Msd 8410 GM HEI Rotor Installation- User Manual
Msd 8410 GM HEI Rotor Installation– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Parts Included:
1 - HEI Rotor
The MSD GM HEI Rotor will install on stock GM HEI Distributors and the MSD Pro-Billet HEI
Distributor.
1. Remove the distributor cap. Remove the two screws on the side of the rotor and pull the rotor off.
2. Inspect the distributor advance mechanism, springs and weights for wear or damage.
Note: If the distributor has aftermarket weights and bushings, interference between the bottom of the
rotor and the bushing may result. To eliminate the chance of interference, remove approximately
1/10" to 1/8" of the bushing (Figure 1).
Figure 1 Modifying Aftermarket Weight Bushings.
3. For improved protection against spark arc-through, apply a small amount of MSD Spark Guard in
the rotor well area (Figure 2). This is not necessary, just added protection.
4. The Rotor will only install one way. Make sure the aligning slot lines up with the rotor plate mounting
tab (Figure 2). Tighten the screws and install the cap and wires.
MSD GM HEI Rotor
PN 8410
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
