Page 2 - Contents
Contents 2 Warning and Safety instructions ............................................................................... 4 Safety instructions and warnings for AP01/AP02/AP03 battery, LG01/LG02charger, LS03/LS04 charger cradle (depending on the model) ............................. 7 Guide to the a...
Page 4 - Warning and Safety instructions
Warning and Safety instructions 4 This vacuum cleaner conforms to current safety requirements. In-appropriate use can lead to personal injury and damage to prop-erty.Please read the operating instructions before using the vacuumcleaner for the first time. They contain important information on thesaf...
Page 5 - Correct application
Warning and Safety instructions 5 Correct application This vacuum cleaner is intended for cleaning flooring in domestic households and similar residential environments. This vacuumcleaner is not suitable for use on construction sites. This vacuum cleaner is not intended for outdoor use. This v...
Page 6 - Technical safety
Warning and Safety instructions 6 Technical safety The vacuum cleaner operates at 25.2 V. It is classified as a class II appliance and is constructed in protec-tion class III.This appliance is supplied by a safety extra-low voltage (SELV) powersource where the voltage is low enough to protect user...
Page 7 - Correct use; Safety with children
Warning and Safety instructions 7 Correct use Do not use the vacuum cleaner without the dust container, pre-fil- ter and fine dust filter fitted. Do not vacuum up anything which has been burning or is still glow- ing e.g. cigarettes, ashes or coal, whether glowing or apparently ex-tinguished. ...
Page 8 - xx
Warning and Safety instructions 8 Technical safety Batteries will deplete over time. They can then leak corrosive flu- ids. Avoid contact with the eyes and skin. In the event of contact,rinse thoroughly with water and seek medical advice. The AP01/AP02/AP03 battery, the LG01/LG02 charger and the...
Page 9 - XX
Warning and Safety instructions 9 XX LG01/LS03/LS04 LG02 01 AT, BE, BG, CH, CL, CZ, DE, DK, EE,ES, FI, FR, GR, HR, HU, IT, KZ, LT,LU, LV, NL, NO, PL, PT, RO, RS, RU,SE, SI, SK, TR, UA, ZA AT, BE, BG, CH, CL, CZ, DE, DK, EE,ES, FI, FR, GR, HR, HU, IT, KZ, LT,LU, LV, NL, NO, PL, PT, RO, RS, RU,SE, SI,...
Page 10 - Cleaning
Warning and Safety instructions 10 Correct use Do not drop or throw the AP01/AP02/AP03 battery. For safety reasons, do not continue to use an AP01/AP02/AP03 battery whichhas been damaged. Keep the AP01/AP02/AP03 battery away from naked flames or other heat sources. Do not heat the AP01/AP02/AP03...
Page 11 - Accessories and spare parts; Only use genuine accessories with the Miele logo on the pack-; Transport; The packaging material protects the vacuum cleaner from trans-
Warning and Safety instructions 11 Accessories and spare parts Only use genuine accessories with the Miele logo on the pack- aging. The manufacturer cannot otherwise guarantee the safety ofthe product. Miele can only guarantee the safety of the appliance when genuine Miele replacement parts are ...
Page 12 - Guide to the appliance
Page 14 - Caring for the environment; Disposing of your old appliance
Caring for the environment 14 Disposing of the packaging ma-terial The packaging material is used for hand-ling and protects the appliance fromtransport damage. The packaging ma-terial used is selected from materialswhich are environmentally friendly fordisposal and can generally be recycled.Recycli...
Page 15 - Disposing of old batteries
Caring for the environment 15 Disposing of old batteries In many cases, electrical and electronicappliances contain batteries which mustnot be disposed of with householdwaste after use. You are legally obligedto remove any old batteries which arenot securely enclosed by the applianceand take them to...
Page 16 - Installation and connection; Assembling the vacuum cleaner; PowerUnit at the bottom; Using the PowerUnit solo
Installation and connection 16 Assembling the vacuum cleaner You can assemble the vacuum cleaner in2 different ways. You can place the suction tube eitherabove or below the PowerUnit. Take care to assemble the vacuumcleaner exactly as shown in the dia-gram. The advantages of placing the PowerUnit ...
Page 17 - Connecting the Comfort handle
Installation and connection 17 Connecting the Comfort handle Depending on how you decide to con-figure your vacuum cleaner, you canconnect the Comfort handle to eitherthe suction tube or the PowerUnit. Push the Comfort handle down ontothe suction tube connector fromabove until it audibly clicks in...
Page 18 - Inserting the battery
Installation and connection 18 Push the PowerUnit connector intothe suction tube from above until itaudibly clicks into place (right imagedetail). Press the release catch to separatethe individual sections from eachother. Inserting the battery Push the battery along the guide linesuntil it aud...
Page 19 - General battery information
Installation and connection 19 To separate the individual sectionsfrom each other, press the releasecatch on the Electrobrush and pull theconnector out of the Electrobrush. General battery information The rechargeable battery is supplied notfully charged.Charge the battery completely beforeusing i...
Page 21 - Wall mounting; Attaching the mounting plate
Installation and connection 21 Wall mounting The supplied wall bracket has a mount-ing plate with a bag of screws attachedto the back.Attach the mounting plate to the pointon the wall where you want the wallmounting to be. Remove the bag of screws. Press the release catch at the bottomof the wal...
