Milwaukee 2713-20 - User Manual
Milwaukee 2713-20 Hammer Drill – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – BPM
- Page 3 – OPERATION; ASSEMBLY; WARNING
- Page 4 – Chiseling and Chipping; Maintaining Tool; Cleaning; AVERTISSEMENT
- Page 5 – Insertion/Retrait de la batterie; Attache de poignée latérale
- Page 6 – MANIEMENT
- Page 7 – Cisellement et burinage; Entretien de l’outil; Nettoyage
- Page 9 – OPERACION; ADVERTENCIA
- Page 10 – NOTA; MANTENIMIENTO; ACCESORIOS; dos. Otros accesorios puede ser peligroso.; SOPORTE DE SERVICIO - MEXICO; CENTRO DE ATENCION A CLIENTES
- Page 11 – MILWAUKEE TOOL; PÓLIZA DE GARANTÍA - VALIDA
Cat. No. / No de cat.
2713-20
SDS
PLUS
M18 FUEL™ 1" ROTARY HAMMERS
MARTEAU ROTATIF 25 mm (1") M18 FUEL™
25 mm (1") ROTOMARTILLOS M18 FUEL™
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING
To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT
Afi n de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA
Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instruc-tions, illustrations and specifi ca- tions provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury. Save all warnings and instructions for...
4 5 OPERATION WARNING To reduce the risk of injury, always wear safety goggles or glasses with side shields. To reduce the risk of injury, keep hands away from the bit and moving parts. Selecting Action MILWAUKEE Rotary Hammers have three settings: rotation only, rotary hammer, and hammer only. Alwa...
6 7 6. Snap the head off of the anchor. To remove the head of anchors up to 5/8", grasp the handles fi rmly and pull the tool sharply towards you or s n a p o ff t h e a n c h o r head with a hand ham-m e r a s s h o w n . T h e anchor is now ready to receive a bolt. 7. To r e m o v e t h e a n ...
