Msd 8005 Iron Distributor Gear for AMC V8 Installation- User Manual
Msd 8005 Iron Distributor Gear for AMC V8 Installation– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Parts Included:
1 - AMC Iron Gear, PN 8005
AMC Iron Distributor Gear
PN 8005
Important: Read these instructions before attempting the installation.
Note that the MSD Iron gear is only drilled on one side. You will need to install it on the shaft and line
up the hole in the gear with that of the shaft. Finish drilling the hole with a 3/16" drill bit then install the
new roll pin. Be sure to thoroughly clean the shavings away before installing the distributor.
Note: When installing the distributor, coat the entire gear with the supplied gear lubricant.
For information on improving the oil flow to the distributor gear, go to the Tech Support pages
of www.msdperformance.com
1 - Roll Pin
1 - Tube of Gear Lubricant
Parts Included:
1 - AMC Iron Gear, PN 8005
1 - Roll Pin
1 - Tube of Gear Lubricant
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2012 Autotronic Controls Corporation
FRM27186
Revised 01/12
Printed in U.S.A.
Parts Included:
1 - AMC Iron Gear, PN 8005
AMC Iron Distributor Gear
PN 8005
Important: Read these instructions before attempting the installation.
Note that the MSD Iron gear is only drilled on one side. You will need to install it on the shaft and line
up the hole in the gear with that of the shaft. Finish drilling the hole with a 3/16" drill bit then install the
new roll pin. Be sure to thoroughly clean the shavings away before installing the distributor.
Note: When installing the distributor, coat the entire gear with the supplied gear lubricant.
For information on improving the oil flow to the distributor gear, go to the Tech Support pages
of www.msdperformance.com
1 - Roll Pin
1 - Tube of Gear Lubricant
Parts Included:
1 - AMC Iron Gear, PN 8005
1 - Roll Pin
1 - Tube of Gear Lubricant
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
© 2012 Autotronic Controls Corporation
FRM27186
Revised 01/12
Printed in U.S.A.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