Page 22 - Connecting the wall bracket
Installation and connection 22 Attach the mounting plate to the wall. Connecting the accessoriesholder (if required) An accessories holder is supplied forstoring the 3-piece accessory set on thewall bracket (see “Using the accessoriessupplied”). Push the accessories holder onto thewall bracket a...
Page 23 - Charging capacity
Installation and connection 23 Battery charging state indicator(while charging) The battery charging state is displayedon the PowerUnit. Charging capacity Display Approx. 0–34 % Bottom lightflashes slowly Approx. 35–69 % Bottom light islit up; middlelight flashesslowly Approx. 70–90 % Bottom andmidd...
Page 24 - Using the supplied accessories; Upholstery nozzle XL
Using the supplied accessories 24 Miele offers a range of suitable ac-cessories for many special applica-tions (see “Optional accessories”). Upholstery nozzle XL Accessory for cleaning upholstery,mattresses and cushions Crevice nozzle Accessory for cleaning in folds,crevices or corners ...
Page 25 - Multi Floor XXL Electrobrush
Using the supplied accessories 25 Multi Floor XXL Electrobrush Follow the flooring manufacturer ’scleaning and care instructions. Damage caused by trapped ma- terial.Risk of the flooring getting scratched.Make sure that there is no coarse dirtor debris trapped in the bottom ofthe Electrobrush, e.g...
Page 26 - Carpet Care roller brush
Using the supplied accessories 26 Carpet Care roller brush Follow the flooring manufacturer ’scleaning and care instructions. When fitted with this grey roller brush,the Electrobrush can be used to cleandelicate carpets and rugs.Insert the Carpet Care roller brush intothe Electrobrush instead of the...
Page 29 - Use; Switching on and off
Use 29 Switching on and off Pull the plug out of the chargingsocket on the bottom of the battery. If you have been keeping the batteryin the wall bracket, take the vacuumcleaner out of the wall bracket. For the best possible cleaning results,always activate the ComfortCleanfunction before switch...
Page 30 - Illuminating the work area
Use 30 Self-standing function for shortpauses in vacuuming (For safety reasons, this function canonly be used when the PowerUnit is fit-ted at the bottom of the vacuumcleaner)If you are vacuuming with thePowerUnit fitted at the bottom of thevacuum cleaner, you can easily interruptoperation while the...
Page 31 - Maintenance; Purchasing accessories
Maintenance 31 Risk of injury caused by rotating roller brush.You can injure yourself on the rotatingroller brush.Switch the vacuum cleaner off beforedoing any maintenance work. Use theOn/Off switch on the Comfort handleto do this. We recommend using only genuineMiele accessories bearing the “ORI-...
Page 32 - Emptying the dust container; MAX
Maintenance 32 Activating the ComfortCleanfunction Always run the interim cleaning functionfor the fine dust filter before emptyingthe dust container. You should also runit whenever the suction power begins todrop.This enables the vacuum cleaner toachieve the very best cleaning perform-ance again st...
Page 35 - Cleaning the dust container
Maintenance 35 Risk of damage caused by incor- rect cleaning.The pre-filter can become damagedand be less effective as a result.Do not clean the pre-filter with water.Do not use pointed or sharp-edgedobjects to clean the filter. Clean the pre-filter with the dustingbrush supplied or with a dry c...
Page 38 - Error messages; Problem
Error messages 38 Risk of injury caused by rotating roller brush. You can injure yourself on the rotating roller brush.Switch the vacuum cleaner off before dealing with any problems. Use the On/Off switch on the Comfort handle to do this. Error messages are displayed with a quick flashing light on...
Page 39 - Problem solving guide
Problem solving guide 39 Many malfunctions and faults that can occur in daily operation can be easilyremedied. You can save time and money in many cases, as you do not need to callthe Miele Customer Service Department.Information to help you rectify faults yourself can be found at www.miele.com/ser-...
Page 42 - Service; Contact in case of malfunction
Service 42 Information to help you rectify faultsyourself and about Miele spare partscan be found at www.miele.com/ser-vice. Contact in case of malfunction In the event of any faults which you can-not remedy yourself, please contactyour Miele Dealer or Miele Service. Contact information for Miele Se...
Page 43 - Cleaning and care; Vacuum cleaner and accessories
Cleaning and care 43 Risk of injury caused by rotating roller brush.You can injure yourself on the rotatingroller brush.Always switch the vacuum cleaneroff before cleaning it. Use the On/Offswitch on the Comfort handle to dothis. Vacuum cleaner and accessories Risk of electric shock from mains v...
Page 44 - Optional accessories
Optional accessories 44 Follow the flooring manufacturer ’scleaning and care instructions. We recommend using only genuineMiele accessories bearing the Mielelogo on the packaging. Only these willguarantee the optimum performanceof your vacuum cleaner and the bestpossible cleaning results.Please note...
Page 46 - Electrical connection for the UK
Electrical connection for the UK 46 All electrical work should be carried outby a suitably qualified and competentperson in strict accordance with currentnational and local safety regulations (BS7671 in the UK). The voltage and fre-quency are given on the data plate loc-ated underneath the vacuum cl...