Msd 7550 Programmer_Monitor for Programmable Digital 7- User Manual
Msd 7550 Programmer_Monitor for Programmable Digital 7– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MENU TREE; Figure 2 The Menu Tree.
- Page 3 – MAIN MENUS; NAVIGATING THE MENUS; Main Menu; SAVE MENU; Save
- Page 4 – RPM Limit Menu; Figure 4 Changing the Overrev RPM Setting.; PROGRAMMING A RUN TIMING CURVE
- Page 5 – First Retard Menu; MENU DEFINITIONS
- Page 6 – MENU DEFINITIONS CONT.; is capable of programming including Step Retards, Launch Retards,
- Page 7 – DEFAULT SETTINGS AND ADJUSTMENTS; Display
- Page 8 – Limited Warranty; Service; Proof of Purchase; M S D; TECH NOTES
Figure 1 Button Operation.
These instructions are meant to illustrate the operation of the Programmer/Monitor and how to navigate
its program menus. Reading the instructions as you operate the Programmer to become familiar with
the screens and menus will assist in your programming.
Parts Included
1 – Programmer/Monitor, PN 7550
The PN 7550 Programmer connects to the MSD Programmable Digital-7 Ignition Control with the
supplied 9-pin wiring harness. It can be left connected when making passes or removed. If you choose
to remove it after making changes in the program, you must go to the Save menu to store the new
programs in the Ignition before disconnecting the harness.
There are six buttons on the PN 7550 (Figure 1). The top four are used for programming all of the
features of the PN 7530 Ignition. The two Launch Control buttons put you directly to the Launch RPM
setting adjustment for last minute starting line changes.
ENTER –
This is used to open the selected field for further
programming or to load a new program.
NEXT –
Pressing this button moves the cursor to the next field.
After making an adjustment to a program, pressing NEXT will
take you to the Save menu.
Up (
⇑
) and Down (
⇑
) Arrows
– These buttons are used to change
the settings of programs such as rpm or timing. Pressing the up
button increases the rate while the down arrow lowers it.
LAUNCH REV LIMITER
Pressing one of these buttons takes you directly to the RPM
Launch limit for quick starting line changes. Once at this menu,
use the arrow keys to adjust the rpm limit. Note that this rpm
limit will automatically be saved without having to go to the Save
menu.
Hand Held Programmer/Monitor
for the MSD Programmable Digital-7 Ignition Control
PN 7550
M S D
• W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4
ONLINE PRODUCT REGISTRATION: Register your MSD product online and you’ll be entered
in our monthly 8.5mm Super Conductor Spark Plug Wire give-away! Registering your product
will help if there is ever a warranty issue with your product and helps the MSD R&D team create
new products that you ask for! Go to www.msdperformance.com/registration.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 I N S T A L L A T I O N I N S T R U C T I O N S M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 MENU TREE The following menu tree shows the different screens and programs of the Ignition and Monitor. Figure 2 The M...
I N S T A L L A T I O N I N S T R U C T I O N S 3 M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 When you first turn the ignition on, the Programmer will display a short introduction with MSD, the ignition version a...
4 I N S T A L L A T I O N I N S T R U C T I O N S M S D • W W W . M S D P E R F O R M A N C E . C O M • ( 9 1 5 ) 8 5 7 - 5 2 0 0 • F A X ( 9 1 5 ) 8 5 7 - 3 3 4 4 RPM Limit Menu Press Next until RevMax flashes, then press ENTER. This takes you to the RevMax rpm program screen. Rev...
