Milwaukee 2416-21XC-2367-20 - User Manual
Milwaukee 2416-21XC-2367-20 Hammer Drill – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS.
- Page 3 – BPM
- Page 4 – LIMITED WARRANTY - USA AND CANADA
- Page 5 – LIRE TOUTES LES RÈGLES ET INSTRUCTIONS DE SÉCURITÉ.
- Page 7 – GARANTIE LIMITÉE - AUX ÉTATS-UNIS ET AU CANADA
- Page 8 – LEA TODAS LAS ADVERTENCIAS E INSTRUCCIONES DE
- Page 10 – PÓLIZA DE GARANTÍA - VALIDA SOLO PARA MÉXICO,
- Page 11 – MILWAUKEE ELECTRIC TOOL CORPORATION; UNITED STATES; MILWAUKEE Service; CANADA; CENTRO DE ATENCIÓN A CLIENTES; MEXICO; - Soporte de Servicio MILWAUKEE; Registre su herramienta en línea, en
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
Cat. No.
No de cat.
2416-20
M12™ FUEL™ 5/8" SDS PLUS ROTARY HAMMER
M12™ FUEL™ 5/8" SDS PLUS ROTARY HAMMER
PERCEUSE À PERCUSSION SDS PLUS SANS FIL DE 16
PERCEUSE À PERCUSSION SDS PLUS SANS FIL DE 16 mm
mm (5/8") M12™
(5/8") M12™
ROTOMARTILLO SDS PLUS M12™ INALÁMBRICO DE 16
ROTOMARTILLO SDS PLUS M12™ INALÁMBRICO DE 16 mm
mm (5/8")
(5/8")
SDS
PLUS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 PERSONAL SAFETY GENERAL POWER TOOL SAFETY WARNINGS WORK AREA SAFETY ELECTRICAL SAFETY • Keep work area clean and well lit. Cluttered or dark areas invite accidents. • Do not operate power tools in explosive at- mospheres, such as in the presence of fl am-mable liquids, gases or dust. Power tools...
4 5 FUNCTIONAL DESCRIPTION SPECIFICATIONS Cat. No. Volts DC No Load RPM No Load Blows per Minute Capacities Drill Only Rotary Hammer (concrete) Steel Wood Carbide Tipped Percussion Bit 2416-20 12 0 - 900 0 - 6200 3/8" 1/2" 5/8" SYMBOLOGY • Wear ear protectors. Exposure to noise can cause...
6 7 APPLICATIONS Starting, Stopping and Controlling Speed 1. To start the tool, grasp the handle fi rmly and pull the trigger. NOTE: An LED is turned on when the trigger is pulled. 2. To vary the speed, increase or decrease the pressure on the trigger. The further the trigger is pulled, the greater ...
