National Instruments NI USB-9219 - Manual
National Instruments NI USB-9219 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Dimensions; Hot Surface; Safety Guidelines for Hazardous Voltages; Caution
- Page 3 – not; Related Documentation; DAQ Getting Started Guide; Start»
- Page 4 – LabVIEW
- Page 5 – NI Measurement Studio Help; ANSI C without NI Application Software; NI-DAQmx C Reference Help; .NET Languages without NI Application Software
- Page 6 – Device Documentation and Specifications; Note; Training Courses; Installing the Software; Installing Other Software
- Page 7 – Example Programs; USB Devices Getting Started Guide; Start»All Programs»National Instruments»; Installing the NI USB-9219 Device; Installing the NI USB-9219 Device into the NI USB-9162 Carrier
- Page 8 – Connect the USB cable to the assembled NI USB-9219.; Mounting the NI USB-9219 to a Panel
- Page 9 – Connecting the NI USB-9219 to a Computer; Devices Getting Started Guide; Start»All Programs»National Instruments»NI-DAQ; LED Indicator; LED State
- Page 10 – Wiring the NI USB-9219 Device
- Page 11 – Specifications; Mode
- Page 12 – Wiring TEDS Channels; and enter the info; for information about TEDS sensors.; Grounding and Shielding Considerations
- Page 13 – Voltage and Current Modes
- Page 15 – -Wire Resistance and Quarter-Bridge Modes
- Page 16 – Thermocouple Mode; Excitation Protection
- Page 17 – Input Characteristics
- Page 18 – Overvoltage protection; Gain Error
- Page 19 – Stability; Gain Drift
- Page 20 – Input noise in ppm of Range; NMRR
- Page 21 – Excitation level for Half-Bridge and Full-Bridge modes; Power Requirements
- Page 22 – Safety; Safety Standards; Hazardous Locations
- Page 23 – Environmental; EN 61326 EMC requirements Industrial Immunity; CE Compliance; in the Certification column.
- Page 24 – Environmental Management; For additional environmental information, refer to the; Waste Electrical and Electronic Equipment (WEEE); EU Customers; Calibration; ⬉ᄤֵᙃѻક∵ᵻࠊᄣ⧚ࡲ⊩ ˄Ё; RoHS
- Page 25 – Where to Go for Support; you have access to everything from
USER GUIDE AND SPECIFICATIONS
NI USB-9219
4-Channel, 24-Bit, Universal Analog Input Module
This user guide describes how to use the National Instruments USB-9219
and lists the device specifications.
Introduction
The NI USB-9219 provides a USB interface for four channels of universal
analog input with integrated signal conditioning. The NI USB-9219
consists of two components: an NI 9219 module, and an NI USB-9162
carrier, as shown in Figure 1.
Figure 1.
NI USB-9219 Components
NI 9219
NI USB-9162
NI USB-9219
Hi-SP
eed USB Carrie
r
NI U
SB-9162
Hi-Speed USB Carrie
r
NI U
SB-9162
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
NI USB-9219 User Guide and Specifications 2 ni.com Dimensions Figure 2 shows the NI USB-9219 device dimensions. Figure 2. NI USB-9219 Device in Millimeters (Inches) Safety Guidelines Operate the NI USB-9219 only as described in these operating instructions. Hot Surface This icon denotes that the com...
© National Instruments Corporation 3 NI USB-9219 User Guide and Specifications Caution When module terminals are hazardous voltage LIVE (>42.4 V pk /60 VDC), you must ensure that devices and circuits connected to the module are properly insulated from human contact. You must use the NI 9972 conne...
NI USB-9219 User Guide and Specifications 4 ni.com LabVIEW If you are a new user, use the Getting Started with LabVIEW manual to familiarize yourself with the LabVIEW graphical programming environment and the basic LabVIEW features you use to build data acquisition and instrument control application...
