Mikrotik RouterBOARD RB4011iGS+5HacQ2HnD-IN - User Manual
Mikrotik RouterBOARD RB4011iGS+5HacQ2HnD-IN Router – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Configuration; . In case IP connection is not available, the; Mounting; We recommend Cat5/6 shielded cables for our devices.; Extension slots and ports; The reset button has the following functions:
- Page 3 – Operating system support; . Other operating systems have not been tested.; Accessories; Power adapter 24 V DC; Specifications
- Page 4 – Federal Communication Commission Interference Statement; Reorient or relocate the receiving antenna.
- Page 5 – Industry Canada; IMPORTANT: Exposure to Radio Frequency Radiation.
- Page 6 – Frequency bands terms of use
RB4011iGS+5HacQ2HnD-IN
The device is already configured with basic settings, you can simply plug in your ISP cable and start using the
Internet. We recommend you to set up a password to secure your device.
Setup
•
Choose your powering solution, please see
•
Connect your Internet cable to port 1, and local network devices to other ports.
•
Set your computer IP configuration to
automatic
(DHCP).
•
Wireless access point mode is enabled by default.
•
Connect your direct input power jack if not using POE, to start up the device.
•
The device will boot up and after short beep Wireless network will be available for connecting.
•
Open network connections on your PC, mobile phone or other device and search for MikroTik wireless
network and connect to it.
•
Once connected to the wireless network, open http://192.168.88.1 in your web browser to start
configuration, since there is no password by default, you will be logged in automatically.
•
We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest
version to ensure the best performance and stability.
•
Choose your country, to apply country regulation settings and set up your password in the screen that
loads.
Powering
The power consumption under maximum load can reach 44 W. The device accepts powering from the power jack
or from the first Ethernet port:
•
Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts 12-57 V DC.
•
First Ethernet port accepts Power over Ethernet 18-57 V DC.
Connecting to a POE Adapter:
1. Connect the Ethernet cable from the device to the POE port of the POE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data
and power flow.
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.
See mikrotik.com/products for the latest version of this document.
Document #50324 Modified on: 28.JUN.2019
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Configuration Once logged in, we recommend clicking the “Check for updates” button in the QuickSet menu, as updating yourRouterOS software to the latest version ensures the best performance and stability. For wireless models, pleasemake sure you have selected the country where the device will be use...
Operating system support The device supports RouterOS software version 6. The specific factory installed version number is indicated in the RouterOS menu /system resource . Other operating systems have not been tested. Accessories Package includes the following accessories that come with the device:...
Federal Communication Commission Interference Statement FCC ID:TV74011GS-5HQ2HD This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmfulinterference...
