Miele Triflex HX2 Cat & Dog - User Manual

Warning and Safety instructions 6  Before and during use, make sure that no coarse dirt or debris is/ gets trapped in the bottom of the Multi Floor XXL Electrobrush or inthe bottom of the Electro Compact handheld brush (supplied de-pending on model).  Store the vacuum cleaner and all accessories a...

Warning and Safety instructions 8  Charge and use the AP01/AP02/AP03 battery at an ambient tem- perature between 0 °C and 45 °C.Using the AP01/AP02/AP03 battery outside of this ambient temper-ature range will limit its performance.  Only the LG01/ xx or LG02/ xx charger included or the LS03/ xx or...

Warning and Safety instructions 9  The AP01/AP02/AP03 lithium-ion battery is subject to the dan- gerous goods legislation. The user is permitted to transport theAP01/AP02/AP03 battery by road without having to observe any fur-ther requirements. Please contact the Miele Customer Service De-partment ...

Warning and Safety instructions 10 Cleaning  Do not immerse the vacuum cleaner or any accessories supplied with it in water.  The Multi Floor XXL Electrobrush and the Electro Compact hand- held brush (depending on the model), the PowerUnit, the suctiontube and the Comfort handle contain electrical...

Warning and Safety instructions 11 Accessories and spare parts  Only use genuine accessories with the Miele logo on the pack- aging. The manufacturer cannot otherwise guarantee the safety ofthe product.  Miele can only guarantee the safety of the appliance when genuine Miele replacement parts are ...

Caring for the environment 14 Disposing of the packaging ma-terial The packaging material is used for hand-ling and protects the appliance fromtransport damage. The packaging ma-terial used is selected from materialswhich are environmentally friendly fordisposal and can generally be recycled.Recycli...

Caring for the environment 15 Disposing of old batteries In many cases, electrical and electronicappliances contain batteries which mustnot be disposed of with householdwaste after use. You are legally obligedto remove any old batteries which arenot securely enclosed by the applianceand take them to...

Installation and connection 16 Assembling the vacuum cleaner You can assemble the vacuum cleaner in2 different ways.  You can place the suction tube eitherabove or below the PowerUnit. Take care to assemble the vacuumcleaner exactly as shown in the dia-gram. The advantages of placing the PowerUnit ...

Installation and connection 17 Connecting the Comfort handle Depending on how you decide to con-figure your vacuum cleaner, you canconnect the Comfort handle to eitherthe suction tube or the PowerUnit.  Push the Comfort handle down ontothe suction tube connector fromabove until it audibly clicks in...

Installation and connection 18  Push the PowerUnit connector intothe suction tube from above until itaudibly clicks into place (right imagedetail).  Press the release catch to separatethe individual sections from eachother. Inserting the battery  Push the battery along the guide linesuntil it aud...

Installation and connection 19  To separate the individual sectionsfrom each other, press the releasecatch on the Electrobrush and pull theconnector out of the Electrobrush. General battery information The rechargeable battery is supplied notfully charged.Charge the battery completely beforeusing i...

Installation and connection 21 Wall mounting The supplied wall bracket has a mount-ing plate with a bag of screws attachedto the back.Attach the mounting plate to the pointon the wall where you want the wallmounting to be.  Remove the bag of screws.  Press the release catch at the bottomof the wal...

Installation and connection 22  Attach the mounting plate to the wall. Connecting the accessoriesholder (if required) An accessories holder is supplied forstoring the 3-piece accessory set on thewall bracket (see “Using the accessoriessupplied”).  Push the accessories holder onto thewall bracket a...

Installation and connection 23 Battery charging state indicator(while charging) The battery charging state is displayedon the PowerUnit. Charging capacity Display Approx. 0–34 % Bottom lightflashes slowly Approx. 35–69 % Bottom light islit up; middlelight flashesslowly Approx. 70–90 % Bottom andmidd...

Using the supplied accessories 24 Miele offers a range of suitable ac-cessories for many special applica-tions (see “Optional accessories”).  Upholstery nozzle XL Accessory for cleaning upholstery,mattresses and cushions  Crevice nozzle Accessory for cleaning in folds,crevices or corners  Dusting...

Using the supplied accessories 25 When fitted with the red roller brush(fitted as standard), the Electrobrushcan be used for daily cleaning of car-pets, rugs and hard floors. For optimum cleaning results on ordin-ary carpets and rugs, use this red rollerbrush.When cleaning delicate carpets andrugs, ...

Use 28 Switching on and off  Pull the plug out of the chargingsocket on the bottom of the battery.  If you have been keeping the batteryin the wall bracket, take the vacuumcleaner out of the wall bracket. For the best possible cleaning results,always activate the ComfortCleanfunction before switch...

Use 29 Self-standing function for shortpauses in vacuuming (For safety reasons, this function canonly be used when the PowerUnit is fit-ted at the bottom of the vacuumcleaner)If you are vacuuming with thePowerUnit fitted at the bottom of thevacuum cleaner, you can easily interruptoperation while the...

Maintenance 30  Risk of injury caused by rotating roller brush.You can injure yourself on the rotatingroller brush.Switch the vacuum cleaner off beforedoing any maintenance work. Use theOn/Off switch on the Comfort handleto do this. We recommend using only genuineMiele accessories bearing the “ORI-...

Maintenance 31 Activating the ComfortCleanfunction Always run the interim cleaning functionfor the fine dust filter before emptyingthe dust container. You should also runit whenever the suction power begins todrop.This enables the vacuum cleaner toachieve the very best cleaning perform-ance again st...

Maintenance 34  Clean the pre-filter with the dustingbrush supplied or with a dry cloth.  After cleaning the fine dust filter andpre-filter, reinsert the former into thelatter by pressing the round cap ontop of the fine dust filter down as faras it will go. To continue achieving the best pos-sible...

Error messages 36  Risk of injury caused by rotating roller brush. You can injure yourself on the rotating roller brush.Switch the vacuum cleaner off before dealing with any problems. Use the On/Off switch on the Comfort handle to do this. Error messages are displayed with a quick flashing light on...

Problem solving guide 37 Many malfunctions and faults that can occur in daily operation can be easilyremedied. You can save time and money in many cases, as you do not need to callthe Miele Customer Service Department.Information to help you rectify faults yourself can be found at www.miele.com/ser-...

Service 39 Contact in case of malfunction In the event of any faults which you can-not remedy yourself, please contactyour Miele Dealer or Miele Service. Contact information for Miele Servicecan be found at the end of this docu-ment. Please note that telephone calls may bemonitored and recorded for ...

Cleaning and care 40  Risk of injury caused by rotating roller brush.You can injure yourself on the rotatingroller brush.Always switch the vacuum cleaneroff before cleaning it. Use the On/Offswitch on the Comfort handle to dothis. Vacuum cleaner and accessories  Risk of electric shock from mains v...

Optional accessories 41 Follow the flooring manufacturer ’scleaning and care instructions. We recommend using only genuineMiele accessories bearing the Mielelogo on the packaging. Only these willguarantee the optimum performanceof your vacuum cleaner and the bestpossible cleaning results.Please note...

Electrical connection for the UK 43 All electrical work should be carried outby a suitably qualified and competentperson in strict accordance with currentnational and local safety regulations (BS7671 in the UK). The voltage and fre-quency are given on the data plate loc-ated underneath the vacuum cl...