Page 5 - Content; General information; Care and maintenance; Normal operation
M300 1-5 NAVMAN Content M300 - Content 1.0 General information 1-6 1.1 Checklist 1-6 1.2 Care and maintenance 1-6 1.3 Water resistance 1-6 1.4 Changing the battery 1-7 2.0 Navman M300 interface 1-8 2.1 Button functions 1-8 2.2 Display screen 1-8 3.0 Getting started 1-9 3.1 Be outdoors 1-9 3.2 Fit th...
Page 6 - CAUTION: Please ensure battery cover is in place during; M300 – General information
M300 1-6 NAVMAN 1.0 General information 1.1 Checklist The M300 package should contain the following items: • Navman M300 GPS Sport.Tool • armband • quick guide • user guide • 1 x AA battery • registration card 1.2 Care and maintenance Do not attempt to disassemble the M300; there are no user service...
Page 7 - M300 - General information; Changing the battery; Always shut down the M300 before changing the battery.; Note: All system settings, and the calculated data that was stored; If battery power becomes low during operation the battery icon; For best performance:; constant = low power; to perform a controlled shutdown.; Turn D-ring anti-clockwise and slide enclosure cover down to
M300 1-7 NAVMAN M300 - General information 1.4 Changing the battery Always shut down the M300 before changing the battery. Note: All system settings, and the calculated data that was stored at the last controlled shutdown*, are retained when the battery is removed. This information persists indefinit...
Page 8 - There are two control buttons,; Note: where it is required to press and HOLD buttons, a countdown; Mode Icons; RCL
M300 1-8 NAVMAN 2.1 Button functions There are two control buttons, and . These buttons are pressed separately or together to turn the unit on and off, cycle through modes, and select mode options. Throughout this guide the button icons are used as follows: = press this button = press this button = ...
Page 9 - M300 - Getting started; to turn the power on and enter setup, OR; Always enter setup first if you wish to change settings.
M300 1-9 NAVMAN M300 - Getting started 3.1 Be outdoors The M300 is not intended for operation indoors or under water as it uses Global Positioning System (GPS) satellites to get time and date information, and to calculate distance and speed. For best results, always use the M300 outdoors with an uno...
Page 10 - To enter setup; Press and hold; Note: To enter setup after starting normal operation you will need; To leave setup; Note: you must leave setup first if you want to turn the power off.; To start normal operation
M300 1-10 NAVMAN M300 - Getting started 3.3.1 Enter setup To enter setup Press and hold to turn the power on and enter setup. When the counter reaches zero, the M300 will enter setup. If you release before the counter reaches zero the M300 will immediately start normal operation. Note: To enter setu...
Page 12 - Set 12hr or 24hr time display format.; To access this option; If necessary, press and hold
M300 1-12 NAVMAN M300 - Setup 4.1.1 Set time format Set 12hr or 24hr time display format. To access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set time format 1) Press to start editing (time format optio...
Page 13 - Set beep ON or beep OFF. When beep is ON, an audible ‘beep’; Access this option; distance is displayed in ‘km’.
M300 1-13 NAVMAN M300 - Setup 4.1.3 Beep Set beep ON or beep OFF. When beep is ON, an audible ‘beep’ will sound when buttons are pressed. Access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set button beep...
Page 14 - This option lets you adjust the M300 to display local time*. You; GPS data are received.
M300 1-14 NAVMAN M300 - Setup 4.1.5 Set offset (set local time) This option lets you adjust the M300 to display local time*. You only need to do this once, unless operating the unit in a new time zone. (* By default the M300 displays GPS time. The M300 will perform all functions accurately without a...
Page 15 - settings; beep
M300 1-15 NAVMAN M300 - Setup 4.1.6 Editing settings (overview) KEY = press this button = press this button = press both buttons together settings editing details beep beep beep ON beep OFF set units (knots) set units (km/h) set units (knots) set offset set 12hr set 31-12 set 24hr set 12-31 set unit...
Page 16 - M300 - Normal operation; Press
M300 1-16 NAVMAN M300 - Normal operation 5.1 Modes Press to turn the power on and start normal operation. Press repeatedly to step through the modes (press and hold to cycle through the modes quickly). Modes are accessed in the order shown below. See subsequent sections for details about using diffe...
Page 17 - This mode lets you monitor session distance and current speed.; To access this mode; While in Speed mode
M300 1-17 NAVMAN M300 - Normal operation 5.1.1 Speed mode This mode lets you monitor session distance and current speed. To access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Speed mode • Press to s...
Page 18 - This mode lets you monitor session distance and maximum; Access this mode; Note: The M300 displays distance in units corresponding to speed
M300 1-18 NAVMAN M300 - Normal operation 5.1.3 Speed (Maximum) mode This mode lets you monitor session distance and maximum speed. Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Speed (maximum) ...
Page 19 - This mode shows the current heading in degrees from true; to turn the power on and start normal; While in Heading mode; • Press to store current lap data (the screen briefly shows the
M300 1-19 NAVMAN M300 - Normal operation 5.1.5 Heading mode This mode shows the current heading in degrees from true North. Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Heading mode • Press to...
Page 20 - Clock mode shows the current time and date.; While in Clock mode; Note: If GPS signals are not yet obtained a ‘no GPS’ alert is
M300 1-20 NAVMAN M300 - Normal operation 5.1.6 Clock mode Clock mode shows the current time and date. (Time is only displayed while GPS satellite signals are available. By default, GPS time is displayed. See section 4.1.5 for instructions on setting local time.) Access this mode If necessary, press ...
Page 21 - Timer mode lets you monitor session time, lap number and; While in Timer mode; stops whenever you stop moving.; This mode lets you recall stored lap data.
M300 1-21 NAVMAN M300 - Normal operation 5.1.7 Timer mode Timer mode lets you monitor session time, lap number and current lap time. Up to 50 laps may be stored during each session. Each lap entry resets the current lap time to zero. Access this mode If necessary, press to turn the power on and star...
Page 23 - M300 - Default settings; To restore all default factory settings; ) make sure the unit is off; Restoring default settings; WARNING: Restoring factory default settings clears
M300 1-23 NAVMAN M300 - Default settings To restore all default factory settings 1) make sure the unit is off 2) press and hold to turn the unit on – DO NOT RELEASE 3) while holding , press five times When restoring default settings The screen displays the message ‘reset all’ and a counter. If you st...
Page 24 - Lap
M300 1-24 NAVMAN M300 - Glossary Global Positioning System (GPS) A satellite tracking system. Lap A lap is the distance travelled in the time between the current lap entry and the previous lap entry. Session A session includes all time that the Sport.Tool has been actively operating since first start...
Page 25 - M300 - Warnings and disclaimers
M300 1-25 NAVMAN M300 - Warnings and disclaimers It is the user’s sole responsibility to set-up and use the Navman GPS Sport.Tool (the Product) in a manner that will not cause accidents, personal injury or property damage to you or others. Entering information or handling the Product while moving is...
